ページ1に含まれる内容の要旨
Brine Valve PN 3020511
Installation Manual
� Unique mechanical structure developed according to
scientific principles providing the best reliability.
� Highly expandable interface with replacement
fittings, to coordinate different uses of the control
valve.
� Adjustments are designed for ease of use and fast set-
up.
� Flow control is regulated by the body. Brine valve is
suitable for most water conditioning systems.
Specifications
Dimensions:
32" high unit: 3.2" L x 2.8" W x 27.38" H
(80
ページ2に含まれる内容の要旨
Brine Valve PN 3020511 Brine Well Installation Operation 1. The brine well should be vertically installed in the The brine valve will work with the control valve to regenerant tank. automatically control the water level in the brine tank. 2. All connections should be manually tightened to Another unique feature of the brine valve is the ability to ensure a solid connection. DO NOT over tighten plastic adjust the top support. The top bracket can be moved up parts with a wrench, or you might da
ページ3に含まれる内容の要旨
Brine Valve PN 3020511 Troubleshooting Problem Possible Cause Solutions No water refill into the Brine valve not operating Check that the brine valve is vertical and salt tank moving freely. Water flow is greater than 1.2 gpm (4.5 L/m). Replace the refill control washer with a smaller inside diameter washer. Check to see if there is too much air in the resin tank. Obstruction in regenerant tube or valve Inspect pipline, remove any debris. Damaged brine valve Replace brine valve. Excessive r
ページ4に含まれる内容の要旨
Brine Valve PN 3020511 Parts 9 10 11 No. Description No. Description 1 Threaded connector 13 1/2-inch Lock nut 2 O-Ring, 22 x 1.8 14 3/8-inch Elbow 3 Regenerant tube 15 Pole base 4 Air check seal 16 Check ball 5 Float 17 Plastic pole 6 Rubber stop 18 Inner air check seal 7 Valve base 19 Inner connector 8 Base plug 20 Inner check ball enclosure 9 3/8-inch Retainer sleeve 21 Inner tube support 10 3/8-inch Plastic gripper 22 Fastener ring 11 3/8-inch Nut 23 Inner check seal retainer 12 Support brac