ページ1に含まれる内容の要旨
Cover
Important
Please read PRECAUTIONS, this User’s Manual and Setup Guide (separate
volume) carefully to familiarize yourself with safe and effective usage.
• Please read the Setup Guide (separate volume)
• The latest User’s Manual is available for download from our site:
http://www.eizo.com
ページ2に含まれる内容の要旨
[Location of Caution Statement] Product specifications may vary with sales areas. Confirm the specifications in the manual written in the language of the region of purchase. This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. For overview of the TCO, refer to our website. h t t p : / / w w w . e iz o . c o m Copyright© 2010 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrie
ページ3に含まれる内容の要旨
Notice for this monitor Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suited to applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by war
ページ4に含まれる内容の要旨
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, disinfectant, and abrasive cleaner, which may damage the cabinet or LCD panel. LCD Panel ● • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. • If necessary, stubborn stains can be removed by using the provided ScreenCleaner, or moistening part of a cloth with water to enhance its cleaning power. Cabinet ● • Clean the cabinet with a soft cloth dampened with a li
ページ5に含まれる内容の要旨
CONTENTS Cover ............................................................. 1 2-6. Configuring moving image performance [Overdrive] ..................................................... 26 Notice for this monitor ............................................. 3 Chapter 3 Setting Monitor ................................. 27 CONTENTS ............................................................. 5 3-1. Enabling/Disabling Mode Selection Chapter 1 Introduction ..................................
ページ6に含まれる内容の要旨
CONTENTS 7-4. Displaying Monitor Information ..................... 44 Displaying signal information [Signal Info] ..... 44 ● Displaying monitor information [Monitor Info] ... 44 ● 7-5. Specifications .................................................. 45 7-6. Glossary ........................................................... 49 7-7. Preset Timing .................................................... 52 About TCO’ 03 ..................................................... 53 FCC Declaration of
ページ7に含まれる内容の要旨
Chapter 1 Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • 24” wide format LCD • Wide color gamut of 98% of Adobe RGB • Applicable to the resolution of 1920 dots x 1200 lines • HDCP (High-bandwidth Digital Content Interface) • Frame Synchronous mode supported (23.75 - 30.5Hz, 47.5 - 61Hz) • Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals) • 3 signal input terminals (DVI-I x 2, DisplayPort x 1) • Color Mode function re
ページ8に含まれる内容の要旨
NOTE • This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position. (Refer to “3-4. Setting Orientation [Orientation]” (page 28).) • For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When using the monitor with “Portrait” position, the setting needs to be changed depending on the graphics board used in your PC
ページ9に含まれる内容の要旨
1-3. Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. Disk contents and software overview ● The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme. txt” or the “read me” file on the disk for software startup procedures or file access procedures. Item Overview For For Windows Macintosh A “Readme.txt” or “read me” file √ √ ColorNaviga
ページ10に含まれる内容の要旨
1- 4. Basic Operation and Functions Basic operation of menu 1 Displaying Menu Displaying Adjustment menu Press . The adjustment menu appears. Menu title Current mode Item Settings Menu Displaying SelfCalibration menu Press , The SelfCalibration menu appears. Menu title Current time Item 2 Adjusting/Setting 1. Choose a menu to adjust/set with , and press . 2. Choose an item to adjust/set with , and press . Chapter 1 Introduction 10
ページ11に含まれる内容の要旨
3. Adjust/set the selected item with , and press . 3 Exiting Press a few times. The adjustment menu finishes. Showing Button Guide Press the front buttons (except button), the button guide appears above the button. (When using the monitor with “Portrait” position, the button guide appears next to the button.) Tips • The button guide will continue to appear while the Adjustment menu or Mode menu is showing. • The button guide is displayed differently depending on the selected menu or status.
ページ12に含まれる内容の要旨
Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main Menu Item Adjusting/Setting Color “2-4. Color Adjustment” (page 20) Brightness Contrast Temperature Gamma Advanced Hue Settings Saturation Outline Enhancer Gain Black Level 6 Colors “3-9. Restoring the Default Setting” (page 31) Color Reset Screen “2-5. Displaying Lower Resolutions” (page 26) Screen Size “2-2. Expanding Signal Output Range Range Extension [Range Extension]” (page 16) “2-3. Displ
ページ13に含まれる内容の要旨
The following table shows all SelfCalibration menu’s adjustment and setting menus. Main Menu Item Adjusting/Setting SelfCalibration “4-1. Executing SelfCalibration [Calibration]” Calibration (page 32) “4-2. Checking Calibration Results [Result]” Result Calibration Result (page 32) Ambient Light “4-3. Setting Calibration Details [Setting]” Setting Mode Selection (page 33) Target Schedule Clock Adjustment Chapter 1 Introduction 13
ページ14に含まれる内容の要旨
Chapter 2 Adjusting Screen 2-1. Setting Screen Resolution Compatible Resolutions/Frequencies The monitor supports the following resolutions. Analog Input Resolution Display Mode Frequency Dot Clock 640×480 VGA 60Hz 720×400 VGA TEXT 70Hz 800×600 VESA 60Hz 1024×768 VESA 60Hz 1280×960 VESA 60Hz 170MHz (Max.) 1280×1024 VESA 60Hz 1600×1200 VESA 60Hz 1680×1050 VESA CVT 60Hz 1920×1080 CEA-861 60Hz 1920×1200* VESA CVT RB 60Hz Digital Input (DVI/DisplayPort) Resolution Display Mode Frequency Dot Clo
ページ15に含まれる内容の要旨
Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. Windows 7 ● 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the “Screen Resolution” dialog, select the monitor. 4. Click “Resolution” to select the desired resolution. 5. Click the [OK] button. 6. When a confirmation dialog is displayed, click [K
ページ16に含まれる内容の要旨
2-2. Expanding Signal Output Range [Range Extension] The signal range can be expanded to meet the input signal from 64/1023 - 1019/1023 to 0/1023 -1023/1023. Procedure 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press . 3. Select “On” with or . 4. Press to exit the adjustment. Attention • Settings cannot be performed when CAL mode is being displayed. 2-3. Displaying Screen Correctly Digital Input When digital signals are inp
ページ17に含まれる内容の要旨
Attention • This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It does not work properly when an image is displayed only on a part of the screen (command prompt window, for example) or when a black background (wallpaper, etc.) is in use. • This function does not work correctly with some graphics boards. If the screen is not displayed correctly even after adjusting in step 1 above, perform the adjustments according to the procedures on th
ページ18に含まれる内容の要旨
4 Perform advanced adjustments for the following using the menu of the . Adjust the clock, phase and position, in this order. To eliminate vertical bars [Clock] ● Procedure 1. Choose from the menu, and press . 2. Adjust the clock with or . Press slowly so as not to miss the adjustment point. 3. Press to exit the adjustment. When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering
ページ19に含まれる内容の要旨
5 Adjust the color gradation. To adjust color gradation automatically [Range Adjustment] ● Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen Adjustment Utility” or the screen adjustment pattern files. 2. Choose from the menu, and press . The color gradation is adjusted automatically. When the auto adjustment is completed, a message appears. Select “O
ページ20に含まれる内容の要旨
2-4. Color Adjustment To select the display mode (Color Mode) ● Color Mode allows you to select easily the adequate mode suitable for the monitor’s application. Color Mode Mode Purpose 1-Custom Available for the color settings according to your preference. ® ® 2-Adobe RGB Suitable for color matching with Adobe RGB compatible peripherals. 3-sRGB Suitable for color matching with sRGB compatible peripherals. 4-EBU Suitable for reproducing the color gamut and gamma as set forth by EBU (Eur
