ページ1に含まれる内容の要旨
ZV36TSFSS – GE Monogram 36" Stainless Steel Professional Hood
Dimensions and Specifications (in inches)
28"
12"
18"
25"
35-15/16"
Installation Clearances
These vent hoods are designed to be installed onto a wall or beneath a
Note: Clearances may vary due to type of cooking product and local
soffit or cabinet.
codes. Check with local inspectors to be sure standard is applicable.
• Install these hoods* 30" min. to 36" max. above the cooking surface.
*These hoods may be installed 24" min. above a g
ページ2に含まれる内容の要旨
ZV36TSFSS – GE Monogram 36" Stainless Steel Professional Hood Advanced Planning POWER SUPPLY Ductwork Planning IMPORTANT – (Please read carefully) • These vent hoods are equipped for 10" round ductwork. In most instances WARNING: FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE they may be transitioned to 8" round. PROPERLY GROUNDED. • This hood may be vented vertically through upper cabinets, soffit or ceiling. Remove house fuse or open circuit breaker before beginning installation. A duct transitio
ページ3に含まれる内容の要旨
ZV36TSFSS – GE Monogram 36" Stainless Steel Professional Hood Using Duct Cover Accessories We recommend that the vent hood and decorative duct cover (if used) To avoid unsightly gaps, plan the hood installation height for duct covers be on site before final framing and wall finishing. This will help to use. Use the following formula to calculate the need for one of more accurately locate studs, ductwork and electrical service. duct covers and to ensure a trouble free installation. • Read these
ページ4に含まれる内容の要旨
ZV36TSFSS – GE Monogram 36" Stainless Steel Professional Hood Features and Benefits • 640 CFM Vertical Exhaust •Variable Speed Fan Control •2 Halogen Lamps with 4 Lighting Levels • Infrared Warming Lamp • Utensil Rod • Removable Grease Trays • Removable Baffle Stainless Steel Filters • Model ZV36TSFSS – Stainless steel Specification Revised 3/03
