ページ1に含まれる内容の要旨
2-650-614-12 (1)
FM/MW/LW
Compact Disc Player
GB
Operating Instructions
DE
Bedienungsanleitung
FR
Mode d’emploi
IT
Istruzioni per l’uso
NL
Gebruiksaanwijzing
To cancel the demonstration (DEMO) display, see page 11.
Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 12 nach.
Pour annuler la démonstration (DEMO), reportez-vous à la page 12.
Per annullare la dimostrazione (DEMO), vedere pagina 12.
Om de demonstratie (DEMO) te annuleren, zie pagina 12.
CDX-A250
© 2005 Sony C
ページ2に含まれる内容の要旨
Welcome ! Warning if your car’s ignition has no ACC position Thank you for purchasing this Sony Compact After turning the ignition off, be sure to press Disc Player. You can enjoy your drive with the and hold (OFF) on the unit until the display following functions. disappears. CD playback Otherwise, the display does not turn off and You can play CD-DA (also containing CD this causes battery drain. TEXT*), CD-R/CD-RW (MP3/WMA files also containing Multi Session (page 13)), and ATRAC C
ページ3に含まれる内容の要旨
Table of Contents Getting Started Other functions Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4 Changing the sound settings . . . . . . . . . . . . . . 11 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4 Adjusting the sound characteristics Detaching the front panel . . . . . . . . . . . . . . . . . 4 — BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . 11 Attaching the front panel . . . . . . . . . . . . . . . 5 Customizing the equalizer curve — EQ3 . .
ページ4に含まれる内容の要旨
Getting Started Detaching the front panel You can detach the front panel of this unit to Resetting the unit prevent theft. Before operating the unit for the first time, or Caution alarm after replacing the car battery or changing the If you turn the ignition switch to the OFF connections, you must reset the unit. position without detaching the front panel, the Detach the front panel and press the RESET caution alarm will sound for a few seconds. button with a pointed object, such as a ball
ページ5に含まれる内容の要旨
Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. A B Note Do not put anything on the inner surface of the front panel. 5
ページ6に含まれる内容の要旨
Location of controls and basic operations Main unit CDX-A250 Refer to the pages listed for details. The Card remote commander corresponding buttons on the card remote RM-X151 commander control the same functions as those on the unit. A OFF button OFF ATT To power off; stop the source. SOURCE SEL MODE B Number buttons CD: 1 2 (1)/(2): GP* /ALBM* –/+ + To skip groups/albums (press); skip groups/albums continuously (press and hold). – (3): REP 8 DSPL SCRL (4): SHUF 8 (6): PAUSE 13 2 To paus
ページ7に含まれる内容の要旨
E SEEK –/+ buttons The following buttons on the card remote commander have also different buttons/functions CD: from the unit. To skip tracks (press); skip tracks continuously (press, then press again within ql < (.)/, (>) buttons about 1 second and hold); reverse/fast- To control CD/Radio, the same as (SEEK) forward a track (press and hold). –/+ on the unit. Radio: To tune in stations automatically (press); find w; VOL (volume) +/– button a station manually (press and hold). To adjust vo
ページ8に含まれる内容の要旨
CD Radio Storing and receiving stations Display items Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1 Press (SOURCE) repeatedly until “TUNER” appears. A Source To change the band, press (MODE) B WMA/MP3/ATRAC CD indication repeatedly. You can select from FM1, FM2, C Track number/Elapsed playing time, Disc/ FM3, MW or LW. 1 artist name, Album/group number* , Album/ 2 Press and hold (SENS/BTM) until 2 group name
ページ9に含まれる内容の要旨
Setting AF and TA/TP RDS 1 Press (AF/TA) repeatedly until the desired setting appears. Overview FM stations with Radio Data System (RDS) Select To service send inaudible digital information along AF-ON activate AF and deactivate TA. with the regular radio programme signal. TA-ON activate TA and deactivate AF. Display items AF, TA-ON activate both AF and TA. AF, TA-OFF deactivate both AF and TA. Storing RDS stations with the AF and TA setting You can preset RDS stations along with the AF/ TA
ページ10に含まれる内容の要旨
Local Link function (UK only) Setting CT This function enables you to select other local stations in the area, even if they are not stored on 1 Set “CT-ON” in setup (page 11). your number buttons. Notes 1 During FM reception, press a number button The CT function may not work even though an RDS ((1) to (6)) on which a local station is stored. station is being received. There might be a difference between the time set by 2 Within 5 seconds, press again a number button the CT function an
ページ11に含まれる内容の要旨
After 3 seconds, the setting is complete and Other functions the display returns to normal play/reception mode. Changing the sound settings Tip Other equalizer types are also adjustable. With the card remote commander Adjusting the sound In step 3, to adjust the selected item, press <, M, , characteristics — BAL/FAD/SUB or m. You can adjust the balance, fader, and subwoofer volume. Adjusting setup items — SET 1 Press the select button repeatedly until “BAL,” “FAD” or “SUB” appears. 1 Pres
ページ12に含まれる内容の要旨
Adjusting the volume level A.SCRL (Auto Scroll) To scroll long displayed item automatically Be sure to adjust the volume for each connected when the disc/group/track/album is changed. audio device before playback. – “A.SCRL-ON”: to scroll. 1 Turn down the volume on the unit. – “A.SCRL-OFF” (z): to not scroll. 2 2 Press (SOURCE) repeatedly until “AUX REG* (Regional) FRONT IN” appears. To set “REG-ON” (z) or “REG-OFF” (page 9). 3 3 Start playback of the portable audio device at a LPF* (Low Pa
ページ13に含まれる内容の要旨
Before playing, clean the discs Additional Information with a commercially available cleaning cloth. Wipe each disc from the centre out. Do not use Precautions solvents such as benzine, thinner, commercially available If your car has been parked in direct sunlight, cleaners, or antistatic spray allow the unit to cool off before operating it. intended for analogue discs. Power aerial will extend automatically while the unit is operating. Notes on CD-R/CD-RW discs Some CD-Rs/CD-RW
ページ14に含まれる内容の要旨
ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to ATRAC CD MP3 only. ID tag is 15/30 characters (1.0 and 1.1), ATRAC CD is recorded audio CD data which is or 63/126 characters (2.2, 2.3 and 2.4). WMA tag compressed to ATRAC3 or ATRAC3plus format is 63 characters. using authorized software, such as SonicStage 2.0 or later, or SonicStage Simple Burner. The maximum number of: Playback order of MP3/WMA files – folders (groups): 255 Folder MP3/WMA – files (tracks): 999 (album) The char
ページ15に含まれる内容の要旨
Fuse replacement 3Pull out the release keys to remove the When replacing the fuse, be protection collar. sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, Fuse (10A) consult your nearest Sony 2 Remove the unit. dealer. 1Insert both release keys simultaneously Cleaning the connectors until they click
ページ16に含まれる内容の要旨
MPEG Layer-3 audio coding technology and Specifications patents licensed from Fraunhofer IIS and Thomson. CD Player section Signal-to-noise ratio: 120 dB Design and specifications are subject to change Frequency response: 10 – 20,000 Hz without notice. Wow and flutter: Below measurable limit Tuner section FM Tuning range: 87.5 – 108.0 MHz Lead-free solder is used for soldering certain Aerial terminal: External aerial connector parts. (more than 80 %) Intermediate frequency: 10.7 MHz/450 kH
ページ17に含まれる内容の要旨
The display disappears from/does not appear Preset tuning is not possible. in the display window. Store the correct frequency in the memory. The dimmer is set “DIM-ON” (page 11). The broadcast signal is too weak. The display disappears if you press and hold (OFF). Automatic tuning is not possible. t Press and hold (OFF) on the unit until the Setting of the local seek mode is not correct. display appears. t Tuning stops too frequently: The connectors are dirty (page 15). Press (SENS
ページ18に含まれる内容の要旨
NO AF There is no alternative frequency for the current station. t Press (SEEK) –/+ while the station name is flashing. The unit starts searching for another frequency with the same PI (Programme Identification) data (“PI SEEK” appears). NO ID3 ID3 tag information is not written in the MP3 file. NO INFO Text information is not written in the ATRAC3/ ATRAC3plus or WMA file. NO MUSIC The disc is not a music file. t Insert a music CD. NO NAME A track/album/group/disc name is not written in the
ページ19に含まれる内容の要旨
ページ20に含まれる内容の要旨
Wichtig! Warnhinweis, wenn die Zündung Ihres Bitte nehmen Sie sich etwas Zeit, um Fahrzeugs nicht über eine den Geräte-Pass vollständig Zubehörposition (ACC oder I) verfügt Nachdem Sie die Zündung ausgeschaltet auszufüllen. Dieser befindet sich auf haben, halten Sie am Gerät unbedingt (OFF) der hinteren Umschlagseite dieser gedrückt, bis die Anzeige ausgeblendet wird. Bedienungsanleitung. Andernfalls wird die Anzeige nicht ausgeschaltet und der Autobatterie wird Willkommen! Strom entzog
