ページ1に含まれる内容の要旨
Planning Information
Pro Low-Profile Wall Ventilation Hood
MODEL PW422210(R)
Hand finished Classic stainless
craftsmanship steel finish
Stainless steel Decorative rail
Model PW422210
baffle filters (optional)
Location of
rating plate
Model PW422210R
Rail Option
Welded seams Recessed easy-
and hemmed edges access controls
Halogen lighting Infinite-speed
blower control
Model PW422210R shown with decorative rail.
Wolf Pro wall hoods provide the ultimate in
Wolf Pro low-profile wall hoods are
10" (2
ページ2に含まれる内容の要旨
Planning Information Pro Low-Profile Wall Ventilation Hood MODEL PW422210(R) FEATURES 42" (1067) wide wall ventilation hood with Infinite-speed blower control classic stainless steel finish Heat sentry feature automatically turns unit Rail option wall hoods (R) come with a on when heat is sensed and automatically classic stainless steel decorative rail and adjusts blower speed stand-offs—optional platinum or brass rail Halogen lighting with two settings available to match dual fuel range bezels
ページ3に含まれる内容の要旨
Planning Information Pro Low-Profile Wall Ventilation Hood MODEL PW422210(R) BLOWER OPTIONS SPECIFICATIONS 600 CFM In-Line Blower 808331 Overall Width of Hood 42" (1067) 600 CFM Remote Blower 801640 Overall Height of Hood 10" (254) 900 CFM Remote Blower 801641 Overall Depth of Hood 22" (559) (including rail) 24" (610) Refer to Pro Ventilation Recommendations at the end of this section. In-Line Blower Option 600 CFM Remote Blower Options 600 or 900 CFM ACCESSORIES Discharge Vertical or Horizontal
ページ4に含まれる内容の要旨
Planning Information Pro Low-Profile Wall Ventilation Hood MODEL PW422210(R) INSTALLATION SPECIFICATIONS LOCATION OF 6" E (152) ELECTRICAL 5" 10" (254) (127) HEIGHT OF HOOD 42" (1067) WIDTH OF HOOD 30" TO 36" 30" TO 36" 22" (559) (762–914) (762–914) DEPTH OF HOOD TO COUNTERTOP TO COUNTERTOP NOTE: Pro low-profile hoods have an adjustable discharge. DIMENSIONS Overall Width of Hood 42" (1067) Overall Height of Hood 10" (254) Overall Depth of Hood (excluding rail) 22" (559) Countertop to Bottom o
ページ5に含まれる内容の要旨
Planning Information Pro Low-Profile Wall Ventilation Hood MODEL PW422210(R) INSTALLATION NOTES Refer to the illustrations and specifications IMPORTANT NOTE: Install this ventilation hood for overall dimensions and installation specifics. only with a Wolf blower. Wolf Pro wall ventilation hoods are recom- Pro wall hoods require a separate, grounded mended for use with any Wolf cooking appli- 110/120 V AC, 60 Hz power supply. The service ance, and should be as least as wide as the should have its
ページ6に含まれる内容の要旨
Planning Information Pro Low-Profile Wall Ventilation Hood MODEL PW422210(R) DUCTING CONSIDERATIONS Wolf Pro low-profile wall hoods are shipped The hood will operate most efficiently when without the blower assembly. Internal, in-line ductwork does not exceed 50' (15 m) in length. and remote blower assemblies are available. Local building codes may require the use of IMPORTANT NOTE: Install this ventilation hood make-up air. Consult your local HVAC profes- only with a Wolf blower. sional for sp
ページ7に含まれる内容の要旨
Planning Information Pro Low-Profile Wall Ventilation Hood MODEL PW422210(R) WOLF BLOWER ASSEMBLIES A ventilation system must include a blower Internal blowers are mounted inside the hood assembly. Wolf ventilation hoods are shipped canopy. In-line blowers are mounted in between without the blower assembly. An internal, in-line the hood and the exterior of the home. Remote or remote blower assembly must be selected to blowers can be mounted on the roof or in some accommodate the cooking applianc
ページ8に含まれる内容の要旨
Planning Information Pro Low-Profile Wall Ventilation Hood MODEL PW422210(R) PRO VENTILATION CFM RECOMMENDATIONS Pro Low-Profile Wall Hoods Model PW302210 PW362210 PW422210 PW482210 DF304 / R304 / SRT304 500/600 500/600 DF366 / R366 / SRT366 / RT366 900 900 DF364 / R364 / SRT364 / RT364 900 900 RT362 900 900 DF484 / R484 / SRT484 / RT484 900 Minimum CFM requirements for Wolf ranges and rangetops. CFM recommendations are based on total Btu/hr output. Additional CFM may be required for long duct r
