ページ1に含まれる内容の要旨
3-226-961-11 (1)
FM/AM
Compact Disc
Player
US
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. CDX-CA660X/CA650X Serial No.
For installation and connections, see the supplied installation/connections
manual.
CDX-CA660X
CDX-CA650X
© 2001 Sony Corporation
ページ2に含まれる内容の要旨
Warning Welcome ! This equipment has been tested and found to Thank you for purchasing this Sony Compact comply with the limits for a Class B digital Disc Player. You can enjoy its various features device, pursuant to Part 15 of the FCC Rules. even more with: These limits are designed to provide •Optional CD/MD units (both changers and 1 reasonable protection against harmful players)* . interference in a residential installation. This •CD TEXT information (displayed when a CD 2 equipment generat
ページ3に含まれる内容の要旨
Table of Contents Location of controls .................................................. 4 Other Functions Precautions ................................................................ 6 Using the rotary commander ........................... 16 Notes on discs ........................................................... 6 Adjusting the sound characteristics ................ 18 Quickly attenuating the sound ........................ 18 Getting Started Changing the sound and display settings Resettin
ページ4に含まれる内容の要旨
Location of controls Refer to the pages listed for details. CD/MD : During Playback RADIO : During radio reception TV : During TV reception MENU : During menu mode CDX-CA660X/CA650X 1 MBP (My Best sound Position) button 19 qf ENTER button 2Z (eject) button (located on the front side 12 CD/MD of the unit, behind the front panel) 9, 22 16 RADIO 3 MENU button 9, 11, 12, 13, 15, 19, 20, 9, 11, 12, 13, 15, 19, 20, 21, 22 MENU 21, 22 qg MODE button 4 Volume
ページ5に含まれる内容の要旨
LIST SOUND Card remote commander RM-X114 DSPL MODE + PRESET DISC + SOURCE – + SEEK SEEK DISC – PRESET – OFF ATT + VOL – (DISC/PRESET) (+): to select upwards (SEEK) (+):to select rightwards The corresponding buttons of the card /> remote commander control the same functions as those on this unit. (SEEK) (–): to select 1 DSPL button leftwards/ 2 MENU button . (DISC/PRESET) 3 SOURCE button (–): to select downwards 4 SEEK (
ページ6に含まれる内容の要旨
Precautions Notes on discs •If your car was parked in direct sunlight, •To keep the disc clean, do not touch the allow the unit to cool off before operating it. surface. Handle the disc by its edge. •Power antennas will extend automatically •Keep your discs in their cases or disc while the unit is operating. magazines when not in use. Do not subject •Do not use the CUSTOM FILE feature while the discs to heat/high temperature. Avoid driving, or perform any other function which leaving them in par
ページ7に含まれる内容の要旨
Notes on CD-R discs •You can play CD-Rs (recordable CDs) designed for audio use on this unit. Getting Started Look for this mark to distinguish CD-Rs for audio use. Resetting the unit Before operating the unit for the first time or This mark denotes that a disc is not for audio after replacing the car battery, you must reset use. the unit. Remove the front panel and press the RESET button with a pointed object, such as a ball- point pen. •Some CD-Rs (depending on the equipment used for its re
ページ8に含まれる内容の要旨
Attaching the front panel Detaching the front panel Place hole A of the front panel onto the spindle B on the unit, then lightly push the You can detach the front panel of this unit to left side in. protect the unit from being stolen. Press (SOURCE) (or insert a CD) to operate the unit. Caution alarm If you turn the ignition switch to the OFF position without removing the front panel, the A caution alarm will beep for a few seconds. If you connect an optional amplifier and do not B use the built
ページ9に含まれる内容の要旨
CD Player Setting the clock CD/MD Unit (optional) The clock uses a 12-hour digital indication. Example: To set the clock to 10:08 In addition to playing a CD with this unit, you can also control external CD/MD units. 1 Press (MENU), then press either side of (DISC/PRESET) repeatedly until “CLOCK” Note appears. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. 1 Press (ENTER). Playing a disc The hour indi
ページ10に含まれる内容の要旨
(With optional unit) Playing tracks repeatedly 1 Press (SOURCE) repeatedly to select — Repeat Play “CD” or “MD.” The disc in the main unit will repeat a track or 2 Press (MODE) repeatedly until the the entire disc when it reaches the end. For desired unit appears. repeat play, you can select: Playback starts. •REP-1 — to repeat a track. •REP-2* — to repeat a disc. To Press * Available only when one or more optional CD/ MD units are connected. Skip discs (DISC/PRESET) (+/–) – Disc selection Durin
ページ11に含まれる内容の要旨
Tips • Simply overwrite or enter “_” to correct or erase Labeling a CD — Disc Memo a name. • There is another way to start labeling a CD: Press (For a CD unit with the CUSTOM FILE (LIST) for 2 seconds instead of performing steps function) 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5. You can label each disc with a custom name • You can label CDs on a unit without the CUSTOM (Disc Memo). You can enter up to 8 characters FILE function if that unit
ページ12に含まれる内容の要旨
7 Press (MENU) twice. The unit returns to normal CD play mode. Selecting specific tracks Notes for playback • When the Disc Memo for a CD TEXT disc is — Bank (For a CD unit with the CUSTOM erased, the original CD TEXT information is FILE function) displayed. • If you cannot find the Disc Memo you want to If you label the disc, you can set the unit to erase, try selecting a different CD unit in step 2. skip or play the tracks of your choice. 1 Start playing the disc you want to label. Locating a
ページ13に含まれる内容の要旨
Playing specific tracks only You can select: •BANK-ON — to play the tracks with the Radio ”PLAY” setting. •BANK-INV (Inverse) — to play the tracks with the ”SKIP” setting. The unit can store up to 6 stations per band (FM1, FM2, FM3, AM1, and AM2). 1 During playback, press (MENU), then Caution press either side of (DISC/PRESET) When tuning in stations while driving, use repeatedly until ”BANK-ON,” Best Tuning Memory to prevent accidents. ”BANK-INV,” or ”BANK-OFF” appears. 2 Press the (+) side of
ページ14に含まれる内容の要旨
Receiving the stored Storing only the desired stations stations You can manually preset the desired stations 1 Press (SOURCE) repeatedly to select the on any chosen number button. radio. 1 Press (SOURCE) repeatedly to select the 2 Press (MODE) repeatedly to select the radio. band. 2 Press (MODE) repeatedly to select the 3 Press the number button ((1) to (6)) on band. which the desired station is stored. Tip 3 Press either side of (SEEK) to tune in the Press either side of (DISC/PRESET) to receiv
ページ15に含まれる内容の要旨
5 Press (ENTER). Storing station names Tips • Simply overwrite or enter “_” to correct or erase — Station Memo a name. • There is another way to start storing station You can assign a name to each radio station names: Press (LIST) for 2 seconds instead of and store it in memory. The name of the performing steps 2 and 3. You can also complete station currently tuned in appears in the the operation by pressing (LIST) for 2 seconds display. You can assign a name using up to 8 instead of step 5. cha
ページ16に含まれる内容の要旨
DSPL MODE SOUND Locating a station by Other Functions name — List-up 1 During radio reception, press (LIST). You can also control the unit with a rotary The name assigned to the station currently commander (optional). tuned appears in the display. Using the rotary commander First, attach the appropriate label depending 2 Press either side of (DISC/PRESET) on how you want to mount the rotary repeatedly until you find the desired commander. station. The rotary commander works by pressing If no nam
ページ17に含まれる内容の要旨
1 * Only if the corresponding optional equipment is Changing the operative direction connected. 2 The operative direction of controls is factory- * If your car has no ACC (accessory) position on set as shown below. the ignition key switch, be sure to press (OFF) for 2 seconds to turn off the clock indication To increase after turning off the ignition. By rotating the control To decrease If you need to mount the rotary commander on the right hand side of the steering column, you SEEK/AMS control
ページ18に含まれる内容の要旨
Adjusting the sound Changing the sound and characteristics display settings — Menu You can adjust the bass, treble, balance, and The following items can be set: fader. SET (Set Up) The bass and treble levels can be stored independently for each source. •CLOCK (page 9) •BEEP — to turn the beeps on or off. •RM (Rotary Commander) — to change the 1 Select the item you want to adjust by operative direction of the controls of the pressing (SOUND) repeatedly. rotary commander. Each time you press (SOUN
ページ19に含まれる内容の要旨
P/M (Play Mode) Selecting the sound •LOCAL-ON/OFF (Local seek mode) (page 14) position — Select “ON” to only tune into stations — “My Best sound Position (MBP)” with stronger signals. •MONO-ON/OFF* (Monaural mode) When you drive without passengers, you can (page 14) enjoy the most comfortable sound — Select “ON” to hear FM radio/TV stereo environment with “My Best sound Position.” broadcast in monaural. Select “OFF” to “My Best sound Position” has two presets, return to normal mode. which adjust
ページ20に含まれる内容の要旨
Adjusting the equalizer curve Setting the equalizer 1 Press (MENU). You can select an equalizer curve for seven music types (VOCAL, CLUB, JAZZ, NEW 2 Press either side of (DISC/PRESET) AGE, ROCK, CUSTOM, and XPLOD). repeatedly until “EQ7 TUNE” appears, You can store and adjust the equalizer settings then press (ENTER). for frequency and level. 3 Press either side of (SEEK) to select the Selecting the equalizer curve desired equalizer curve, then press (ENTER). 1 Press (SOURCE) to select a source
