ページ1に含まれる内容の要旨
CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-FX942R
ATT SOUND
KS-FX942R
U
R SOURCE F
D
VOL VOL
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de
desbetreffende handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKS
ページ2に含まれる内容の要旨
How to reset your unit After detaching the control panel, press the reset button on the panel holder using a ball-point pen or a similar tool. This will reset the built-in microcomputer. Note: Your preset adjustments—such as preset channels or sound adjustments—will also be erased. How to use the MODE button If you press MODE, the unit goes into functions mode (“MODE” flashes on the upper part of the display). While in functions mode, the number buttons work as different function buttons. • When
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 OTHER MAIN FUNCTIONS ................ 25 How to use the MODE button ................... 2 Changing the general settings (PSM) ....... 25 Detaching the control panel ...................... 29 LOCATION OF THE BUTTONS ............ 4 Control pa
ページ4に含まれる内容の要旨
LOCATION OF THE BUTTONS Control panel Display window sd f g h j k l /z x c v b n 1 2 3 4 5 6 7 8 KS-FX942R 9p q w e r t y u i o ; a 1 (standby/on/attenuator) button Display window 25 (up) button s Disc information indicators— 23 (tape direction) button TAG (ID3 Tag), (folder), (track/file) 34 /¢ buttons • Lights up only when playing an MP3 disc or a 4 Remote sensor CD Text on a JVC MP3-compatible CD changer. 5 Display window d Tape-in indicator 60 (eject) button f Main display 7 FM AM (DAB) b
ページ5に含まれる内容の要旨
3 • Selects the preset stations while listening to Remote controller the radio (or the DAB tuner). Each time you press the button, the preset station (or service) number increases, and the selected station (or service) is tuned in. ATT SOUND • While playing an MP3 disc on an MP3- compatible CD changer; – Skips to the previous disc if pressed briefly. U – Skips to the previous folder if pressed and held. SOURCE R F Note: While playing a CD on a CD changer, this D always skips to the previous disc
ページ6に含まれる内容の要旨
3. Return the battery holder. Preparing the remote controller Insert again the battery holder by pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. (back side) Remote sensor WARNING: • Store the battery in a place where children cannot reach. • Do not expose the remote sensor to strong If a child accidentally swallows the battery, light (direct sunli
ページ7に含まれる内容の要旨
BASIC OPERATIONS 1 3 2 Turning on the power 3 Adjust the volume. To increase the volume 1 Turn on the power. To decrease the volume Note on One-Touch Operation: Volume level appears. When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. Volume (or audio) level indicator (see page 27) 4 Adjust the sound as you want. (See pages 23 and 24.) To operate the tuner (FM or AM), see pages 9 – 18. To play
ページ8に含まれる内容の要旨
Setting the clock 4 Set the clock system. 1 Select “24H/12H.” You can also set the clock system to either 2 Select “24H” or “12H.” 24 hours or 12 hours. 12 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 26.) 5 Finish the setting. 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. 2 Adjust the hour. Note: 12 To show the clock time on the display, see page 27. To check other information during play, pres
ページ9に含まれる内容の要旨
RADIO OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Searching a station automatically: Manual search Auto search 1 Select the band (FM1 – 3, AM). 1 Select the band (FM1 – 3, AM). Each time you press the button, the band changes as Each time you press the button, the band changes as fo
ページ10に含まれる内容の要旨
3 Tune in to a station you want while Storing stations in memory “MANU” (manual) is flashing. You can use one of the following two methods to To tune in to stations store broadcasting stations in memory. of higher frequencies • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations of lower frequencies FM station automatic preset: SSM You can preset 6 local FM stations in each FM • If you release your finger from
ページ11に含まれる内容の要旨
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band numbers. (FM1, FM2, FM3, and AM) manually. Ex.: Storing FM station of 92.5 MHz into the Notes: preset number 1 of the FM1 band. • A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased when the power supply to 1 Select the band (FM1 – 3, AM) you the memory circuit is interrupted (for example, want to
ページ12に含まれる内容の要旨
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- RDS (Radio Data System) allows FM stations to tracking reception to continue listening to the send an additional signal along with their regular same programme in its finest reception. programme signals. For example, the stations When shipped from the factory, “AF” is selected. send their station names, as well as information about what type of programme they broadcast, • AF:
ページ13に含まれる内容の要旨
Using TA Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the TA Standby Reception allows the unit to switch PSM items appears on the display. temporarily to Traffic Announcement (TA) from the current source (another FM station, tape, or (PSM: see page 26.) other connected components). • TA Standby Reception will not work if you are listening to an AM station. Press TP PTY to activate TA Standby Reception. 2 Select “AF-REG” (alternative frequency/regionaliza
ページ14に含まれる内容の要旨
Using PTY Standby Reception 4 Finish the setting. PTY Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) from the current source (another FM station, tape, or other connected components). 7 When the current source is FM, the PTY • PTY Standby Reception will not work if you are indicator either lights up or flashes. listening to an AM station. • If the PTY indicator lights up, PTY Standby Reception is activated. You can select your favorite pr
ページ15に含まれる内容の要旨
Searching your favorite programme 2 Select one of the twenty-nine PTY codes. (See page 18.) You can search any one of the PTY codes. In addition, you can store your 6 favorite Selected code name programme types in the number buttons. appears on the display. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favorite programme types, see below. 3 Press and hold the number button To search your favorite programme type, see
ページ16に含まれる内容の要旨
• If there is a station broadcasting a programme To search your favorite programme type of the same PTY code as you selected, that station is tuned in. 1 Press and hold TP PTY for more • If there is no station broadcasting a than 2 seconds while listening to an programme of the same PTY code as you FM station. selected, the station will not change. Note: In some areas, the PTY search will not work correctly. Other convenient RDS The last selected PTY code appears. functions and adjustments 2 To
ページ17に含まれる内容の要旨
Changing the display mode while Setting the TA volume level listening to an FM station You can preset the volume level for TA Standby Reception. When a traffic programme is received, You can change the initial indication on the the volume level automatically changes to the display to station name (PS NAME) or station preset level. frequency (FREQ) while listening to an FM RDS • See also “Changing the general settings station. (PSM)” on page 25. • See also “Changing the general settings (PSM)” on
ページ18に含まれる内容の要旨
PTY codes NEWS: News SOCIAL: Programmes on social AFFAIRS: Topical programmes expanding activities on current news or affairs RELIGION: Programmes dealing with any INFO: Programmes which impart aspect of belief or faith, or the advice on a wide variety of topics nature of existence or ethics SPORT: Sport events PHONE IN: Programmes where people can EDUCATE: Educational programmes express their views either by DRAMA: Radio plays phone or in a public forum CULTURE: Programmes on national or TRAVEL
ページ19に含まれる内容の要旨
TAPE OPERATIONS To stop play and eject the cassette Listening to a cassette Press 0. You can play back type I (normal) tapes. Tape play stops, the control panel flips down. The cassette automatically ejects from the cassette compartment. The source changes to the 1 Open the control panel. previously selected one. If you change the source, tape play also stops (without ejecting the cassette this time). • You can also eject the cassette by pressing 0 while the unit is turned off. Note on One-Touch
ページ20に含まれる内容の要旨
To play back tapes recorded with the Dolby B NR* 1 Press MODE to enter the functions mode while listening to a tape. “MODE” flashes on the upper part of the Ex.: When you locate three tunes ahead display. of the current tune Each time you press the buttons, the number 2 Press (Dolby B), while “MODE” is still changes up to ±9. flashing on the display so that the When the beginning of the specified tune is (Dolby B) indicator lights up. located, playback starts automatically. “DOLBY B” also appe
