ページ1に含まれる内容の要旨
2-347-023-12(1)
Compact Disc
Player
Operating Instructions
Thank you for purchasing the Sony Compact Disc Player.
Before operating the player, please read this manual thoroughly
and retain it for future reference.
CDP-D11
ª 1999 by Sony Sound Tec Corporation
ページ2に含まれる内容の要旨
INFORMATION Precautions This equipment has been tested and WARNING found to comply with the limits for a On safety (Refer to the supplied Class B digital device, pursuant to Part “WARNING”.) Notice for the Customers in the 15 of the FCC Rules. These limits are Should any solid object or liquid fall United Kingdom designed to provide reasonable into the cabinet, unplug the recorder and protection against harmful interference have it checked by qualified personnel IMPORTANT in a residential insta
ページ3に含まれる内容の要旨
TABLE OF CONTENTS PREPARATIONS In the beginning ................................................................................................... 4 Connection ............................................................................................................ 4 PLAYBACK ........................................................................................6 VARIOUS OPERATIONS On display window ............................................................................................
ページ4に含まれる内容の要旨
Preparations Preparations èÄîı In the beginning CONNECTION Check that the following accessories are packed. The CD player can be connected with a mixer, an MD • Remote control RM-DS11 (1) recorder or a DAT recorder, etc. Before connection, • Batteries size AA (R6) (2) make sure to turn off each equipment. • Connection cord for control S (1) REMOTE REMOTE ANALOG OUT If any accessory is missing, contact the shop where RS-232C PARALLEL DIGITAL OUT (BAL) you purchased. Inserting batteries into the
ページ5に含まれる内容の要旨
Preparations z To use the supplied remote control as the Position Output level wired remote control Connect the terminal on the front side of the remote +4dBu The signal of -20dB in digital is control and the CONTROL terminal of the main unit output in +4dBu level. with the CONTROL S cord (supplied). When the remote control and the main unit is -10dBu The signal of -20dB in digital is connected with the CONTROL S cord, the infrared ray output in -10dBu level. is not set out from the remote contr
ページ6に含まれる内容の要旨
Basic playback operation Playback 23 4 LOCATE MENU/EXIT DISPLAY VARI A CUE SPEED PUSH MARK/ENTER 1 Turn on the mixer and adjust fader or level of the connected channel. z To use the headphones Connect headphones to PHONE jack in the front panel. 2 Turn on this unit. Adjust the volume by PHONE LEVEL control. 3 Insert the disc. z Playback can be started in 8cm disc can be step 4 by selecting a track played without number. adapter. 1 Turn the AMS control until Label side up the desired track number
ページ7に含まれる内容の要旨
VARIOUS OPERATION Ç¢ÇÎÇ¢ÇÎÇ»çƒê∂ VARIOUS OPERATION ÇÃÇμÇ©ÇΩ On display window Searching for a track Total playing time of the disc, remaining playing time, (AMS/Direct play/Music scan) etc. can be checked in the display window. There are 5 ways for search as follows. AMS is a shortened form of Automatic Music Sensor. DISPLAY AMS± DISPLAY ß MUSIC SCAN Number buttons >20 á P p 0 ) = + 0) á P p á = + 0 ) =/+ 0) To check the remaining time of current playing track or of whole disc How to search Op
ページ8に含まれる内容の要旨
VARIOUS OPERATION “SOUND ON” or “SOUND OFF” can be set as follows. Searching for a 1 Press the MENU/EXIT button in stop mode to display “MENU Mode”. particular point (Search) 2 Turn the AMS control to display 0/) “PAUSE ”. 3 Turn the AMS control to display “SOUND ON” or “SOUND OFF”, then press the AMS control. 4 Press the MENU/EXIT button. 0/) When “OVER” is displayed while pressing 0/) button in pause mode á
P p = + 0 ) It shows that playback goes to the end of the last track. 0) -SLOW- Turn
ページ9に含まれる内容の要旨
Ç¢ÇÎÇ¢ÇÎÇ»çƒê∂ VARIOUS OPERATION ÇÃÇμÇ©ÇΩ z Repeat play can be set with the MENU Mode in the main unit. Repeat playZ 1 Press the MENU/EXIT button to display “MENU Mode”. All tracks are played repeatedly. 2 Turn the AMS control to display “REPEAT Mode”, then press the AMS control. Shuffle play and programmed play can also be 3 Turn the AMS control to display either of “REPEAT repeated. OFF”, “ALL REPEAT” or “1 Track REPEAT”, then press the AMS control. 4 Press the MENU/EXIT button. To repeat a
ページ10に含まれる内容の要旨
VARIOUS OPERATION Playback in random Playback in programmed order (Shuffle play) order (Programmed play) Z Z All tracks are played in random order. Up to 99 tracks can be programmed. PROGRAM CONTINUE CONTINUE Number buttons SHUFFLE >20 CLEAR CHECK á
P p á = + 0 ) =/+ á
P p á 0) 0 ) = + 0) 1 In stop mode, press the PROGRAM 1 In stop mode, press the SHUFFLE button on the remote control. button on the remote control. “P” is displayed in the PLAY MODE position in the display window. “S” is display
ページ11に含まれる内容の要旨
Ç¢ÇÎÇ¢ÇÎÇ»çƒê∂ VARIOUS OPERATION ÇÃÇμÇ©ÇΩ To return to the normal play from the To change the programmed tracks programmed play Before playback starts, the program can be changed. In stop mode, press CONTINUE in the remote control. The indicator of the PLAYMODE position in the display win- dow turns to “C” from “P”. Contents Operation z The same track can be programmed repeatedly. Cancel a track in the 1 Press CHECK repeatedly until the Press the track number as much as times you want middle tra
ページ12に含まれる内容の要旨
VARIOUS OPERATION Note on marking The displayed track number and playing time will be incorrect To return to the specified when the marked point is located in the following cases. • If a point is marked while the minus time is being point (Locate) displayed before play. • If a point is marked in the last several seconds of a track By marking the desired point, you can locate to the by the direct mark. point repeatedly. This is caused by restrictions in the mechanism, and there is no problem for
ページ13に含まれる内容の要旨
Ç¢ÇÎÇ¢ÇÎÇ»çƒê∂ VARIOUS OPERATION ÇÃÇμÇ©ÇΩ To locate the marked point (Locate) To pause after playback Press the LOCATE button. Play is paused at the marked point, and play can be starts from there. of each track (Auto pause) Playback of each track is paused automatically at the beginning of the next track. The function is effective for recording only a track or recording several tracks which are not continual. LOCATE ß LOCATE á P p A•CUE = + 0 ) 0) A•CUE A•PAUSE á á P p P = + 0 ) 0) Notes • Wh
ページ14に含まれる内容の要旨
VARIOUS OPERATION Auto pause and Auto cue To start the sound Track immediately (Auto cue) Portion with sounds Play can starts from the point of sounds by skipping 1st track 2nd track 3rd track the portion with no sounds. This function is effective when you add the sounds to video editing. Auto pause PP P Auto cue PP P MENU/EXIT ß Number buttons z When the track is selected by the number button on A•CUE AMS± A•CUE the remote control A•PAUSE When the track is selected by the number button on the
ページ15に含まれる内容の要旨
Ç¢ÇÎÇ¢ÇÎÇ»çƒê∂ VARIOUS OPERATION ÇÃÇμÇ©ÇΩ Note The variable speed play will be off when the VARI SPEED To change playback button is pressed while the VARI SPEED indicator is lighting speed (Variable speed play) and the button is released without turning the AMS control. Playing time is adjusted by changing playback speed. z Playback speed can be set in the MENU mode. 1 Press the VARI SPEED button so that the VARI Playback speed can be adjusted up to ±12.5% of normal SPEED indicator lights up. sp
ページ16に含まれる内容の要旨
VARIOUS OPERATION Timer playback Last mode memory By connecting with the external timer, playback can be After turning off the power, this unit retains the last started or stopped at the desired time. Refer also to the setting contents. When the power is turned on, this operation manual of the timer. unit can be used in the same settings. The setting contents this unit retains are as follows. • Playback mode (CONTINUE, PROGRAM 1 Turn on the power of the timer. SHUFFLE) • Repeat play mode (ALL
ページ17に含まれる内容の要旨
OTHERS OTHERS ǪÇÃëº ÇªÇÃëº Sizes 430 482 44 LOCATE MENU/EXIT DISPLAY VARI A CUE SPEED PUSH MARK/ENTER Unit: mm To rackmount The unit can be mounted on EIA 19-inch rack. Move the four feet away and mount it on the rack. To move them away, pull out the plastic pins piercing them, then feet will be removed. 17 350 370
ページ18に含まれる内容の要旨
OTHERS Functions of control terminals To the Control terminal (CTRL-S) mixer – mini jack The control terminal of this unit allows external control by connecting system controler equipped with CTRL-S terminal to the unit or with the attached remote control. 1 Playbacks at the first player. 2 After the first player finishes playback, the second Controllable functions player starts playback. Same as those of attached remote control. When a plug is connected to control S terminal, 3 If the other pla
ページ19に含まれる内容の要旨
OTHERS ǪÇÃëº ÇªÇÃëº The user setting of the function of each pin is set as Parallel input/output follows. D-sub 9 pin (female) 1 In stop mode, press MENU/EXIT button to display When a simple circuit is connected to the parallel in/ “MENU Mode”. out terminals, remote control is available. 2 Turn the AMS control to display “Parallel”, then By connecting input terminal and GND, each function press the AMS control. assigned to each terminal can work. 3 Turn the AMS control to display “User”, then p
ページ20に含まれる内容の要旨
OTHERS Notes on the Fader PLAY • Operation in the largest numbered track Precautions To continue the Fader PLAY in the next track, select the track to be played manually. Installation In the largest numbered track, it is designed mechanically Do not place the unit on such as following. that the next track is not selected automatically by • On a rickety stand, uneven surface “AMS+”. So, in the largest numbered track, play is • On a carpet, bedclothes paused when the Fader is turned OFF. • Where
