ページ1に含まれる内容の要旨
CONTENTS
Using AC Power ................................................................................................................ 1
Using Batteries .................................................................................................................. 1
Using DC Power ................................................................................................................ 2
Listening Safely .................................................................................
ページ2に含まれる内容の要旨
SCR-64 Auto-Stop AM/FM Stereo Cassette Recorder OWNER’S MANUAL — Please read before using this equipment. Your RadioShack Auto-Stop AM/FM Stereo • use outlets on different electrical circuits Cassette Recorder is versatile and easy-to- for the equipment and the radio or TV use. You can record from the radio, make a Consult your local Radio Shack store if the live recording of the sounds around you, or problem still exists. just enjoy the radio or cassette player’s high quality sound. The cassett
ページ3に含まれる内容の要旨
1. Press down on the tabs above the battery 2. Insert the barrel plug into the recorder’s compartment cover and pull the cover DC 9V jack. down to remove it. 3. Plug the other end of the adapter into the 2. Place the batteries in the compartment as 12V power source. indicated by the polarity symbols (+ and Notes: –) marked inside. • If the cassette recorder does not operate 3. Replace the cover. properly when you use DC power, be When the sound becomes weak or distorted sure the 12V source (such
ページ4に含まれる内容の要旨
PHONES — connect a pair of TONE HIGH/LOW — slide TONE BAND AM/FM/FM STEREO — slide to se- headphones (not supplied) with to high to enhance the treble lect the band. Select FM STEREO to hear 1 a /8-inch (3.5-mm) plug. Your lo- sound or to LOW to enhance the sound in stereo. If the reception using FM cal RadioShack store carries a bass sound. STEREO is weak, select FM instead. The wide selection of headphones. sound will be monaural, but the reception should improve. 1 Insert the headphones’ /8-i
ページ5に含まれる内容の要旨
3. Load the cassette with its open edge fac- 3. Set BAND to the desired setting. ing up, its full reel to the right, and the 4. Adjust TUNING to the station you want to side you want to play facing out. record. 4. Gently close the compartment door. 5. Press RECORD to begin recording. Both PLAY and RECORD lock down. PLAYING A CASSETTE TAPE 6. Press STOP/EJECT to stop recording. 1. Set FUNCTION to TAPE. Both RECORD and PLAY release. 2. Load a cassette tape. Making Live Recordings 3. Press PLAY. Fo
ページ6に含まれる内容の要旨
3. Open the cassette compartment door and Erasing Tapes press PLAY to expose the tape-handling To record over a cassette tape, simply record parts. as usual. The cassette deck records over the 4. Hold down the erase-protection tab sen- previous recording. sor, then press RECORD to expose the You can quickly erase both sides of a cassette record/playback and erase heads. tape using a RadioShack bulk tape eraser. Note: If you use metal or high-bias type tape, the recorded sound might not be erased
ページ7に含まれる内容の要旨
Modifying or tampering with the cassette re- CARE corder’s internal components can cause a Keep the cassette recorder dry; if it gets wet, malfunction and might invalidate its warranty wipe it dry immediately. Use and store the and void your FCC authorization to operate it. cassette recorder only in normal temperature If your cassette recorder is not performing as environments. Handle the cassette recorder it should, take it to your local RadioShack carefully; do not drop it. Keep the cassette r
