ページ1に含まれる内容の要旨
Operating instructions for the
DA 8-2 Extractor
]ö
M.-Nr. 03 997 810
ページ2に含まれる内容の要旨
Description of the appliance Description of the appliance 1 2 6 5 4 3 2
ページ3に含まれる内容の要旨
Description of the appliance Description of the appliance The DA-8 Extractor draws cooking va- Data plate pors in through the grease filter c and Because the data plate is no longer exhausts them to the outside. visible once the appliance has been in- b Ventilation grill stalled, a 2nd data plate is supplied. It should be placed into the space pro- c Grease filter vided on page 11 of these instructions. d 5’’ (120 mm) diameter exhaust connection e Extraction warning label Do not install the DA
ページ4に含まれる内容の要旨
Help protect our environment Help protect our environment Disposal of packaging Disposal of your old machine The transport and protective packing is Old machines contain materials which mostly manufactured from the following can be recycled. Please contact your re-usable materials: local recycling center or scrap mer- chant about potential recycling pro- . . . Corrugated paper / cardboard - grams, before disposing of the ap- mostly from recycled materials. pliance. . . . Polyethylene foil (PE) -
ページ5に含まれる内容の要旨
Contents Contents Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Help protect our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Warning and safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Cleaning and care . . . .
ページ6に含まれる内容の要旨
Warning and safety instructions Warning and safety instructions Before servicing, disconnect the Before installation and before using power supply by removing the fuse the appliance for the first time read or tripping the circuit breaker. Grasp these operating instructions care- the plug, not the cord, when unplugg- fully to avoid the risk of accidents ing from the wall. and damage to the appliance. Do not use an open flame beside the extractor. When turned on, the The appliance is intended for
ページ7に含まれる内容の要旨
Warning and safety instructions Warning and safety instructions Never leave the unit unattended If exhaust air is to be vented into a when cooking with oil or fat. Very chimney or ventilation duct no hot oil can ignite and damage the ex- longer serving other purposes, seek tractor. professional advice. Try to prevent drops of soup, Ensure there is sufficient ventilation sauce, etc., or residues from the in the room when the extractor is in grease filter from finding their way into operation. the
ページ8に含まれる内容の要旨
Warning and safety instructions Warning and safety instructions Disposal of an old appliance Before disposing of an old ap- pliance, cut the cable off the ap- pliance as close to the housing as possible. The plug and cord should be disposed of and not used elsewhere in the house (electric shock hazard). Text highlighted in boxes is of par- ticular importance, and should be read in conjunction with the warning and safety instructions. 8
ページ9に含まれる内容の要旨
Operation Operation Turn the extractor on before starting to Select a power setting strong cook: enough to clear the air: Turn the control knob f clockwise. Setting 1 = for normal operation. Setting 2 = for removing heavy cooking odors. After cooking Turn the control knob counter clock- wise to ”0“. 9
ページ10に含まれる内容の要旨
Cleaning and care Cleaning and care Before cleaning the extractor dis- Make sure that no particles from the connect it from the main electrical grease filter fall into the interior of supply (pull out the plug or trip the the appliance. If this does happen, circuit breaker). the Service Department will have to be called to clean the appliance, as the fan casing will need to be dis- Grease filter mantled. A re-usable metal grease filter is used to remove solid particles (oil, dust, etc.) Loosen b
ページ11に含まれる内容の要旨
After Sales Service After Sales Service In the event of problems you cannot The address of the nearest Service De- correct yourself, please contact partment is given on the back page. Your Miele Dealer When contacting the Service Depart- ment, please quote the Model and Ser- or ial No. of the appliance. The Miele Service Department Space for enclosed data plate 11
ページ12に含まれる内容の要旨
Electrical connection Electrical connection Electrical connection - CDN Electrical connection - USA The extractor is supplied with a 1.10 m The extractor is supplied with a 4 ft power supply cable ready for connec- cord ready for connection to a tion to a 120 VAC, 60 Hz supply. 120 VAC, 60 Hz power supply. Connec- The rated load is 110 W. Fuse rating is tion should be made in an appropriate 10 A. junction box. The rated load is 110 W. Fuse rating is 10 A. Caution: Make sure the power supply i
ページ13に含まれる内容の要旨
Appliance dimensions Appliance dimensions 3 3/8" 20 3/16" 14 3/16" 19 5/16" 3 1/16" 13
ページ14に含まれる内容の要旨
Installation instructions Installation instructions Depth Width Do not install the DA 8-2 directly (in (= Dimen- next to a gas hob. mm) sion B) (in mm) This extractor is designed for installa- tion between Combiset appliances. 2 zone Combiset It should always be installed between 1 combiset 490 265 two appliances, such as the grill and 2 combisets 490 558 3 combisets 490 851 deep fryer. 4 combisets 490 1144 5 combisets 490 1437 4 zone Combiset 1 combisets 490 560 2 combisets 490 1143 3 combise
ページ15に含まれる内容の要旨
Installation instructions Installation instructions Remove the ventilation grill and Depth Width grease filter. (in (= Dimen- inches) sion B) Unscrew the frame (2 screws) at the (in front and remove. inches) 2 zone Combiset Install the extractor into the cut-out, 1 combiset 19-5/16 10-7/16" from below the countertop, so that 2 combisets 19-5/16 22" the protruding front edge rests on 3 combisets 19-5/16 33-1/2" the countertop. 4 combisets 19-5/16 45-1/16" 5 combisets 19-5/16 56-9/16" Raise the
ページ16に含まれる内容の要旨
Exhaust connection Exhaust connection The exhaust ducting should be as Please read the ”Warning and short and straight as possible. Safety Instructions“ to avoid the danger of toxic fumes. The use of angled pipes should be avoided, as this will reduce the air The DA-8 extractor should be in- flow of the extractor. stalled in accordance with local and Only use ducting made of non- national building regulations. flammable material. The exhaust ducting may be angled The exhaust connection should be
ページ17に含まれる内容の要旨
Exhaust connections Exhaust connections Vent connection variations F 13" 5 1/8" D 7 1/2" 8 1/4" An opening of at least 135 mm (5-5/16") diameter must be cut in the kitchen cabinet in order to allow the In connection examples B and C, exhaust ducting to pass through. neither the KM 88 nor the KM 89 can be installed to the left of the Mount the fan so that the impeller DA 8, since it will not be possible to cannot be inadvertently reached by place a container beneath the oil
ページ18に含まれる内容の要旨
Exhaust connections Exhaust connections Calculation of exhaust ducting Example A pipe diameter of 5" should ensure trouble-free extraction up to a total pipe length of 5.4. meters (17 1/2 ft). Determine the total pipe length as fol- lows: Measure the total length of ducting needed. Add the length of additional ducting to this figure according to the num- Wall vent (1) 1.1 m 43’’ ber and type of bends (see table below). Flexible 90° bend (2) 0.3 m 12’’ Note Flexible pipe (3) 1.0 m 39’’ If the ex
ページ19に含まれる内容の要旨
19
ページ20に含まれる内容の要旨
Alteration rights reserved / 22 / 001 CDN, USA - 4698
