ページ1に含まれる内容の要旨
ATX Computer Case R7329
User Manual
ページ2に含まれる内容の要旨
ATX Computer Case R7329 User Manual Chapter 1 Product Introduction Drawing ………………………………….........................……….. 2 Specification……………………………......................…….……. 2 Chapter 2 Installation Removing and installing side panels..........................................3 Installing the Motherboard.........................................................4 Installing Add-on card ...............................................................4 Installing Dri
ページ3に含まれる内容の要旨
ATX Computer Case R7329 User Manual Chapter 1: Introduction Mechanical Drawing: Specifications: Dimensions 200mm(W) x 430mm(H) x 480mm(D) M/B Type ATX 12” x 9.6” (30.5cm x 24.5 cm); Micro-ATX Material SECC Metal 0.8cm 5.25” Drive Bay 5 (Exposed) 3.5” Drive Bay 2 (Exposed); 5 (Hidden) I/O Panel USB2.0 x 2; MIC x 1; SPK x 1 Cooling System One 80mm front fan ( Intake) (optional); One 80mm rear fan ( Exhaust ) Power Supply Standard ATX PS2, 350W Expansion slot 7 slots 2
ページ4に含まれる内容の要旨
ATX Computer Case R7329 User Manual Chapter 2: Installation Removing and installing side panels 1. Loosen the thumb screws from the back and pull the side panel backward to remove it. 2. Fit the hooks of the panel to the elongated holes on the edges of casing, and slide the panel toward and secure with screws to install the panel. 3
ページ5に含まれる内容の要旨
ATX Computer Case R7329 User Manual Installing the Motherboard 1. Installing the IO panel that comes with Motherboard package. 2. Aiming at the holes on the Motherboard, and secure the copper posts (stand off) on Motherboard plate. 3. Align the holes of PCB and Motherboard plate, and secure them by fastening screws to the cooper posts. Install add-on card 1. Pressing the slot cover and bend forward and backward to remove it. 2. Insert the add-on card. 3. Secure the add-on card wi
ページ6に含まれる内容の要旨
ATX Computer Case R7329 User Manual Installing Drives (CD/DVD ROM, FDD and HDD) 1. Detach the front panel from the casing by pressing the clips that on the rear side of front panel. 2. Remove the metal cover of the bay. 3. Insert the device in place; and secure with screws. Replacing the power device 1. Loosen the screws to remove the power supply. 2. Place the power supply on the power rack with the wiring end facing forward and connect it to the back of the casing. 3. Secure the pow
ページ7に含まれる内容の要旨
ATX Computer Case R7329 User Manual Replacing/Installing the Case Fan Change the Front Fan 1. Loosen the fan screws from the rear casing, and remove the fan. 2. Install the new fan and secure it with screws. I/O Function Panel Installation Guide Please refer to the illustration on the section of USB2.0 and Audio connector from the motherboard user’s manual. The following illustration is a connection diagram for the front panel I/O cable. Please check with your motherboard manual bef
ページ8に含まれる内容の要旨
ATX Computer Case R7329 User Manual Thank you for purchasing Rosewill Product. Please register your product at www.rosewill.com for complete warranty information and future support for your product. 7
