ページ1に含まれる内容の要旨
PLANAR LCD MONITOR PE170 MANUAL www.planar.com
ページ2に含まれる内容の要旨
Table of Contents Table of Contents .................................................................................1 Preface.......................................................................................................2 Chapter 1 Installation...............................................................................3 Unpacking ............................................................................................................................................. 3 Connect
ページ3に含まれる内容の要旨
Preface This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, w
ページ4に含まれる内容の要旨
Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot. After you unpack the LCD Monitor, make sure that the following items were included in the box: *
ページ5に含まれる内容の要旨
Connecting the Display 1. Power off your computer. 2. Connect one end of the signal cable to the LCD Monitor’s VGA port.(See Fig 1-5) 3. Connect the other end of the signal cable to the VGA port on your PC. Figure 1-5 4. Make sure connection are secure. +-Attention This device must be connected to an off-the-shelf video cable in order to comply with FCC regulations. A ferrite-core interface cable is included in the LCD Monitor package. This device will not be in compliance wit
ページ6に含まれる内容の要旨
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 Press the power switch to switch the monitor ON/OFF. DC Power Switch LED lights Green color --- Power is ON. DC Power-On 2 LED lights Yellow --- Monitor is in "Power Saving Mode". Indicator LED is off --- Power is OFF. Function Select Press either left or right control button for OSD (On Screen 3 Buttons Display) menu selection. Adjustmen
ページ7に含まれる内容の要旨
Function Description Ico Function Function Description n Brightness 101 scales of brightness are available to choose from (0 to 100). Contrast 101 scales of contrast are available to choose from (0 to 100). H. Position This function let's you adjust the display's horizontal position V. Position This function let's you adjust the display's vertical position. This function let's you select the images sharpness. Five selections Sharpness are available. A smoother setting is more su
ページ8に含まれる内容の要旨
Icon Function Description CIE coordinated Color Temperature Sets the CIE coordinate color temperature 9300 of 9300°K to 9300°K CIE coordinated Color Temperature Sets the CIE coordinate color temperature 7500 of 7500°K to 7500°K CIE coordinated Color Temperature Sets the CIE coordinate color temperature 6500 of 6500°K to 6500°K Three colors (Red, Green, Blue) can Sets the settings to a by user defined CIE User be adjusted from the OSD menu Temperature. 7
ページ9に含まれる内容の要旨
Chapter 3 Technical Information Specifications LCD Panel Size 17" (43 cm) Display Type Active matrix color TFT LCD Resolution 1280 x 1024 Display Dot 1280 x (RGB) x 1024 Display Area (mm) 337.92 x 270.336 (H x V) Display Color 262K 2 Brightness 250 cd/m (typical) Contrast Ratio 350:1 (typical) Response Time Ta=25°C Tr=8ms Tf=17ms Vertical: -60° ~ +65° Viewing Angle Horizontal: -75° ~ +75° Display Colors 16.7M with FRC or Dithering Video Input Signal Analog RGB 0
ページ10に含まれる内容の要旨
Supports VESA DDC1 and DDC2B functions Plug & Play External Connection Power Input (AC input) AC socket Video Cable 1.8M with 15-pin D-sub connector Environment Temperature 5°C to 40°C/41°F to 104°F Operating Condition: Relative 20% to 80% Temperature -20°C to 60° C/-4°F to140° F Storage Condition: Relative 5% to 85% Power Supply (AC Input) Input Voltage Single phase, 100 ~ 240VAC, 50 / 60 Hz Input Current 1.2 A maximum Size and Weight Dimensions 374 (W) x 394.5 (H) x 204 (D) mm
ページ11に含まれる内容の要旨
Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. H. Freq. V. Freq. Pixel Freq. H/V Sync. Resolution Mode (KHz) (Hz) (MHz) Polarity 640 x 350 31.469 70.087 25.175 +/- VGA-350 640 x 400 24.830 56.420 21.050 -/- NEC PC9801 640 x 400 31.469 70.087 25.175 -/+ VGA-400-GRAPH 640 x 400 31.50 70.15 25.197 -/- NEC PC9821 640 x 480 31.469 59.940 25.175 -/- VGA-480 640 x 480 35.00 66.67 30.24 -/- APPLE MAC-48
ページ12に含まれる内容の要旨
"
F Customer Service Online Support: http://planar.custhelp.com E-mail: desktopmonitors@planar.com Tel: 1-866-PLANAR-1 (1-866-752-6271) Hours: M-F, 8am - 9pm Eastern Time © 2003 Planar Systems, Inc. 05/03 Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice.
