ページ1に含まれる内容の要旨
MONITOR WITH DVD RECEIVER
KVT-614
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new DVD Receiver
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service
ページ2に含まれる内容の要旨
Contents Basic Operations 10 How to read this manual 4 Before Use 6 Notes 7 Navigation Control 16 iPod Control 33 Using the Navigation System 16 Connecting an iPod 33 Control of Other Sources While Displaying Functions When Displaying the Easy the Navigation Screen 16 Control Panel 33 Functions While Displaying the Control Screen 34 Watching DVD/VCD 18 Functions During the Playback Screen 18 USB Device Control 36 Functions When Displaying the Easy Control Panel 19 Functions When Displaying t
ページ3に含まれる内容の要旨
Muting Audio Volume upon Reception Hands Free Unit Control 50 of Phone call 47 Control Screen Function 50 When Received a Call 51 Muting Audio Volume upon Reception of Phone Call 47 Calling by Entering a Phone Number 52 Quick Dialing 52 Controlling Tone-based Services 53 Calling by Phonebook 53 Making a Call Using Outgoing/Incoming Character Entry 48 Call Records 55 How To Use the Character Entry Screen 48 Calling by Voice Recognition 56 Setting Up the Hands-Free Phone 57 Voice Registration 58
ページ4に含まれる内容の要旨
How to read this manual This manual uses illustrations to explain its operations. Seek Mode The displays and panels shown in this manual Sets a station selection. are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. The mode is switched in following order each time you touch the button. Display Setting "AUTO1" Tunes in a station with good reception autom
ページ5に含まれる内容の要旨
English 5
ページ6に含まれる内容の要旨
Before Use • Clean from the center of the disc and move 2WARNING outward. To prevent injury or fire, take the following • When removing discs from this unit, pull them out precautions: horizontally. • To prevent a short circuit, never put or leave any • If the disc center hole or outside rim has burrs, metallic objects (such as coins or metal tools) inside use the disc only after removing the burrs with a the unit. ballpoint pen etc. • Do not watch or fix your eyes on the unit’s display
ページ7に含まれる内容の要旨
Notes About HD Radio (KTC-HR200/HR300) Navigation units that can be connected to When you connect an HD Radio, Tuner features of this unit the unit are disabled and changed to HD Radio tuner • KNA-G510* • KNA-DV4100 features. • KNA-DV3100 • KNA-DV2100 * Update the navigation software to the latest Bluetooth unit that can be connected to version. For how to update the software, refer to the this unit instruction manual of the navigation unit. • KCA-BT200 iPod/iPhone models that can be conne
ページ8に含まれる内容の要旨
Notes About Audio files About Picture files • Playable Audio file • Acceptable picture files AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), JPEG WAV (.WAV) : Linear PCM • Extensions jpg, jpeg ⁄ • If music of normal CD and other playback systems are • Acceptable media recorded in the same disc, only the playback system CD -R/RW/ROM, DVD±R/RW, mass-storage-class recorded at the first setout is played. USB device • Playable disc media Acceptable discs, disc formats, USB device file system, CD-R/
ページ9に含まれる内容の要旨
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 1 6 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks With this DVD, some functions of this unit such as the Symbol Description play function may be restricted depending on the location where the DVD is playing. In this case, the Indicates a region number. The discs with this mark can ALL following marks will appear on the screen. For
ページ10に含まれる内容の要旨
Basic Operations When the monitor is open Security indicator A B C B D E When the monitor is closed Disc loading slot F G H I B Open/Close the monitor Press to open or close the monitor panel • D o not touch the moving components when you are opening or closing the monitor. If you touch the moving components, you may be hurt or the equipment may be damaged. • Do not try to open or close the monitor by hand. ⁄ • You can automatically open or close the monitor when you turn on or off the ignitio
ページ11に含まれる内容の要旨
B A Adjusts the volume Turns power ON/OFF Press the button to turn on the power. When the button is pressed and held down for F 1 second or more, the power is turned off. Attenuates the volume Press it to attenuate the volume. F Press it again to cancel muting. Sets the Loudness Press it for more than 1 second to turn the Loudness function on or off. If turned on, high and low tones are enhanced during low volume. C Playing a disc When y ou load a disc into disc loading slot, the disc starts
ページ12に含まれる内容の要旨
Basic Operations A Playing a USB device When connecting a USB device, playback starts automatically. ⁄ • If the USB source is selected when a USB device is not connected, "No Device" is displayed. • When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the contents in the USB device is changed. • Make sure that the
ページ13に含まれる内容の要旨
A Selecting a source P ress it to display the source select screen. Touch the source button to select the source. Full Source Select screen 2 8 1 Scrolls the source display. 3 ⁄ 1 4 • The displayed source depends on the type of device connected. In addition, you cannot press the button of 5 1 currently unavailable source. 6 The following buttons are always displayed on the 7 7 source select screen and source control screen. 2 Press for at least 2 seconds to erase the buttons. Touch the scree
ページ14に含まれる内容の要旨
Basic Operations A B C C A Screen Setup Switches to the Navigation system Press the button. Press the button to switch the display to the navigation system screen. Displays the Screen Control Screen (page 49). C B Switches to the rear view Switches to the Hands Free control Press it for more than 1 second to switch to Press it for more than 1 second to the Hands rear view. Free control screen. Press it again for more than 1 second to Press it again for more than 1 second to resume the norma
ページ15に含まれる内容の要旨
B Switching the function screen The function control screen switches in the following order each time you press the button. Navigation screen Picture or Video playback screen [FNC] button [FNC] button Easy Control buttons Easy Control buttons appear. appear. Navigation screen Picture or Video playback screen DVD VIDEO Mode:Full AV–OUT:AV–IN SCRN TI DVD VIDEO Title 1 Chap 1 T 0:00:05 IN Easy Control button Easy Control button ⁄ • For the functions of Easy Control buttons, see
ページ16に含まれる内容の要旨
Navigation Control Sets and controls the navigation system function. Using the Navigation System Control of Other Sources While Displaying the Navigation Screen Displays the navigation system screen and makes the navigation function available. Selected source can be controlled while displaying navigation screen. 1 Displaying the navigation screen 1 Display the easy control buttons When "DVD" is selected: 1 2 4 5 2 Setting the navigation system function 3 3 6 Touch the navigation
ページ17に含まれる内容の要旨
When "USB" or "iPod" is selected: When "Bluetooth" is selected: 7 7 8 22 20 20 21 9 23 7 During iPod play : ; Selects a file. Searches Music or Video. a Plays. During USB play : s Pauses. Selects a file. d When touched this area, the source control 8 Plays or pauses. screen appears. 9 When touched this area, the source control ⁄ screen appears. • The Easy Control buttons are hidden when you touch the central part of the screen. When "TUNER" is selected: 10 10 11 11 12 p Tunes in a station. q
ページ18に含まれる内容の要旨
Watching DVD/VCD You can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, see (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 92). Functions During the Playback Screen 5 Backward Chapter Search Area Selects the previous chapter. Basic functions are available even when the 6 DVD Disc Menu Control Buttons Area playback screen is displayed. Displays the Di
ページ19に含まれる内容の要旨
Functions While Displaying the Control Functions When Displaying the Easy Screen Control Panel Switches to the source control screen to use Displays the basic operation buttons on the various playback functions. screen. 1 While the source is playing, press the [FNC] 1 While the source is playing, press the [FNC] button button Mode:Full AV–OUT:AV–IN DVD VIDEO DVD VIDEO Mode:Full AV–OUT:AV–IN SCRN SCRN TI TI 1 1 3 2 DVD VIDEO Title Chap 1 1 T 0:00:05 IN DVD VIDEO Title 1 Chap 1 T
ページ20に含まれる内容の要旨
Watching DVD/VCD 9 Stops playing. DVD Disc Menu When pressed twice, the disc is played from Selects an option from the DVD Disc Menu. its beginning when you play it in the next time. 1 Display the Disc Menu Control screen p Selects a chapter, a scene or a track. DVD VIDEO Mode:Full AV–OUT:AV–IN When the VCD is paused, touch this button to start single-frame stepping. q Plays or pauses. w Slow Forwards or Backwards. (during DVD play) e Switches the Repeat Play operations in the DVD VID
