ページ1に含まれる内容の要旨
INSTRUCTION MANUAL CE42LH2R
CE42LH2DPB
CE42LH2WP
LCD Monitor
Please read this Instruction book before using your LCD monitor.
We wish you many hours of pleasure from your new LCD monitor.
ページ2に含まれる内容の要旨
GB GB TABLE OF CONTENTS Time menu..................................... 9 TABLE OF CONTENTS ........................ 2 Setup menu .................................... 9 SAFETY PRECAUTIONS ....................... 3 PC Adj. menu.................................. .10 Installation and Use.............................. 3 INSTALLATION MODE ........................11 SERVICING .................................. 4 Installation Mode ............................... .11 Servicing ...........................
ページ3に含まれる内容の要旨
GB GB SAFETY PRECAUTIONS CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but following basic rules for its installation, use and servicing. Installation and Use (CE42LH2WP model only) The operating temperature range of this monitor is guaranteed 0°C Do not allow anything to rest on the power ~ 40°C/32°F ~ 104°F. It is not recommended to install the screen cord. Do not locate this LCD monitor where the
ページ4に含まれる内容の要旨
GB GB SERVICING Servicing Your monitor is fully transistorised and does not contain any user serviceable components. You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of orig
ページ5に含まれる内容の要旨
GB GB SERVICING AC Power Cord Requirement The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you purchase it. AC Power Cord for the United States and Canada: GROUND by the Canadian Standard Association (CSA). Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician. THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE End-User License The product (
ページ6に含まれる内容の要旨
AC Mains Outlet GB GB INSTALLATION Step: 1 Mains Connection - nector as required. LD-Net 4. AV3 1. Connect the in-line power connector to the Mains Inlet as shown Composite (CVBS) signal input. above. AV3-OUT can be used to output the incoming AV3 signal to the 2. Connect the power cord of the LCD monitor to a suitable wall outlet. other monitor. As this product does not have a mains On/Off switch, please 5. DVI-D (Digital Video Interface) en
ページ7に含まれる内容の要旨
GB GB INSTALLATION Remote control Standby Input To switch the monitor on and off. Also see page 8. To switch input source from AV1, RGB, AV2, AV3, PC, DVI or Network mode. Recall To display input selection information and the Time set. Wide You can also select colour systems in AV1/AV3 To select the screen mode Full, Full All, Zoom mode as follows: AUTOí PALí SECAMí 16:9, Title in 16:9, Zoom 14:9, Title in 14:9, NTSCí NTSC4.43í PAL Mí PAL N. Normal or Natural wide. Refer to page 12. Auto PC I
ページ8に含まれる内容の要旨
GB GB INSTALLATION Controls and Menus Menu Operation Many of your monitors functions are controlled through the menu function, using the remote control. MENU Picture Brightness Contrast Color Tint (only if NTSC equipment is detected) Sharpness White Tone White Tone / R / G / B Advanced Setting DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode Sound Treble Bass Balance Bass Expander On / Off Time Current Weekday Current Time Schedule 1 - 20 Weekday Time Action Power On / Power Off On Program AV1
ページ9に含まれる内容の要旨
GB GB MENU OPERATION Current Weekday Picture menu or button. Advanced settings Current Time Use the or button to select Advanced settings and press Use to set the current time using the Numeric buttons. the or button to enter the sub menu as follows. Other items in Time Menu should not be selected until Current Time has been set. Schedule Use to set up to 20 separate time schedules for “Power On” or “Power Off”, select 1 ~ 20 using the or button. Weekday DCDi (Directional Correl
ページ10に含まれる内容の要旨
GB GB MENU OPERATION H_Sets is used to divide the horizonal picture into more than one part, but the most is 5 parts (5 monitors). V_Sets is used to divide the vertical picture into more than one part, and the most is also 5 parts (5 monitors). Using the or but- ton to set. H Location is used to select one part of the horizonal picture to dis- play on the current LCD Monitor using the or button. V Location is used to select one part of the vertical picture to display Language is used to s
ページ11に含まれる内容の要旨
GB GB INSTALLATION MODE Address Installation Mode Set the address for the LCD monitor (0 ~ 999). Setting the monitor address in RS232 mode G2.02 0000 Installation Mode On program Off that monitor individually and will not effect to other monitors con- Tuner Menu Off Max Volume 63 nected to a controlling PC Address format command. Winter mode Off The addressing format command is used for operating multiple RC inhibition Off mon
ページ12に含まれる内容の要旨
GB GB OPERATION Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN 16:9, ZOOM 14:9, TITLE IN 14:9, NORMAL or NATURAL WIDE by pressing the WIDE button repeatedly on the Remote Control. When in AV2 (RGBHV) or PC mode FULL or NORMAL can be selected. Note: Full - Set display area 100% Only in DVI or AV2 (YPbPr) displaying high resolution content FULL and FULL ALL are selectable. Note: FULL - Set display area 95% FULL ALL - Set display area 100% All other inputs AV1, AV3, DVI o
ページ13に含まれる内容の要旨
GB GB OPERATION PIP/POP Operation Using this function, you can enjoy a DVI or Network program and an image (AV1, AV2, AV3 or PC input) at the same time. Press the ON/OFF button on the Remote Control repeatly to select PIP1, PIP2, POP or OFF mode. During the PIP/POP mode, press the Main/Sub Picture Swap but- ton will switch the location for main and sub picture. Only the sound on the main picture is heard from the monitor The details for PIP/POP operation (eg,location for sub picture or inp
ページ14に含まれる内容の要旨
GB GB OPERATION (IN TEXT MODE) Teletext Operation Text Cancel Teletext is only available via external sources. Press the TEXT CANCEL button in TEXT or MIX mode, the TV pic- Teletext mode can be operated by the following buttons on the Re- ture appears on the screen. mote Control. Press this button once again or press TXT/TV button, CANCEL mode Some buttons have dual functions. will be cancelled. In CANCEL mode, “CAN” is always displayed on the upper left of the screen. TXT/TV Press TXT/TV but
ページ15に含まれる内容の要旨
GB GB SPECIFICATIONS/HELPFUL HINTS Helpful hints NO PICTURE NO SOUND Power source: 100 ~ 240V 50Hz/60Hz Colour system: PAL/NTSC/NTSC4.43/SECAM AV terminal POOR PICTURE AV1: Scart CENELEC Standard Adjust BRIGHTNESS/CONTRAST levels (too low). Input: Composite video, RGB (5V RGB with 5V sync to pin 14) and audio-L/R Output: composite video from AV3 and audio L/R Adjust COLOUR control. AV2: BNC Input: RGB, H and V/Y, Pb, Pr and audio L/R
ページ16に含まれる内容の要旨
GB GB DIMENSIONS CE42LH2WP Unit: mm 989.0 925.4 (WALL MOUNT SCREW) 10 x M6, 1.0 PITCH x 12MM 1027.0 418.4 418.4 165.9 400.0 953.0 126.0 930.25 200.0 VIEWING AREA(H) 50.8 100.0 41.8 17.6 Handles x 2 402.9 178.5 Control buttons 43.7 417.9 ø4.2 Cables exit terminal cover (RC RECEIVER) ø4.2 (LED INDICATOR) 16 620.0 546.0 523.0 VIEWING AREA(V) 292.0 300.6 400.0 200.0
ページ17に含まれる内容の要旨
GB GB PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING LIST PC signal support timing DVI-D signal support timing Vertical Vertical Resolution Frequency Frequency Remark Resolution Frequency Frequency Remark 720 x 400 31.47 70.09 DOS (VGA) 640 x 480 31.43 59.88 VGA VESA 60Hz 640 x 480 31.43 59.88 VGA VESA 60Hz 640 x 480 37.86 72.81 VGA VESA 72Hz 640 x 480 37.50 75.00 VGA VESA 75Hz 640 x 480 37.5 75 VGA VESA 75Hz 640 x 480 37.86 72.81 VGA VESA 72Hz 640 x 480 34.97 66.6 MAC LC 13" 640 x 480 43.27 85.00
ページ18に含まれる内容の要旨
GB GB RS232C COMMAND TABLES Functional Execution Command Table Image control Read Command Table Command Item Status read command Item C00 POWER ON CR BRIGHT Status of Brightness. C01 POWER OFF CR CONT Status of Contrast. C03 POWER ON/ OFF (toggle) CR COLOR Status of Color. C10 Wide toggle CR TINT Status of Tint. C22 Input CR SHARP Sharpness. C24 Wide “Natural” direct Status of White Balance Mode informa- CR WBAL tion. C25 Wide “Zoom 16:9” direct CR WBAL-R Status of White Balance Red. C26 Wide
ページ19に含まれる内容の要旨
GB GB RS232C COMMAND TABLES Time Read Command Table UK5 Read Command Table (Basic Command) Status read command Item Command Item Note Status of accumulated lifetime of panel. CR0 Power On, Standby, power error, CR PANELH (The same as CR_LAMPH Command) CR1 Input Mode AV1, AV2, . . . , DVI, PC Status of accumulated lifetime of monitor. CR MONH CR WIDE Wide mode Auto, Normal, Full, . . . CR PICTURE Picture mode Dynamic, Standard, . . . CR SIGNAL Signal existence Signal/No signal CR CHILD
ページ20に含まれる内容の要旨
N7RAK/ N7RBK/ N7RPK
