ページ1に含まれる内容の要旨
INSTRUCTION MANUAL PID-42AE1
PID-42AS1
LCD Monitor
Please read this Instruction book before using your LCD monitor.
We wish you many hours of pleasure from your new LCD monitor.
ページ2に含まれる内容の要旨
GB GB TABLE OF CONTENTS Time menu . . . . . . . . . . . . . . . . . . . . . . . . . .11 . . . . . . . . . . . TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . 2 Setup menu . . . . . . . . . . . . . . . . . . . . . . . . .1 . 1 . . . . . . . . . . SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . 3 PC Adj . menu . . . . . . . . . . . . . . . . . . . . . . . .1 .2 . . . . . . . . . . Installation and Use . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . .
ページ3に含まれる内容の要旨
GB GB SAFETY PRECAUTIONS CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this monitor observe the following basic rules for its installation, use and servicing . ADDITIONAL FOR NORTH AMERICA AND CANADA: Installation and Use This monitor must NOT be permanently mounted to the building Do not
ページ4に含まれる内容の要旨
GB GB SERVICING Servicing Your monitor is fully transistorised and does not contain any user serviceable components. You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of orig
ページ5に含まれる内容の要旨
GB SERVICING GB Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules . These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harm
ページ6に含まれる内容の要旨
GB SERVICING GB AC Power Cord Requirement The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you purchase it . AC Power Cord for the United States and Canada: GROUND AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA) . AC Power Cord has a grounding-type AC line plug. This is a safety feature to make sure that the plug will fit into the
ページ7に含まれる内容の要旨
GB SERVICING GB Installation Notice 1. The LCD monitor can be installated by the following two ways: Or Screw holes for installing Screw holes for installing Screws: Spec : M6 X 12MM (metric) Material : Stainless Steel Note: Don't install the TV set reversed as shown below : NG 2. The product should be mounted to wall only as recommended by the manufacturer . 3. T he installation of the bracket must be done by a qualified professional. ● Installing the bracket by unqualified personnel
ページ8に含まれる内容の要旨
AC Mains Outlet GB GB INSTALLATION Step: 1 Mains Connection ■ C onnect the display unit to VGA, BNC and Scart con- nector as required. Mains Inlet 4. AV3 1. Connect the in-line power connector to the Mains Inlet as shown Composite (CVBS) signal input . above . AV3-OUT can be used to output the incoming AV3 signal to the other monitor . 2. Connect the power cord of the LCD monitor to a suitable wall outlet . . DVI-D (Digital Video Interface) ✐ As this product does not have a mains On/Of
ページ9に含まれる内容の要旨
GB INSTALLATION GB Remote control Standby Input To switch the monitor on and off . Also see page 10 . To switch input source from AV1, RGB, AV2, AV3, PC, DVI or Network mode . Recall To display input selection information and the Time set . Wide You can also select colour systems in AV1/AV3 To select the screen mode Full, Full All, Zoom mode as follows: AUTO í PAL í SECAM í 16:9, Title in 16:9, Zoom 14:9, Title in 14:9, NTSC í NTSC4.43 í PAL M í PAL N . Normal or Natural wide . Refer to p
ページ10に含まれる内容の要旨
GB INSTALLATION GB Controls and Menus Menu Operation Many of your monitors functions are controlled through the menu function, using the remote control . MENU Picture Brightness Contrast Color Tint (only if NTSC equipment is detected) Sharpness White Tone White Tone / R / G / B Advanced Setting DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode Sound Treble Bass Balance Bass Expander On / Off Time Current Weekday Current Time ç Schedule 1 - 20 Weekday Time Action Power On / Power Off On Program A
ページ11に含まれる内容の要旨
GB GB MENU OPERATION ■ Current Weekday Picture menu Use to set current weekday using the 1 or 2 button . ■ Advanced settings ■ Current Time Use the 5 or 6 button to select Advanced settings and press Use to set the current time using the Numeric buttons . the 1 or 2 button to enter the sub menu as follows . ✐ O ther items in Time Menu should not be selected until Current Time has been set . ■ Schedule Use to set up to 20 separate time schedules for “Power On” or “Power Off”, select 1 ~ 20 usi
ページ12に含まれる内容の要旨
GB MENU OPERATION GB H_Sets is used to divide the horizonal picture into more than one part, but the most is 5 parts (5 monitors) . V_Sets is used to divide the vertical picture into more than one part, and the most is also 5 parts (5 monitors) . Using the 1 or 2 but- ton to set . H Location is used to select one part of the horizonal picture to dis- play on the current LCD Monitor using the 1 or 2 button . Language is used to select the preferred language . Use the 1 or V Location is used to
ページ13に含まれる内容の要旨
GB GB INSTALLATION MODE ■ Address Installation Mode Set the address for the LCD monitor (0 ~ 999) . ● Setting the monitor address in RS232 mode Installation Mode G2.02 0000 Each monitor can have a specific Address, which helps command On program Off Tuner Menu Off that monitor individually and will not effect to other monitors con- Max Volume 63 nected to a controlling PC Address format command . Winter mode Off The addressing format command is used for operating multiple RC inhibition Off
ページ14に含まれる内容の要旨
GB GB OPERATION Selection of picture size Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN 16:9, ZOOM 14:9, TITLE IN 14:9, NORMAL or NATURAL WIDE by pressing the WIDE button repeatedly on the Remote Control . ✐ When in AV2 (RGBHV) or PC mode FULL or NORMAL can be selected . Note: Full - Set display area 100% ✐ Only in DVI or AV2 (YPbPr) displaying high resolution content FULL and FULL ALL are selectable . Note: F ULL - Set display area 95% FULL ALL - Set display area 100% All o
ページ15に含まれる内容の要旨
GB OPERATION GB PIP/POP Operation Using this function, you can enjoy a DVI or Network program and an image (AV1, AV2, AV3 or PC input) at the same time . Press the ON/OFF button on the Remote Control repeatly to select PIP1, PIP2, POP or OFF mode . During the PIP/POP mode, press the Main/Sub Picture Swap but- ton will switch the location for main and sub picture . ✐ Only the sound on the main picture is heard from the monitor speaker. The sound on the sub-picture cannot be heard. ✐ The det
ページ16に含まれる内容の要旨
GB GB OPERATION (IN TEXT MODE) Teletext Operation Text Cancel Teletext is only available via external sources . Press the TEXT CANCEL button in TEXT or MIX mode, the TV pic- Teletext mode can be operated by the following buttons on the Re- ture appears on the screen . mote Control . Press this button once again or press TXT/TV button, CANCEL mode ✐ Some buttons have dual functions . will be cancelled . In CANCEL mode, “CAN” is always displayed on the upper left of the screen . TXT/TV Press T
ページ17に含まれる内容の要旨
GB GB SPECIFICATIONS/HELPFUL HINTS Specification Helpful hints Common specification ■ NO PICTURE NO SOUND Power source: 100 ~ 240V 50Hz/60Hz ● Check if monitor is plugged in. Colour system: PAL/NTSC/NTSC4 .43/SECAM ● Check monitor is not in standby mode. AV terminal ■ POOR PICTURE AV1: Scart CENELEC Standard ● Adjust BRIGHTNESS/CONTRAST levels (too low) . Input: C omposite video, RGB (5V RGB with 5V sync to pin 14) and audio-L/R ■ NO COLOUR, PICTURE OK Output: composite video from AV3
ページ18に含まれる内容の要旨
GB GB DIMENSIONS Unit: mm 1002.8 971.5 1010.3 (WALL MOUNT SCREW) 100 4 x M6, 1.0 PITCH x 12MM 940 397.2 55 932.3 23.5 330 VIEWING AREA(H) Control buttons 1002.8 971.5 400 LED INDICATOR RC RECEIVER 1010.3 (WALL MOUNT SCREW) 100 4 x M6, 1.0 PITCH x 12MM 940 397.2 55 932.3 23.5 330 VIEWING AREA(H) Control buttons 400 18 LED INDICATOR RC RECEIVER 603.3 533 525.3 VIEWING AREA(V) 603.3 533 525.3 400 VIEWING AREA(V) 45 125.6 51.6 5 400 45 125.6 5 51.6
ページ19に含まれる内容の要旨
GB GB PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING LIST ■ PC signal support timing ■ DVI-D signal support timing Horizontal Vertical Horizontal Vertical Resolution Frequency Frequency Remark Resolution Frequency Frequency Remark (kHz) (Hz) (kHz) (Hz) 720 x 400 31 .47 70 .09 DOS (VGA) 640 x 480 31 .43 59 .88 VGA VESA 60Hz 640 x 480 31 .43 59 .88 VGA VESA 60Hz 640 x 480 37 .86 72 .81 VGA VESA 72Hz 640 x 480 37 .50 75 .00 VGA VESA 75Hz 640 x 480 37 .5 75 VGA VESA 75Hz 640 x 480 37 .86 72 .81 VGA VESA
ページ20に含まれる内容の要旨
GB GB RS232C COMMAND TABLES ■ Functional Execution Command Table ■ Image control Read Command Table Command Item Status read command Item C00 POWER ON CR BRIGHT Status of Brightness . C01 POWER OFF CR CONT Status of Contrast . C24 Wide “Natural” direct CR COLOR Status of Color . C25 Wide “Zoom 16:9” direct CR TINT Status of Tint . C26 Wide “Title in 16:9” direct CR SHARP Sharpness . C27 Wide “Zoom 14:9” direct Status of White Balance Mode informa- CR WBAL tion . C28 Wide “Title in 14:9” d
