ページ1に含まれる内容の要旨
7" Wide LCD Monitor
With4 Mounting Options
PLVH7IP
INSTRUCTION MANUAL
www.pyleaduio.com
ページ2に含まれる内容の要旨
Table of Contents About the liquid crystal display (LCD) panel 2 Precautions 3 Control & Layout for monitor / wireless remote 4 Accessories 5 Connection diagram 6 Replacing the remote control battery 6 Installing headrest with shroud 7-8 Installing sun-visor with shroud 9-10 Installing of headrest case 11 Function Setting 12-18 Troubleshooting guide 18 Specifications 19 1
ページ3に含まれる内容の要旨
About the liquid crystal display (LCD) panel 1. Do not press on the LCD panel on the monitor unit as doing so can distort the picture or cause a malfunction, the picture may become unclear, or the LCD panel may be damaged. 2. Notes on cleaning -clean the LCD panel with a slightly damp soft cloth. - do not use solvents such benzine, thinner, commercially available cleaners or antistatic spray. o o o o 3. Do not use this unit temperatures under 5 C (41 F) or over 45 C (113 F). 4. If your car wa
ページ4に含まれる内容の要旨
Precautions Please read this manual completely and carefully prior to attempt to install your new car video equipment. Install correctly, your new equipment will provide you with years of enjoyable and safe usage. Installing this unit requires technical expertise. This unit should be installed by a qualified technician or service personnel. If you try to install this unit by yourself, do it properly, referring to the installation and wiring diagrams in this operating manual. Improper installati
ページ5に含まれる内容の要旨
Control and layout for the monitor MMI Input Front audio video input (Plug & Play for Ps2 or games) Blue screen when Front Audio Output Remote Sensor no video signal Front audio output Remote control IR sensor (headphones) Power On / Off Front A/V Input Turn on/off the monitor Front audio video input Menu Press to display MENU Power Cord with functions and setting (Male) Adjust Increase Adjust Decrease This multipurpose button This multipurpose button serves serves to increase the selected t
ページ6に含まれる内容の要旨
Accessories Universal Stand Headrest& Sun Visor Shroud Headrest Bag Remote Control Extension Min Din Cable Key-for removing the monitor from headrest or visor shroud AV Cable INSTRUCTION MANUAL Earphone Instruction Manual 5
ページ7に含まれる内容の要旨
Earphone Fuse replacement Never use fuse with an amperage rating Connection Diagram exceeding the one supplied with the unit as this could damage the unit. When replacing the fuse, be sure to use one that matches the amperage described on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest your’s dealer. Blue screen when 1 no video signal 2 Fuse
ページ8に含まれる内容の要旨
Steps For Installing Headrest with Shroud Setup work Remove the headrest and set it in an uncluttered work area. Pay the appropriate precautions to ensure that it is not damaged during the installation. CAUTION: make sure the screws are not long enough to go through the headrest! If you have any doubts about this type of installation, please consult your local mobile electronics retailer. Cutting and making holes in the headrest will cause electronic damage which is expensive to repair. Measurem
ページ9に含まれる内容の要旨
Route the cable through the headrest Run the supplied cable through the opening and out to the bottom of the headrest. If possible, conceal the wires witha shaft covering. Connect the power, ground and video leads to test the MONITOR. Before connecting the monitor, pull the connecting cable through the headrest shroud as shown in diagram. Place the headrest housing into the opening and secure with correct fasteners. Install the headrest shroud Pull the connecting cable through the center of the
ページ10に含まれる内容の要旨
Steps For Installing Sun-visor with Shroud Setup work Remove the visor and set it in an uncluttered work area. Pay appropriate precautions to ensure that it is not damaged during the installation. CAUTION: make sure the screws are not long enough to go through the visor! If you have any doubts about this type of installation, please consult your local mobile electronics retailer. Cutting and making holes in the visor will cause electronic damage which is expensive to repair. Measurements Press
ページ11に含まれる内容の要旨
Route the cable through the visor Run the supplied cable through the opening and out to the bottom of the visor. If possible, conceal the wires using a shaft covering. Connect the power, ground and video leads to test the MONITOR. Before connecting the monitor, pull the connecting cable assembly through the visor housing as shown in diagram. Place sun-visor shroud into the opening and secure it with correct fasteners. Install the sun-visor shroud Pull the connecting cable through the center of t
ページ12に含まれる内容の要旨
Steps For Installing Headrest Bag Insert the monitor to the headrest bag Put the monitor with headrest bag at the rear side center of pillow. Rear side of headrest Cut the magic tape to the fit your pillow size, then fasten it as X as diagram show. Front side of headrest 11
ページ13に含まれる内容の要旨
Function setting SOURCE Press MENU button (1)from the remote or press manu button (1) from the monitor to call out the function menu, press button (2 or 3) to the desired setting. AV1 AV2 AV3 2 RETURN 1 3 Monitor Remote SOURCE When screen appears “SOURCE” Press Menu button (1) to enter video signal input selection. [The symbol show current video input.] AV1 AV2 2 AV3 1 RETURN 3 Monitor Remote SOURCE Press the button( 2or3) to move the symbol and choose video signal input. Press me
ページ14に含まれる内容の要旨
PICTURE When screen appears “PICTURE” press the menu button (1)to enter picture parameters setting. BRIGHT CONTRAST 2 COLOR RETURN 1 3 Monitor Remote PICTURE Press the button( 2or3) to adjust the symbol to choose “BRIGHT”. Press menu button (1) to enter BRIGHT setting. [Brightness: Makes black appear darker or lighter] BRIGHT CONTRAST 2 COLOR 1 RETURN 3 Monitor Remote PICTURE Press button 2: adjust brightness to lighter level. Press button 3: adjust brightness to darker level. Press butto
ページ15に含まれる内容の要旨
PICTURE Press the button( 2or3) to adjust the symbol to choose “CONTRAST”. Press menu button (1) to enter CONTRAST setting. [Contrast: Narrows or widens the gap between black & white (darken & brighten)] BRIGHT CONTRAST 2 COLOR 1 RETURN 3 Monitor Remote PICTURE Press button 2: adjust contrast to brighter level. Press button 3: adjust contrast to darker level. Press button 1 to confirm setting. [Contrast adjustable level: 0~100 . Preset: 50] 2 1 CONTRAST 50 3 Monitor Remote PICTURE Press
ページ16に含まれる内容の要旨
PICTURE Press button 2: adjust more color intensity level. Press button 3: adjust less color intensity level. Press button 1 to confirm setting and exit. [Color adjustable level: 0~100 . Preset: 50] 2 1 COLOR 50 3 Monitor Remote PICTURE Exit Picture setting, Press the button( 2or3) to adjust the symbol to “RETURN”. Press menu button (1) to exit. BRIGHT CONTRAST 2 COLOR 1 RETURN 3 Monitor Remote AUDIO When screen appears “PICTURE” press the menu button (1)to enter picture parameters settin
ページ17に含まれる内容の要旨
AUDIO Press button 2: adjust sound to more loud level. Press button 3: adjust sound to more soft level. Press button 1 to confirm setting and exit. [Volume adjustable level: 0~100 . Preset: 50] 2 1 VOLUME 50 3 Monitor Remote FUNCTION When screen appears “FUNCTION” press the menu button (1)to enter function parameters setting. Press the button( 2or3) to adjust the symbol to choose desired setting INVERT 1 SIZE: 2 Full 16:9 1 Language Select: RETURN 3 Monitor Remote FUNCTION When the sym
ページ18に含まれる内容の要旨
Normal 4:3 Full 16:9 FUNCTION Diagram Diagram When the symbol at “SIZE” Press the MENU (1) INVERT 1 button repeatedly to change the picture display size to Full 16:9 or Normal 4:3 as the diagram show. SIZE: Full 16:9 2 Language Select: RETURN 1 3 Monitor Remote FUNCTION When the symbol at “Language Select:” Press the MENU (1) button to enter the OSD languages display. INVERT 1 SIZE: 2 Full 16:9 1 Language Select: RETURN 3 Monitor Remote FUNCTION Press the buttons 2 or 3 to th
ページ19に含まれる内容の要旨
FUNCTION When the symbol at “Exit” Press the MENU (1) button to exit the setup. Exit 2 1 3 Monitor Remote Troubleshooting guide The following checklist will help you solve problems you may encounter with your unit. Before going through the checklist below, check the connection and operating. if you can not solve the problem with follows guide, please contact your nearest dealer. Problem Cause/solution The power cord or battery has been disconnected. No picture, no sound The fuse has blown. Press
ページ20に含まれる内容の要旨
Specifications: LCD Drive Method: a-SI TFT Active Matrix Visible Screen Size: 7 Inch Wide Screen (Diagonal) Aspect Ratio: 16:9 Display Format: 480 x RGB x 234 Number of Pixels: 336,960 Response Time: 15ms Backlight : High Brightness CCFT 2 #3 Luminance: 380 cd/m #1 Backlight Life: 15,000 Hrs Contrast Ratio: 300:1 o o Viewing Angle: (H/V): 120 / 100 o o o o Operation Temperature: -20 C ~ 70 C / -2 F ~ 158F Video Color System Input: NTSC & PAL Compatible On Screen Display: Multi Languages (En
