ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Contents Thank you for purchsing this product. * Please read this owner's manual carefully before installation and operating this unit and follow up all instructions for safe connecting, operating this product. Otherwise, the unit can be damaged. * Pleas keep this manual in a handy place for future use. Contents Precaution................................................................................... 2 Handling Discs ...........................................................................
ページ3に含まれる内容の要旨
Precautions WARNING Warning Screen While the vehicle is in motion, the monitor only shows "WARNING PICTURE" to prevent trafficaccident. Stop the car in a safe location and apply the parking break to watch the picture. 1. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 2. When the temperature of the unit falls such as during winter, the monitor screen will become darker than usual. Normal brightness will return after using the monitor for a while. 3.
ページ4に含まれる内容の要旨
Handling Discs Playable Discs This product only requires using of 12cm following circular discs. DVD-R, DVD-RW, CD-R and CD-RW can be played back, but it depends on the recorded condition. Region number(Regional restriction number) 1 - USA, CANADA 2 - EUROPE, JAPAN, SOUTH AFRICA, MID EAST ASIA 3 - KOREA, SOUTH ASIA 4 - LATIN AMERICA, SOUTH AMERICA, AUSTRALIA, NEW ZELAND 5 - RUSSIA, INDIA, MONGOLIA, AFRICA 6 - CHINA 7 - ALL COUNTRY The Region number of this unit is set at your region numb
ページ5に含まれる内容の要旨
Operating with the main unit Number Radio TV DVD/CD 1. VOLUME Volume Down 2. VOLUME Volume Up 3. MODE Short Key: Mode/Power On POWER Long Key: Powe Off 4.OPEN/CLOSE Monitor Open/Close 5. JOG Ch Seek Up Upper 6. JOG Ch Seek Down Downward 7. JOG Ch Tune Down To the Left 8. JOG Ch Tune Up To the Right 9. JOG Center Band Enter 10. MUTE Mute 11. FUNC Setting Sounds 12. Preset 1 Preset 1 Track/Chapter/Fast Forward 13. Preset 2 Preset 2 Track/Chapter/Fast Forward 14. Preset 3 Preset 3 RPT Repeat 15.
ページ6に含まれる内容の要旨
Operating with the Remote Control REMOTE CONTROLLER KEY FUNCTION Number Radio TV CDC DVD/CD 1 POWER ON/OFF 2 OPEN/CLOSE 3 MODE 4 MUTE 5 Auto Store/Preset Scan 6 Function 7 ASPECT 8 - Preset 1 Ch No Preset 2 Ch No Preset 3 Ch No Preset 4 Ch No Preset 5 Ch No Preset 6 Ch No Ch No Intro Ch No Random Ch No Disc Up Ch No Disc Down Figure.10 9 Clear 10 Volume Up/Down 11 TILT Up/Down 12 -I Track/Chapter Down 13 - I Track/Chapter Up 14 - Fast Backward 15 - Fast Forward 16 - II Pause/Play 17 STEP 18 DIS
ページ7に含まれる内容の要旨
Basic Operations Resetting *In case the unit does not operate normally, press the [RESET] button with a pointed object to restart the operation when the power of the unit is on. *Pressing the [RESET] button will turn off the power. Press the [MODE/POWER] button to turn power on. *When the screen shows touch key [RADIO] on another mode, change the mode to radio mode and then return to the original mode. Turning On the Power Press the [MODE/POWER] button shortly to switch on the unit, When the
ページ8に含まれる内容の要旨
[OPEN/CLOSE] ! *The monitorcanbe closed onlywhenitispositioned parallel withthe front of unit. Positionmanuallythe monitorparallel withthe frontof unitbyholding leftand rightside of the monitorwithhands and thenpress the [OPEN/CLOSE] buttonto close it. *Whena picture displays onthe monitor, pressingthe [OPEN/CLOSE] button will close the monitor. Butthe sound canstill be heard. If you wantto turnoff the sound, press the [MODE/POWER] buttonmore than2 seconds to
ページ9に含まれる内容の要旨
Radio Operation Press the [MODE/POWER] button repeatedly until radio mode is selected. In case the radio is tuned over 3 hours wih closing the monitor, The unit will be hotter. Please make sure to open the monitor when you want to listen to radio over 2 hours, or else the unit may be damaged. Selecting Radio Reception Area See "Selecting Radio Reception Area" in page 12. Selecting the Radio Band 1. Press the [MODE/POWER] button repeatedly until the radio mode is selected. Both the sub LCD and t
ページ10に含まれる内容の要旨
Basic Operations with Touch Keys This unit has Touch Screen feature. You can select/adjust the functions by touchung touch keys displaying on the monitor. You can touch the screen with finger or the plastic pen supplied with this unit. 1. Press the [OPEN/CLOSE] button to open the monitor and turn on the power. 2. Touch anywhere of the screen softly with a finger to show the menu of touch keys. BASiC MODE 1. [MODE] key 2. Current mode display 3. [EQ/DSP] key 4. [SETUP] key 5. [PICTURE] key 6. [E
ページ11に含まれる内容の要旨
System Settings with Touch Keys Adjusting the Bass Level 1. Touch [EQ/DSP] to show the audio menu. 2. Touch [ ] or [ ] to decrease or increase the bass level. Adjusting the Treble Level 1. Touch [EQ/DSP] to show the menu. 2. Touch [ ] or [ ] to decrease or increase the treble level. Adjusting the Balance Levels 1. Touch [EQ/DSP] to show the menu. 2. Touch [ ] or [ ] to emphasize the sound in the left or the right channel. Adjusting the Fader Levels 1. Touch [EQ/DSP] to show the menu. 2. Touch [
ページ12に含まれる内容の要旨
System Settings with Touch Keys Setting Clock 1. Touch [SETUP] and then Touch [SYSTEM] to show the menu. 2. Touch HOUR [ ] or [ ] to adjust the hour. 3. Touch MIN [ ] or [ ] to adjust the minute. * The screen dispalys 24 hours and sub LCD dispalys 12 hours. * Clock on the sub LCD displays only when the power of the unit is off and ACC on. Adjusting the Volume of Subwoofer 1. Touch [SETUP] and then Touch [VOLUME] to show the menu. 2. Touch Woofer VOL [ ] or [ ] to adjust the subwoofer volume. Ad
ページ13に含まれる内容の要旨
Radio Operation with Touch Keys 1. Touch softly with finger anywhere of the screen to show touch key menu. 2. Touch [MODE] to show the mode menu and then touch [RADIO] to select radio mode. Selecting Radio Reception Area 1. Touch [SETUP] and then Touch [SYSTEM] to show the menu. 2. Touch [RADIO AREA] to select radio area for your country. USA USA, Canada, S.America EUROPE EU, S/E Asia, M/E Asia, Africa KOREA Korea, Taiwan, Philipine CHINA China Selecting the Radio Band Touch [BAND] to select r
ページ14に含まれる内容の要旨
[SETUP] [SYSTEM] [VIDEOSTD] [VIDEOSTD] NTSC -> PAL BG-> PALDK-> PALI->PALAUS-> NTSC NTSC PALBG PALI PALDK PALAUS [MODE] [TV] [BAND] [BAND] TV1->TV2->TV3->TV1 [1-36] [BAND] [AS] [BAND] [1-36]
ページ15に含まれる内容の要旨
DVD/CD Changer Operation with Touch Keys Setting Up a DVD/CD Changer 1. Touch [SETUP] and then Touch [EXT. DEVICE] to show the menu. 2. Touch [CDC] to select DVD or CD changer source. Each time [CDC] is touched, the source is switched as follows. NONE -> MPIRE -> DVDC 12 -> DVDC 10 -> S CDC -> CDC 6 -> NONE 3. Select [6 CDC], [10 DVDC] or [12 DVDC] when it is connected to the AV control box. Select [S CDC] when Sanyo 6 CD changer is connected to the AV control box. Select [NONE] when no DVD or
ページ16に含まれる内容の要旨
Navigation Operation with Touch Keys Setting Up 1. Touch [SETUP] and then Touch [EXT. DEVICE] to show the menu. 2. Touch [NAVI] to select a navigation Input source. Each time [NAVI] is touched, Input source is switches as follows. NONE -> NOVA -> DW -> NONE [NONE]:Select no navigation unit is connected to the unit. [NOVA]or [DW]:Select RGB output of your navigation is connected to [RGB] input of the main unit. * The factory default setting is [NONE]. NONE -> RGB -> AV 1
ページ17に含まれる内容の要旨
[MODE] [DVD] [Setup] SETUP MENU -- MAIN PAGE GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES EXIT SETUP [Setup] (Enter) 16
ページ18に含まれる内容の要旨
General Setup PIC MODE Select according to the disc recording format. If you are not sure of the recording format, it is recommended to select [AUTO]. [AUTO]: Automatically select the image mode according to the disc recording format. [HI-RES]: Play with high resolution for TV format. [NON-FLICKER]: Selected to lower flash playing for movie format. *The factory default setting is [AUTO]. ANGLE MARK Select according to the disc-recording format. You can set up so that the angle mark appears on t
ページ19に含まれる内容の要旨
[LT/RT]: [STEREO]: [OFF]: [STEREO] [ANALOG]: [SPDIF/RAW]: [SPDIF/PCM]: [ANALOG] [SPDIF/RAW] [SPDIF/PCM] [LINEOUT] [RFREMOD] [RF REMOD] [STEREO] [L-MONO] [R-MONO] [MIX-MONO] [STEREO] [OFF]: [ON]: [AUTO]: [ON] [LPCM 48K] [LPCM 96K] [LPCM 96K] 18
ページ20に含まれる内容の要旨
Preferences AUDIO Select a desired audio language. KOREAN, ENGLISH, FRENCH, SPANISH, CHINESE, JAPANESE *The factory default setting is [ENGLISH]. *This option is available only when the language selected is recorded in the disc. SUBTITLE Select a desired subtitle language. KOREAN, ENGLISH, FRENCH, SPANISH, CHINESE, JAPANESE, OFF *This option is available only when the language selected is recorded in the disc. *The factory default setting is [ENGLISH]. DISC MENU Select a desired DVD m
