ページ1に含まれる内容の要旨
10.4" Overhead TFT-LCD Monitor
PLVW1040R
ページ2に含まれる内容の要旨
1. Table of Contents------------------------------------------------------ 1 2. Warning ---------------------------------------------------------------- 1 3. Usage Notice ---------------------------------------------------------- 2 4. Package ---------------------------------------------------------------- 3 5. Remote Control --------------------------------------------------------3 6. User Controls --------------------------------------------------------- 4 7. Start Your Installation ----------
ページ3に含まれる内容の要旨
Usage Notice Follow all warnings, precautions and maintenance as recommended in this user's manual to maximize the life of your LCD monitor To avoid the damage of the LCD monitor and risk of electronic shock, do not permeate the LCD monitor with water or any drink. When this happens, turn off the power, unplug the power cord and send the LCD monitor to your local dealer or our service cen-ter as soon as possible. Use a regular power specification of DC 12V . Do not use any other power
ページ4に含まれる内容の要旨
Package This LCD monitor comes with all the items below. Check to make sure your unit complete. Contact your dealer immediately if anything is missing. PLVW1040R * 10.4" High RES TFT-LCD Monitor * Overhead Console Mounting Bracket * Credit Card Size Remote Control with Batteries * Interface Cable with RCA jacks for Audio / Video Connection and 12V DC * User's Manual Remote Control TV/CATV TV/AV MUTE POWER TV/CATV interchange Power TV/AV MUTE 1 2 3 4 Number Pad 5 6 8 7 FM/AM SETUP 0 9 SETUP
ページ5に含まれる内容の要旨
User Controls User Control Overview * Panel Control Start Your Installation Wiring * Monitor connection 4
ページ6に含まれる内容の要旨
Setting Up The Dome Lamps *Operating the dome Lamps 1. There are three function buttons for the Dome lamps operation: OFF, DOOR, and ON. (Refer to the following figure) A. OFF: To turn off the lamps. B. DOOR: To make the lamps turned on only when car doors are opened. C. ON: To turn on the lamps. ON DOOR OFF * The electric circuit figure OFF W LAMPS DOOR R B BATTERY + ON Point Power Cord Color Conn
ページ7に含まれる内容の要旨
Installation your Monitor Take care to select a suitable fitting location and securing method for the monitor: *The unit should not distract or obstruct the driver. *The installation should not inhibit the entry to, or the exit from the vehicle. *The unit should not interfere with other vehicle components e,g (sliding sunroof). *Make sure the unit is installed to a secure, robust mounting location and cannot become dislodged in the event of an emergency stop. *Do not support the unit using
ページ8に含まれる内容の要旨
Closing Monitor 1. Return the monitor to the central viewing position. (Refer to the following figure) 2. Push the monitor/TV back into the monitor base unit until the screen engages with the release button. Operating the Monitor * Powering up the monitor The monitor will be automatically turned on when releasing the monitor from the base unit and "OFF" when it is closed. Operating Instructions Opening the Monitor 1. Press the monitor release button to lower the LCD screen. 2. Lower the mo
ページ9に含まれる内容の要旨
Press the "+" key to enter the * OSD Menus in A/V Source sub-menu. Press "MENU" button to go back to the main menu. MAIN MENU A. Source Selection Menu CUBS.1 = NTSC H. SYNC = +15.7K Hz SOURCE V. SYNC = -60.0Hz BRIGHTNESS AUTO DETECT CONTRAST S-VIDEO COLOR HUE VIDEO 1 1 SOURCE VIDEO 2 2 AUDIO RECALL RETURN EXIT B. Audio Input Selection Menu AUDIO MUTE VOLUME RECALL RETURN * Quick Adjustment OSD Menus 1. By pressing the "SELECT" button, you may open the following OSD menus directly. Use "+" o
ページ10に含まれる内容の要旨
Function Descriptions Panel Control * Menu: Pop up the OSD menus. Press the "Menu" button again to exit the OSD menus. When in sub-menu, press "MENU" again to go back to the main menu. * Select: 1. Switch among each function items in OSD menus. 2. Make quick adjustment of "brightness" and "contrast". * +/- Keys: 1. Press the "+/-" key to increase or decrease volume. 2. Ma
ページ11に含まれる内容の要旨
Specifications Screen Size 10.4" diagonal Resolution 800 (H) x 600 (V) pixels Number of colors 262, 144 colors Pixel pitch & Format 0.264 (H) x 0.264 (V) mm Vertical Stripe Arrangement Brightness 150 cd/m2 Maximum Contrast Ratio 200 Operating Temperature 0 C ~ 50 C Storage Temperat
ページ12に含まれる内容の要旨
Appendix Changing the New Battery in Remote Control 1. Push the cassette button to wards the right. (As shown # 1 in below figure) 2. Pull the all battery cassette away from the remote control. As shown # 2 in below figure) Change a new battery. 2 Battery Cassette Button 1 11
