ページ1に含まれる内容の要旨
PLL1900W
LED LCD Monitor
USER'S GUIDE
www.planar.com
ページ2に含まれる内容の要旨
Content Operation Instructions...................................................................................................................................................1 Safety Precautions ...........................................................................................................................................................2 First Setup...............................................................................................................................
ページ3に含まれる内容の要旨
Operation Instructions Thank you for purchasing this edge-lit LED LCD monitor, a high-resolution multi-scan color LED LCD monitor.Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This has been tested and found compliant with the limits for a Class B digital LED LCD monitor device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interfere
ページ4に含まれる内容の要旨
Safety Precautions This is manufactured and tested on a ground principle that a user’s safety LED LCD monitor comes first. However, improper use or installation may result danger to the LED LCD monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This LED LCD monitor should be operated only at the correct power sources indicated on the label on the rear end of the LED LCD monitor. If you’re unsure of the
ページ5に含まれる内容の要旨
First Setup Congratulations on your purchase of this high performance edge lit LED LCD monitor. This LED LCD monitor comes with the following accessories : LED LCD monitor Power Cable User’s Guide VGA Cable Installing the Stand Base 1. Place the monitor face down on a soft cloth or cushion on a table. 2. Install the stand base to the monitor. Disconnecting the Stand Base 1. Place the monitor face down on a soft cloth or cushion on a table. 2. Press the 2 tenons inwa
ページ6に含まれる内容の要旨
Front View of the Product OSD Menu On/Off Contrast/Brightness /Scroll Down/Adjust Decrease Preset Mode/Scroll Up/ Adjust Increase Confirm Select/ Auto adjust Power ON/OFF LED Indicator 4
ページ7に含まれる内容の要旨
Rear View of the Product Power input (AC input) VGA input (D-Sub 15 pin) 5
ページ8に含まれる内容の要旨
Quick Installation 1. Connect the VGA video cable from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the power cord to a properly grounded AC outlet, then to the monitor. 3. Power-ON computer and then POWER-ON the monitor. Set the timing mode on your computer. Recommended resolution and refresh rate is 1366 x 768 @ 60 Hz. Example: PC Power cable VGA cable 6
ページ9に含まれる内容の要旨
Basic Operation Before using the LED LCD monitor: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD monitor on/off: Press POWER button on the front of LED LCD monitor. The power LED indicator lights green when the LED LCD monitor is on. Using the OSD Menu You are able to use OSD menus to adjust various settings by using menu button on the front of the LED LCD monitor. Display main menu 1
ページ10に含まれる内容の要旨
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. LED LCD monitor The will show an “Lock Out” message for 5~10 seconds and the message will disappear automatically. Repeat this step to unlock. 8
ページ11に含まれる内容の要旨
Advanced Operation—OSD Menu LED LCD monitor You can use the OSD menu to adjust various settings for your . Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast: To adjust the foreground white level of screen image. ▲: increase contrast, ▼: decrease contrast. Brightne
ページ12に含まれる内容の要旨
5400K: Adds green to screen image for a darker color. User Color: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2. Press ▼ or ▲ button to adjust selected color. Information: To display the information, regarding the current input signal coming from the graphic card in your computer. Note: See your graphic card user guide for more information about changing the resolution and refresh rate. Manual Image Adjust: To manually a
ページ13に含まれる内容の要旨
H. Position: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. Position: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down. OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period of time. OSD Background: Allows the user to turn the OSD background On or Off. Memory Recall: To recall factory settings for Video controls. Press button 2 to select the Memory Recall menu option.
ページ14に含まれる内容の要旨
Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1024 X 768 @72Hz MAC 1152 x 870 @ 75Hz VESA 1152 X 864 @75Hz VESA 1280 x 720 @ 60Hz VESA 1280 x 768 @ 60Hz VESA 1280 x 800 @ 60Hz VESA 1366 x
ページ15に含まれる内容の要旨
Technical Information Technical Specification Panel 18.5” TFT (with LED backlight) Power Management On: 18 Watts (typical), 25 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution WXGA 1366 x 768 max. Vertical Frequency 60Hz max. Pixel Dimension 0.3 x 0.3 mm Display Color 16.7M Tilt 0°~ 20° Active Display Area 409.8 mm x 230.4 mm Temperature Operating: 0°C ~ + 40°C Storage: -20°C ~ + 60°C Compliance FCC, CE, UL/cUL , WEEE ， Power Input Voltage AC100-24
ページ16に含まれる内容の要旨
Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This LED LCD monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED LCD monitor before performing the procedure below. 1. Lay the LED LCD monitor face down on a soft surface. 2. Remove the hinge cover. 3. Remove the one screw holding the stand to the hinge. 4. Remove the stand. 100mm x 100mm Screw Attaching The Opti
ページ17に含まれる内容の要旨
Care and Maintenance Care Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your LED LCD monitor away from the sun to reduce glare. Put your LED LCD monitor in a well ventilated area. Do not place any heavy things on top of your LED LCD monitor. Make certain your LED LCD monitor is installed in a clean and moisture-free area. Keep your LED LCD monitor away from magnets, motors, transformers, speakers, and TV sets. Note Move the LED ou
ページ18に含まれる内容の要旨
2013 P/N:2001171356T
