ページ1に含まれる内容の要旨
PL2410W
LCD Monitor
USER'S GUIDE
www.planar.com
ページ2に含まれる内容の要旨
Content Operation Instructions...................................................................................................................................................1 Safety Precautions...........................................................................................................................................................2 First Setup....................................................................................................................................
ページ3に含まれる内容の要旨
Operation Instructions Thank you for purchasing this TFT LCD Monitor, a high-resolution multi-scan color TFT LCD Monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This has been tested and found compliant with the limits for a Class B digital TFT LCD Monitor device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a
ページ4に含まれる内容の要旨
Safety Precautions This is manufactured and tested on a ground principle that a user’s safety TFT LCD Monitor comes first. However, improper use or installation may result danger to the TFT LCD Monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This TFT LCD Monitor should be operated only at the correct power sources indicated on the label on the rear end of the TFT LCD Monitor. If you’re unsure of the po
ページ5に含まれる内容の要旨
First Setup Congratulations on your purchase of this high performance TFT LCD monitor. This TFT LCD Monitor comes with the following accessories : LCD Monitor User's Guide Power Cable Base VGA Cable (15 pin) Install the stand base TFT LCD Monitor 1. Lay the flat on a table with the LCD screen face down. To prevent the monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. 2. Unpack the base, one hand hold the monitor, the
ページ6に含まれる内容の要旨
Front View of the Product ① ②③④ ⑤⑥ ① OSD Turn On/ Off Contrast/Brightness Setting/Scroll Down/Adjust Decrease ② ③ Preset Mode/ Scroll UP/ Adjust Increase ④ Input select/ Confirm Selection ⑤ Power On/ Off ⑥ LED Indicator 4
ページ7に含まれる内容の要旨
Rear View of the Product ⑦ ⑧ ⑨ ⑦ Power Input ⑧ DVI Input (DVI 24 pin) ⑨ VGA Input (D-Sub 15 pin) 5
ページ8に含まれる内容の要旨
Quick Installation 1. Connect either VGA or DVI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the AC power cord to the AC/DC power adapter, then to the monitor. 3. Power-ON computer and then POWER-ON the monitor. 4. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x1080 @ 60Hz. Example: PC Power cable VGA cable DVI cable 6
ページ9に含まれる内容の要旨
Basic Operation Before using the TFT LCD Monitor: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the TFT LCD Monitor on/off: Press POWER button on the front of TFT LCD Monitor. The power LED indicator lights green when the TFT LCD Monitor is on. Using the OSD Menu You are able to use OSD menus to adjust various settings by using menu button on the front of the TFT LCD Monitor. The basic operation is
ページ10に含まれる内容の要旨
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The TFT LCD Monitor will show an “Lock Out” message for 5~10 seconds and the message will disappear automatically. Repeat this step to unlock. 8
ページ11に含まれる内容の要旨
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your TFT LCD Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast: To adjust the foreground white level of screen image. ▲: increase contrast, ▼: decrease contrast. Brightness:
ページ12に含まれる内容の要旨
User Color: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2. Press ▼ or ▲ button to adjust selected color. Information: To display the information, regarding the current input signal coming from the graphic card in your computer. Note: See your graphic card user guide for more information about changing the resolution and refresh rate. Manual Image Adjust: To manually adjust the Horizontal Size, H. /V. position, Fine Tune,
ページ13に含まれる内容の要旨
OSD Position: Press ▼ or ▲ button to select between horizontal and vertical OSD Position adjustment. H. Position: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. Position: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down. OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period of time. OSD Background: Allows the user to turn the OSD background On or Off. Memory Recall: To re
ページ14に含まれる内容の要旨
Supporting Timing Modes STANDARD RESOLUTION VGA 720 X 400 @ 70Hz VGA 640 X 480 @ 60Hz Mac 640 X 480 @ 67Hz VESA 640 X 480 @ 72Hz VESA 640 X 480 @ 75Hz VESA 800 X 600 @ 56Hz VESA 800 X 600 @ 60Hz VESA 800 X 600 @ 72Hz VESA 800 X 600 @ 75Hz Mac 832 X 624 @ 75Hz VESA 1024 X 768 @ 60Hz VESA 1024 X 768 @ 70Hz VESA 1024 X 768 @ 75Hz VESA 1152 X 864 @ 75Hz Mac 1152 X 870 @ 75Hz VESA 1280 X 1024 @ 60Hz VESA 1280 X 1024 @ 75Hz VESA 1440 X 900 @ 60Hz VESA
ページ15に含まれる内容の要旨
Technical Information LCD Panel 23.6” TFT Power Management On: 40 Watts (typical), 55 Watts (maximum) Standby Mode: <0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.2715 x 0.2715 mm LCD Display Color 16.7M Tilt -2° (+/-2) ~ 20° (+/-2) Active Display Area 521.3 mm x 293.2 mm Temperature Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C Compliance FCC, CE, UL , WEEE Power Input Voltage AC100-240 V 13
ページ16に含まれる内容の要旨
Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This TFT LCD Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the TFT LCD Monitor before performing the procedure below. 1. Lay the TFT LCD Monitor face down on a soft surface. 2. Remove the 4 screws holding the stand to the hinge. 3. Remove the stand. Attaching The Optional Wall Mount Arm (not supplied) 100mm x 100mm
ページ17に含まれる内容の要旨
Care and Maintenance Care Avoid exposing your TFT LCD Monitor directly to sunlight or other heat source. Place your TFT LCD Monitor away from the sun to reduce glare. Put your TFT LCD Monitor in a well ventilated area. Do not place any heavy things on top of your TFT LCD Monitor. Make certain your TFT LCD Monitor is installed in a clean and moisture-free area. Keep your TFT LCD Monitor away from magnets, motors, transformers, speakers, and TV sets. Note Move the LCD out
ページ18に含まれる内容の要旨
Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.html Cables, Replacement Lamps, Accessories To find cables, replacement lamps and accessories for your Planar projector, LCD monitor, touch screen or other Planar products visi
ページ19に含まれる内容の要旨
2001171056P
