ページ1に含まれる内容の要旨
LM-/TM-7115/7115N
LCD Touch Monitor
User’s Manual
Rev. B0
I. FEATURES
• Most stable 15” LCD monitor with tilt adjust for
industrial and commercial use.
• Application covers POS, Factory Automation etc.
• High quality 15” TFT LCD panel with scaling function for full screen
display
• Easy maintenance structure allowing easy cleaning
• Tilt adjustable yet robust and wobble free construction
• Recommended LCD resolution: 1024 x 768
• Resistive type extra long life touch panel in USB interfa
ページ2に含まれる内容の要旨
II. CARTON CONTENTS 1. Touch Monitor (Main unit + Adjustable base stand assembly) 2. User’s Manual 3. VGA cable 4. USB cable 5. Power adaptor: 12 V DC & power cord 6. Posiflex Product Information CDROM 7. Option RS232 cable 8. Option Audio cable III. PARTS IDENTIFICATION A. FRONT VIEW Main Unit Display Screen + Touch Panel Logo + Power Indicator Adjustable Base Option Assembly FA-200 B. SIDE VIEWS Lock/release button to detach the main unit Control button area Push in this
ページ3に含まれる内容の要旨
IV. INPUT / OUTPUT PORTS 12 V DC VGA RJ45 Jack USB (B) USB (A) option (option RS232 for input input (to Host) (to Devices) Audio input TM-7115) V. AVAILABLE OPTION ITEMS 1. Audio port for multimedia application 2. Side mount upgrade kit FA-200 with MSR / Fingerprint sensor 3. Wall mount kit (WB-6000V-B) VI. HARDWARE INSTALLATION A. Option Multi-Media Function When this option is ordered with the LM-/TM-7115/7115N touch monitor, the 3.5 mm diameter stereo jack and 2 internal 2W speake
ページ4に含まれる内容の要旨
C. Cable Connections In order to settle the touch monitor properly in a point of sale system, all the cable connections have to be routed through its base. Therefore, please observe the procedures from A to C below to separate the main unit from the base stand assembly after all cables in connection area disconnected. Step A: Prepare a soft clean flat surface, such C as a piece of cloth on the desk to seat B the front surface of main unit A Step B: Press the Lock/Release button for main
ページ5に含まれる内容の要旨
D. Option Wall Mount Kit Select a flat surface on wall of adequate strength and with proper ventilation and space condition. Please use the right material to hold this monitor according to the wall material (Drywall, concrete, solid wood, etc). Consult with your contractor if it is necessary. Please fix WB-6000V-B at the holes inside the guide holes circled in the picture to the wall or Front Side Back side fix it to a VESA joint at bosses on back WB-6000V-B WB-6000V-B side. VII. DR
ページ6に含まれる内容の要旨
Edge Accel. – This function engages the “Posiflex USB Touch Edge Acceleration Tool” and helps to find the hidden taskbar or thin scroll bar through touch. Enable Touch – This check box must be checked to have the touch panel working. Enable Touch_to_Calibrate – This check box provides a shortcut for touch calibrator by holding touch for a programmed time delay. However, this function denies the touch mode of “Click on Release”. Enable Buzzer – This check box enables the internal
ページ7に含まれる内容の要旨
Compensation – This list button selects the distance to advance the mouse toward edge from touch point. d. USB touch right button tool This tool differs slightly from the “Touch as Right Button Click” check box in the USB touch manager. When executed, there will be a small window of “One Shot Right Button” appearing on desktop. Any touch on the panel right after touching this small window will work like clicking the right button of mouse at that point. However, the next touch will resum
ページ8に含まれる内容の要旨
IX. OSD (ON SCREEN DISPLAY) SCREEN ADJUST FUNCTION A. OSD buttons The 4 OSD control buttons are above the power switch button on left side of the LCD panel. “OSD” button: To enter OSD setup menu, or to perform function selected in OSD operation. “NXT” button: To go to next option function. “” “” button: To increase setting value. “” “” button: To decrease setting value. B. OSD functions Press “OSD” button with a normal display on the screen to activate the OSD functions (On Screen
ページ9に含まれる内容の要旨
button to increase contrast. Press “-” to decrease. Press “OSD” button to save the current setting and return to “Brightness/Contrast submenu”. “EXIT”: Return to “Main menu”. “COLOR ADJUST SUBMENU”: There are 4 icons in this submenu: Press “OSD” button to select item or return to main menu. Press “NXT” button to select among auto color adjust, auto RGB reset, Color balance adjust and exit. “AUTO COLOR ADJUST”: Upon an “OSD” button press on this icon the monitor will perform an automatic
ページ10に含まれる内容の要旨
“7500K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 7500 degrees Kelvin. “9300K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 9300 degrees Kelvin. “EXIT”: Return to “Color adjust submenu”. “EXIT”: Return to “Main menu”. “GEOMETRY ADJUST SUBMENU”: There are 6 icons in this submenu: Press “OSD” button to select item or return to main menu. Press “NXT” button to select among auto geometry adjust, hori
ページ11に含まれる内容の要旨
adjust submenu”. “EXIT”: Return to “Main menu”. “TOOLS SUBMENU”: When this item is selected, there are 5 icons in this submenu: Press “OSD” button to select item or return to main menu. Press “NXT” button to select among OSD submenu, reset to default, phase, smoothness / sharpness adjust, mode select and exit. “OSD SUBMENU”: When this item is selected, there are 4 icons in this submenu: Press “OSD” button to select item or return to main menu. Press “NXT” button to select among OSD time,
ページ12に含まれる内容の要旨
frequency of 37.9KHz and pixel frequency of 31.5MHz making it impossible for automatic select. These modes are not used in normal Windows display. “EXIT”: Return to “Main menu”. “EXIT”: Exit OSD setup with all adjustment saved. X. SUPPORTED DISPLAY MODES For video signals beyond the supported display modes, there will be a message “Out Of Range” on middle of screen. Maximum supported color depth for TM-7115 is 18 bits or 262,144 colors and that for TM-7115N is 24 bits or 16.2 M colors.
