ページ1に含まれる内容の要旨
PXL2230MW
LED Touch Monitor
USER'S GUIDE
www.planar.com
ページ2に含まれる内容の要旨
Content Operation Instructions ...........................................................................................................1 Unpacking Instructions ..........................................................................................................2 Safety Precautions .................................................................................................................2 Front View of the Product................................................................
ページ3に含まれる内容の要旨
Operation Instructions Thank you for purchasing the PXL2230MW multi-touch LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This has been tested and found compliant with the limits for a Class B TFT LED LCD monitor digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. Th
ページ4に含まれる内容の要旨
Unpacking Instructions Move the LED LCD monitor out of the package and take off the plastic bag and Polystyrene Foam. Pull the base from Parallel versus Panel to Vertical. Adjust the Panel between 0° leaning forward and 20° leaning backward. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: Turn off the product before cleaning. Touch screen surface may be cleaned using a soft
ページ5に含まれる内容の要旨
Front View of the Product ① ② ③ ④ ⑤ ⑥ OSD Turn On/ Off ① ② Volume Adjust/ Scroll Down/ Adjust Decrease Preset Mode/ Scroll UP/ Adjust Increase ③ ④ Input select/ Confirm Selection Power On/ Off ⑤ ⑥ LED Indicator 3
ページ6に含まれる内容の要旨
Rear View of the Product ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑦ Power Input USB – Type A to B ⑧ ⑨ Headphone Jack Audio Input ⑩ ⑪ HDMI Input(HDMI 19 pin) DVI Input (DVI 24 pin) ⑫ ⑬ VGA Input (D-Sub 15 pin) 4
ページ7に含まれる内容の要旨
Quick Installation 1. Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the audio cable from audio output of computer to the audio input of the monitor. 3. Connect the USB cable from the computer to the monitor. 4. Connect power cord to a properly grounded AC outlet, and then to the monitor. 5. Power-ON computer and then POWER-ON the monitor Set the timing mode on your computer. Recommended res
ページ8に含まれる内容の要旨
Basic Operation and Calibration/Reset Instructions Before using the TFT Touchscreen LED LCD monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the TFT Touchscreen LED LCD monitor on/off: Press POWER button on the front. The power LED indicator light will be blue when the TFT Touchscreen LED LCD monitor is on. Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the
ページ9に含まれる内容の要旨
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 10 seconds to lock all 5 buttons. The TFT Touchscreen LED LCD monitor will show a “Lock Out” message for 3 seconds and the message will disappear automatically. Repeat this step to unlock. PXL2230MW Calibration/Reset Instructions: The PXL2230MW is available with USB connection. It is Microsoft® Windows® 7 HID (Human Interface Device) compati
ページ10に含まれる内容の要旨
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your TFT Touchscreen LED LCD monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast: To adjust the foreground white level of screen image. ▲: increase contrast, ▼: decrease contra
ページ11に含まれる内容の要旨
Color Adjust: To select the color for improving brightness and color saturation between 9300K, 6500K, 5400K, and User Color. 9300K: Adds blue to screen image for cooler white. 6500K: Adds red to screen image for warmer white and richer red. 5400K: Adds green to screen image for a darker color. User Color: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2. Press ▼ or ▲ button to adjust selected color. Information: To display the
ページ12に含まれる内容の要旨
Setup Menu: To set up Language, OSD Position, OSD Time Out and OSD Background. Language Select: To allow users to choose from available languages. OSD Position: Press ▼ or ▲ button to select between horizontal and vertical OSD Position adjustment. H. Position: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. Position: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down. OSD Time Out: To automatically turn o
ページ13に含まれる内容の要旨
Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1280 x 960 @ 60Hz VESA 1152 x 864 @ 75Hz MAC 1152 x 870 @ 75Hz VESA 1280 x 1024 @ 60Hz VESA 1280 x 1024 @ 75Hz VESA 1440 x 900 @ 60Hz VESA 144
ページ14に含まれる内容の要旨
Technical Information LCD Panel 21.5” TFT (with LED backlight) Power Management On: 25 Watts (typical),30 Watts (maximum) Standby Mode : < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.24825 x 0.24825 mm LCD Display Color 16.7M Tilt 5° (+0/-2) ~ 38° (+/-2) Active Display Area 476.64 mm x 268.11 mm Temperature Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C Compliance FCC, CE, WEEE, UL, cUL Power Input Volt
ページ15に含まれる内容の要旨
Wall-Mount Installation Instructions Wall Mount Arm not included Turn the power OFF then disconnect the cables from the TFT Touchscreen LED LCD monitor before performing the procedure below. 1. Lay the TFT Touchscreen LED LCD monitor face down on a soft surface. 2. Remove the 4 screws holding the stand to the hinge. 3. Remove the stand. 4. Follow instructions included with the Wall Mount Kit. NOTE 100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm 100mm x 100mm Screw Mo
ページ16に含まれる内容の要旨
Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply TFT Touchscreen LED LCD monitor is firmly connected to the . Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Make sure all signal cables are installed. Power on but no screen image TFT Touchscreen LED LCD monitor Make sure the video cable supplied with the is tightly secured to the video output po
ページ17に含まれる内容の要旨
Planar Support Cables, Replacement Lamps, Accessories To find cables, replacement lamps and accessories for your LED LCD monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com or find other stores who carry Planar products at http://www.planar.com/howtobuy Technical Support Visit Planar at http://www.planar.com/support for product registration, operations manuals, touch screen drivers, warranty information and access to Planar's Technical Libra
ページ18に含まれる内容の要旨
2013 020-1024-01A P/N:2001171303T
