ページ1に含まれる内容の要旨
DVD RECEIVER
XV-HTD1
SPEAKER SYSTEM
S-HTD1
Operating Instructions
ページ2に含まれる内容の要旨
CAUTION European and UK models only This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. The following caution label appear on your player. Location: On the rear panel of the player CLASS 1 LASER PRODUCT On the bonnet of the player VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. CAUTION : AVOID EXPOSURE TO BEAM. SICHTBARE UND UNSICHT
ページ3に含まれる内容の要旨
CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE PIONEER PRODUCT. Pioneer is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments. We are sure you will be fully satisfied with the DVD player. Thank you for your support. Thank you for buying this Pioneer product. LINE VOLTAGE SELECTOR SWITCH Please read through these operating instructions so Only multi-voltage model is provided with this you will know how to operate your model pr
ページ4に含まれる内容の要旨
1 Before You Start Features What’s in the box Confirm that the following accessories are in the box • Superlative audio performance with when you open it. Dolby Digital* and DTS** software • Remote control The XV–HTD1 delivers breathtaking sound quality with • AA/R6P dry cell batteries x2 Dolby Digital and DTS discs. • AM loop antenna • Graphical Setup Navigator • FM antenna Setting up your home theater is easy using the • Video cord (yellow) graphical Setup Navigator. Answer the questions that
ページ5に含まれる内容の要旨
Before You Start 1 Contents 6 Using Surround Sound 11 DVD Setup Menu 1 Before You Start Adjusting the bass and treble 23 Using the DVD Setup menu 38 Features 4 Using P.Bass 23 Video settings 38 What’s in the box 4 Using sound modes 23 TV Screen 38 Using this manual 4 Listening to surround-sound Picture Quality 38 Putting the batteries in sources 23 S-Video Out 39 the remote control 6 Listening to other sources with Still Picture 39 Using the remote control 6 room effects 24 On Screen Display 39
ページ6に含まれる内容の要旨
1 Before You Start Chapter 12 provides additional information, including a • When disposing of used batteries, please comply with glossary of terms used in this manual, and a trouble- governmental regulations or environmental public shooting section. institution’s rules that apply in your country or area. Using the remote control Putting the batteries in the remote Keep in mind the following when using the remote control control: 1 Open the battery compartment cover on • Make sure that there are
ページ7に含まれる内容の要旨
Before You Start 1 ✗ Use near a television or monitor as you may experience interference—especially if the television uses an indoor antenna. ✗ Use in a kitchen or other room where the system Audio CD compatibility: may be exposed to smoke or steam. • 12cm or 8cm (5” or 3”) discs ✗ Use on a thick rug or carpet, or cover with cloth— • Linear PCM digital audio this may prevent proper cooling of the unit. • CD-Audio, CD-R* and CD-RW* formats ✗ Place on an unstable surface, or one that is not large
ページ8に含まれる内容の要旨
2 Connecting Up Before making or changing any rear panel connections, make sure that all the components are switched off and unplugged from the power supply. Center Connecting the speakers Subwoofer FRONT REAR L L L FRONT REAR L L R R R R R AC INLET SUB- CENTER WOOFER SPEAKERS COAX R L DIGIT INAL TV/ ANTENNA VCR IN H AM VIDEO OUT LOOP ANTENNA IN 1 AUX FM S-VIDEO OUT OUT 75 UNBAL Ω SUB- CENTER WOOFER SPEAKERS Front R Front L H 1 H Rear R Rear L The speaker terminal tabs and supplied speaker cable
ページ9に含まれる内容の要旨
Connecting Up 2 The front and center speakers supplied with this system Do not connect any of the supplied speakers to any are magnetically shielded. However, placing them other amplifier. This may result in malfunction or fire. extremely close to a television may result in color This DVD receiver has been designed for best perfor- distortion on the screen. If this happens, move the mance when connected to the supplied speakers. We do speakers a little further away and switch off the not, theref
ページ10に含まれる内容の要旨
2 Connecting Up Connecting to your TV FRONT REAR L L COAX R DIGITAL R R IN TV/ AC INLET VCR VOLTAGE SUB- IN SELECTOR WOOFER CENTER SPEAKERS 240V H COAX DIGITAL R L 220- IN TV/ 230V VCR IN 110- H VIDEO 127V AM VIDEO LOOP Supplied video cord OUT OUT IN ANTENNA IN AUX 1 S-VIDEO FM OUT OUT UNBAL 75Ω AUX 1 S-VIDEO OUT OUT H VIDEO IN S-VIDEO IN S-Video cord (not supplied) 1 Use the supplied yellow video cord to Setting the TV System connect the VIDEO OUT jack to a video The default setting of this pla
ページ11に含まれる内容の要旨
Connecting Up 2 AM loop antenna Connecting the supplied antennas 1 Pull off the protective shields of both AM European model antenna wires. FM wire 2 Press the antenna terminal tabs to open antenna and insert one wire into each terminal. AM loop antenna 3 Release the tabs to secure the AM an- FRONT REAR ANTENNA tenna wires. L L L R R R AC INLET H VOLTAGE SELECTOR SUB- WOOFER SPEAKERS CENTER AM 240V DIGITAL COAX RL LOOP 220- IN TV/ ANTENNA 230V VCR IN ANTENNA 110- H 127V 4 Bend the stand in the d
ページ12に含まれる内容の要旨
2 Connecting Up Connecting external antennas External AM antenna Use 5–6 meters of vinyl-insulated wire and set up either indoors or outdoors. Leave the supplied AM loop antenna connected. External FM antenna Except European model : Use 75Ω coaxial cable to hook up an external FM antenna. Do not leave the supplied FM wire antenna attached. European model : Use 75Ω coaxial cable with a PAL connector to hook up an external FM antenna. European model Outdoor AM antenna Indoor AM antenna H AM LOOP A
ページ13に含まれる内容の要旨
Connecting Up 2 Connecting other components FRONT REAR OAX L L L RL R R R TV/ AC INLET VCR VOLTAGE IN SELECTOR SUB- H WOOFER SPEAKERS CENTER 240V DIGITAL COAX RL 220- IN TV/ VCR 230V IN H 110- 127V VIDEO AM OUT LOOP ANTENNA IN IN 1 AUX FM S-VIDEO 75 UNBAL Ω AUX OUT OUT 1 H OUT H Tape deck, VCR, MD recorder, etc. OUT (PLAY) Analog IN (REC) 1 Use a stereo audio cable to connect the Connecting the power AUX IN jacks to the analog outputs of an Before connecting the power and switching on for the ex
ページ14に含まれる内容の要旨
3 Controls & Displays 15 ENTER Remote control 16 Cursor right Use for navigating menus and on-screen displays. 17 MENU Page 20 TOP MENU Page 20 DVD TUNER TV STANDBY /CD /BAND /AUX /ON 1234 18 Cursor down Use for navigating menus and on-screen TEST TONE SURROUND MUTE CH LEVEL MODE DSP displays. 5678 19 SOUND Page 24, 25 VOLUME —+ 9 10 DVD SETUP SYSTEM SETUP 207 Page 19 5 12 11 1 3 213/8 Page 19 ENTER 2 3 14 15 16 TOP MENU 22 RETURN Page 20 MENU SOUND ∞ 17 18 1 9 234 / –PREV Pages 19-20 RETURN
ページ15に含まれる内容の要旨
Controls & Displays 3 This illustration is not European model. Front panel 1 2 3 4 5 6 7 DISC SKIP EXCHANGE 0 OPEN/CLOSE 123 4 5 VIDEO VOLUME DVD RECEIVER XV-HTD1 STANDBY/ON STANDBY CD ADVANCED DSP DISC12 3 4 5 MODE THEATER Karaoke 1 . . DVD/CD TUNER/BAND TV/AUX CD MODE 7 3/8 41 ¡¢ MIC LEVEL MIC PHONES 20 19 18 17 16 15 14 13 12 11 10 9 8 1 STANDBY indicator 9 Mic input (Except European model) CD MODE indicator 10 Mic volume (Except European model) ADVANCED THEATER indicator 11 DISC indicators D
ページ16に含まれる内容の要旨
4 Setting Up Switching on and setting the clock Setting up for surround sound This system has a built-in clock, which needs to be set You can use this system right out of the box for to be able to use the timer features. surround sound with just the default settings. However, for really great surround sound, we recommend that you spend a few minutes making some settings that match this system to your listening room. Unless you STANDBY /ON change the layout of your speakers or main listening posi
ページ17に含まれる内容の要旨
Setting Up 4 4 Press 3 to move on to the CENTER speaker setting. It may not be possible to accurately adjust the subwoofer level using this method. You may prefer to 5 Use the 5 and ∞ buttons to set the leave it on its default setting and adjust it to your liking distance from your main listening posi- later when playing surround-sound sources. tion to the center speaker. The default setting is 3m. You can adjust the range • You cannot change the DSP mode when Record from 0.3m to 9.0m in steps
ページ18に含まれる内容の要旨
4 Setting Up 3 Select START. Using the Setup Navigator • If you decide not to use the Setup Navigator, select Before playing any discs, we strongly recommend using Auto Start Off here instead. the Setup Navigator. This makes all the basic DVD system settings for you. 4 Choose an OSD menu language. Video Language General Setup Navigator Language English OSD Language français Español Select the On Screen Language Move ENTER Select SETUP Exit DVD SETUP 5 ENTER 2 3 ∞ 7 • The language options shown i
ページ19に含まれる内容の要旨
Getting Started 5 • Do not place discs in the two partially accessible disc Playing DVDs, CDs and Video CDs spaces, as it’s easy to misalign them. Use only the front- The basic controls for playing discs are covered here. most space. Further functions are detailed in the chapter 7. • When using the DISC SKIP button, wait until the disc tray has come to a complete stop before loading a disc; the player may malfunction if a disc is caught in DVD STANDBY /CD /ON DSP the disc tray mechanism. —+ VOLU
ページ20に含まれる内容の要旨
5 Getting Started Numbers If the disc is stopped, playback starts from Navigating DVD disc menus the selected track or title number. If the Some DVD discs contain menus. Sometimes these are disc is playing, playback jumps to the start displayed automatically when you start playback; others of the selected track or chapter number. only appear when you press menu or top menu. >10 Selects tracks/titles/chapters 11 and over. (For example, for 24, press >10 , 2, 4.) Button What it does TOP MENU Displ
