ページ1に含まれる内容の要旨
LA1950RTR / LA1950RTC
LA1950RTS / LA1950R
Touch Screen LCD Monitor
USER’S GUIDE
www.planartouch.com
ページ2に含まれる内容の要旨
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. Nopart of this document may be reproduced,translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission. Windows is a registered trademark of Microsoft, Inc. Other brand or product names
ページ3に含まれる内容の要旨
Table of Contents Usage Notice Precautions............................................................................................................................. 1 Introduction About LA1950 Series.............................................................................................................. 2 Touch Screen for LA1950RTR ................................................................................................ 2 Touch Screen for LA1950RTC ...........................
ページ4に含まれる内容の要旨
Usage Notice ! Warning - To prevent the risk of fi re or shock hazards, do not expose this product to rain or moisture. ! Warning - Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: • Turn off the product before cleaning. •
ページ5に含まれる内容の要旨
Introduction About LA1950 Series The LA1950 Series is a 19" fl at panel screen with an active matrix, thin-fi lm transistor (TFT) liquid crystal display (LCD). Features include: • Direct Analog signal input • Active matrix TFT LCD technology • 1280x1024 SXGA resolution • 19” viewable display area • 31.47 ~ 80 kHz horizontal scan • 56 ~ 75 Hz high refresh rate • 0.294mm x 0.294mm Pixel pitch • Auto adjustment function • Multilingual OSD user controls • 75 mm/100 mm VESA mount • Bracket
ページ6に含まれる内容の要旨
Touch Screen for LA1950RTS • Surface Acoustic Wave (SAW) touch screen for fi nger and stylus input • Surface: Anti-glare treatment • Interface: Dual RS-232 Serial/USB controller • Transmittance: 92±5% ® • Driver: Windows 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux, ® Apple Mac OS Non-Touch Screen for LA1950R • Pure Glass • Surface: Anti-glare treatment • Interface: N/A • Transmittance: 91.5±5% • Driver: N/A 3
ページ7に含まれる内容の要旨
Package Overview LCD Display VGA Signal Cable Power Cord DC Power Supply RS-232 Cable USB Cable ( A to B ) (LA1950RTR/RTC/RTS only) (LA1950RTR/RTC/RTS only) Quick Start Guide Bracket Screw 4
ページ8に含まれる内容の要旨
Product Overview • Front View • LA1950RTR / LA1950RTC / LA1950RTS Bottom View VGA USB DC IN RJ-11 RS-232 • LA1950R Bottom View VGA DC IN RJ-11 5
ページ9に含まれる内容の要旨
Attaching the L-Brackets Depending on your mounting scheme, alternately, you may use the L-brackets to mount your displays onto your wall or device. Find a suitable location for attaching L-brackets. A. The left and right sides B. The Top and bottom sides Bracket Bracket or Bracket Bracket Note: You will need a screwdriver to attach the L-brackets. Your kiosk touch monitor included two L-brackets (and four screws, M4x6). This equipment is i
ページ10に含まれる内容の要旨
Side Mount For Your Monitor This monitor can be mounted to the wooden or concrete wall with 4 screws and a pair brackets on the opposites. 142 71 342.9 140 140 26 7 5 5.75 18
ページ11に含まれる内容の要旨
Customer panel material: 1. Wooden wall: Ø4.5mm thru holes for M4 screws w/nuts, or no thru holes, screws for wood 4mm. 2. Sheet metal: concealed head threaded studs M4 w/nuts. LA1950R/RTR/RTC/RTS RECOMMENDED CUSTOMER PANEL CUT-OUT 448.9 280 140 +1 385.5 -0 8 0 4-R4.6 -1 +1 310.5 -0 140 280 376.3
ページ12に含まれる内容の要旨
IMPORTANT! The wall mounting instructions are for the qualifi ed wall mounting person only! ! Warning! Please select the proper screws! The distance between the back cover surface and the bottom of the screw hole is 8 mm. Please use four M4 screws diameter with proper length to mount your monitor. Please note: the mounting stand must be able to support at least 13.2 lbs (6Kg). Connecting the Display (Figure 10.1) To setup this display, please refer to the following fi gure and procedures.
ページ13に含まれる内容の要旨
(Figure 10.1) LA1950RTR / LA1950RTC / LA1950RTS LA1950R 10
ページ14に含まれる内容の要旨
User Controls Back Panel Controls Power Enter Down Up Menu OSD Menu off status Menu on status Key Menu appear Menu disappear/return to main item Brightness Main item select up/Adjust up Contrast Main item select down/Adjust down Enter/Select sub-item function Power On/Off 11
ページ15に含まれる内容の要旨
How to Use the OSD Menus Icon key Name Menu Up Down Enter Power 1. Press the “MENU” button to pop up the “on-screen menu” and press “Up” or “Down” button to select among the fi ve functions in the main menus. 2. Choose the adjustment items by pressing the “Enter ” button. 3. Adjust the value of the adjustment items by pressing the “Up” or “Down” button. 4. With the OSD menu on screen, press “ Menu” button to return main menu or exit OSD. 5. The OSD menu will automatically close, if you have
ページ16に含まれる内容の要旨
On-Screen Display Menus Main OSD Menu: ITEM CONTENT Contrast The monitor luminance level control. Brightness The monitor backlight level control. Auto Adjust Fine-tune the image to full screen automatically. Left/Right Moving screen image horizontal position to left or right. Up/Down Moving screen image vertical position to up or down. Horizontal size The screen image horizontal dot clock adjustment. Fine The screen image pixel phase adjustment. OSD Left/Right Moving OSD menu horizontal position
ページ17に含まれる内容の要旨
Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. ► Check that all the I/O and power connectors are correctly and well connected described in the "Installation" section. ► Make sure the pins of the connectors are not crooked or broken. Problem: Partial Image
ページ18に含まれる内容の要旨
Warning Signal If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card. There may be three sources for this problem. Please check the cable connections or contact your local dealer or our service center for more information. No Signal This message means that the LCD display has been powered on but it cannot receive any signal from the computer graphics card. Check all the power switches, power cables, and
ページ19に含まれる内容の要旨
Product Dimensions 432.90 429.60 1.00 63.40 384.50 Side View Front View 100.00 75.00 Back View 16 309.50 75.00 357.00 100.00 132.50 360.30
ページ20に含まれる内容の要旨
Compatibility Modes Mode Resolution H-Frequency(khz) V-Frequency(hz) IBM VGA 720X400 31.47 70 IBM VGA 640X480 31.47 60 Apple MacII 640X480 35.00 66 VESA VGA 640X480 37.86 72 VESA VGA 640X480 37.50 75 VESA VGA 800X600 35.16 56 VESA VGA 800X600 37.88 60 VESA VGA 800X600 48.08 72 VESA VGA 800X600 46.88 75 Apple Mac 832X624 49.72 75 VESA XGA 1024X768 48.36 60 VESA XGA 1024X768 56.48 70 VESA XGA 1024X768 60.02 75 VESA SXGA 1280X1024 64.00 60 VESA SXGA 1280X1024 80.00 75 1152X864 67.50 75 VESA SXGA 12
