ページ1に含まれる内容の要旨
( )
MZ360229EX LZH-80WM4
OVERHEAD CONSOLE WITH 8” LCD SCREEN
INSTRUCTION MANUAL
© B64-3764-00/00 (WW)
ページ2に含まれる内容の要旨
Safety precautions Notes • The illustrations of the display and the panel 2 WARNING appearing in this manual are examples used to To prevent injury or fire, take the explain more clearly how the controls are used. Therefore, what appears on the display in the following precautions: illustrations may differ from what appears on • To prevent a short circuit, never put or leave any the display on the actual equipment, and some metallic objects (such as coins or metal tools) of the illustrat
ページ3に含まれる内容の要旨
Components names and Functions Open the monitor 1 2 3 4 Monitor release knob 1 Monitor release knob 1 Unlock the motor Unlock the motor. Press the monitor release knob. 2 Dome light switch 2 Open the monitor "ON": The light goes on. Press the monitor dawnward. "DOOR": The light does on/out with the opening/closing of vehicle doors. ⁄ "OFF": The light goes out. • Do not press the LCD of the monitor when opening the monitor. The LCD can damage. 3 IR transmitter • When closing the monitor, press
ページ4に含まれる内容の要旨
Operations POWER INPUT SCRN DIM INPUT DIM/ /MENU POWER SCRN/ Power Display information When you press the [INPUT] button, the status of Turns power ON or OFF the monitor is displayed. Press the [POWER] button. 3 AV-IN2 Video Source Selection 1 Press the [INPUT] button. Full Mode Each time the button is pressed, the video source switches as follows: 2 Display Setting I R 2 MHz "AV-IN1" Select the AV1 INPUT source. "AV-IN2" Select the AV2 INPUT source. 1 Screen mode Display 2 IR headphones
ページ5に含まれる内容の要旨
Picture Quality setting ⁄ • The "TIN" can be adjusted when NTSC video signal is You can adjust the picture quality control of the input. monitor. • The screen select can be set for each source. • If you make no operation for 15 seconds, this mode 1 Enter Picture Quality setting mode is automatically canceled. Press the [MENU] button for at least 2 seconds. 2 Select the screen for brightness ("BRT") setting Selection of Screen Brightness Press the [SCRN] or [DIM] button for at least Setti
ページ6に含まれる内容の要旨
Operations Switching Screen mode IR Headphones frequency setting Press the [SCRN] button. You can select the IR Headphones frequency you Each time the button is pressed, the screen wish. mode switches as follows: Press the [SCRN] button for at least 2 seconds. Each time the button is pressed for at least Display Setting "Full" Full picture mode. 2 seconds, the frequency output switches as follows: Display Setting "2 MHz" The output frequency of IR Headphones is "Just" Justify picture mode.
ページ7に含まれる内容の要旨
Specifications Specifications subject to change without notice. Monitor Unit General Screen size Operating voltage : 8 inches wide : 14.4 V DC (11 - 16 V) Display system Current consumption : Transparent TN LCD panel : 1500 mA Drive system Consumed Power : TFT active matrix system : 2.2 W Number of pixels Operational temperature range : 336,960 pixels (480 H × 234 V × RGB) : –10 °C to +60 °C Effective pixels Storage temperature range : 99.99 % : –30 °C to +85 °C Pixel arrangement Dimensions (W
ページ8に含まれる内容の要旨
