ページ1に含まれる内容の要旨
DDX8032BT
DDX8032BTM
MONITOR WITH DVD RECEIVER
INSTALLATION MANUAL
© B54-4652-00/00 (MW/M2W/XW)
ページ2に含まれる内容の要旨
Accessories 1 0 ..........1 ..........1 2 ! ..........1 ..........1 3 ..........1 4 ..........1 5 ..........2 6 ..........1 7 ..........1 8 ..........6 9 ..........6 | 2 DDX8032BT/DDX8032BTM
ページ3に含まれる内容の要旨
Installation Procedure • Connect the speaker wires correctly to the terminals to 1. To prevent a short circuit, remove the key from the which they correspond. The unit may be damaged or fail to ignition and disconnect the - battery. work if you share the - wires or ground them to any metal 2. Make the proper input and output wire part in the car. connections for each unit. • When only two speakers are being connected to the 3. Connect the speaker wires of the wiring harness. system, conne
ページ4に含まれる内容の要旨
Connection If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may Ignition key cause a short circuit, that in turn may start a fire. Always switch connect those wires to the power source running through the fuse box. ACC A Ignition wire (Red) B A Car fuse box Battery wire (Yellow) Car fuse box B (Main fuse) FM/AM Antenna Cord Ground wire (Black) - antenna input (To car chassis) C C Battery Connect to the vehicle's parking brake detectio
ページ5に含まれる内容の要旨
Bluetooth Microphone (Accessory !) (see page 8) Cooling fan FUSE ( 15A ) Accessory 1 REVERSE REMO.CONT White/Black To front left speaker + White Gray/Black ILLUMI To front right speaker + Gray Green/Black MUTE To rear left speaker + Green Purple/Black To rear right speaker + ANT. CONT Purple P CONT EXT.CONT | English 5
ページ6に含まれる内容の要旨
System Connection USB terminal (iPod) USB device (commercially available) USB terminal USB device (commercially available) iPod ■ Visual input (iPod) Resistance-free mini plug ■ Audio input (iPod) Resistance-free stereo type mini plug Accessory Accessory Accessory 4 2 3 ■ Audio/Visual Output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red) ■ Audio/Visual input1 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Audio/Visual inp
ページ7に含まれる内容の要旨
Optional Accessory Connection iPod (commercially available) KCA-iP300V (Optional Accessory) Audio Output (Black) Navigation System Input Visual Output (Yellow) USB terminal USB terminal (iPod) iPod cannot be connected. USB terminal TV Tuner (Optional Accessory) Navigation System (Optional Accessory) Connection cable (Included in the TV tuner) Connection cable (Included in the Navigation System) | English 7 iPod TO MONITOR UNIT TV ANTENNA INPU
ページ8に含まれる内容の要旨
Installing the Microphone Unit Installing the Escutcheon 1. Check the installation position of the microphone For General Motors (accessory !). 1. Cut out accessory 6 to meet the shape of the 2. Remove oil and other dirt from the installation opening of the center console. surface. 2. Attach accessory 6 to the unit. 3. Install the microphone. 4. Wire the microphone cable up to the hands-free Cut out to meet the shape of box with it secured at several positions using tape the opening in th
ページ9に含まれる内容の要旨
For Toyota/Scion 1. Cut out accessory 6 as illustrated. Cutting line Accessory 6 2. Fold double-sided adhesive (accessory 7) along the slit and attach it to accessory 6 cut-out against the center rib as illustrated. Use 2 pieces of accessory 7 for 1 accessory 6 cut- out. 3. Attach accessory 6 cut-out to the unit. Accessory 7 | English 9
ページ10に含まれる内容の要旨
Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw Metal mounting strap (commercially available) (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installation on Toyota, Nissan or Mitsubishi Car using Brackets Accessory 8 (M5x
ページ11に含まれる内容の要旨
Removing Monitor/Player Unit Removing the Hard Rubber Frame Removing the Unit (escutcheon) 1. Remove the hard rubber frame by referring to the removal procedure in the section . remove the two locks on the lower level. 2. Remove the Hex-head screw with integral washer Lower the frame and pull it forward as shown in (M4 × 8) on the back panel. the figure. 3. Insert the two removal tools 5 deeply into the Acce
ページ12に含まれる内容の要旨
1 0 2 ! 3 4 5 6 7 8 9 | 12 DDX8032BT/DDX8032BTM
ページ13に含まれる内容の要旨
- - 2 ¤ - + - | 13
ページ14に含まれる内容の要旨
A B A B - C C PRK SW | 14 DDX8032BT/DDX8032BTM
ページ15に含まれる内容の要旨
! 1 REVERSE REMO.CONT + ILLUMI + MUTE + + ANT. CONT P CONT EXT.CONT | 15
ページ16に含まれる内容の要旨
iPod 2 3 4 | 16 DDX8032BT/DDX8032BTM RELAY 2 SUB REAR VIEW FRONT AV IN2 AV IN1 AV OUT REAR CENTER RELAY 1 WOOFER CAMERA
ページ17に含まれる内容の要旨
| 17 iPod TO MONITOR UNIT TV ANTENNA INPUT
ページ18に含まれる内容の要旨
! 6 6 ! 6 0 0 | 18 DDX8032BT/DDX8032BTM
ページ19に含まれる内容の要旨
6 6 7 6 6 7 6 7 | 19
ページ20に含まれる内容の要旨
8 9 8 9 | 20 DDX8032BT/DDX8032BTM
