ページ1に含まれる内容の要旨
MONITOR WITH DVD RECEIVER
DDX5022
DDX5022Y
DDX52RY
INSTALLATION MANUAL
© B54-4621-00/00 (EW/E2W/E3W)
ページ2に含まれる内容の要旨
Accessories 1 ..........1 2 ..........2 3 ..........1 | 2 DDX5022/DDX5022Y/DDX52RY
ページ3に含まれる内容の要旨
Installation Procedure 1. To prevent short circuits, remove the key from the € ignition and disconnect the - terminal of the • Mounting and wiring this product requires skills and battery. experience. For safety’s sake, leave the mounting and wiring 2. Make the proper input and output wire work to professionals. connections for each unit. • Make sure to ground the unit to a negative 12V DC power 3. Connect the wire on the wiring harness. supply. 4. Take Connector B on the wiring harness an
ページ4に含まれる内容の要旨
Connection Connector A Ground wire (Black) Battery wire (Yellow) 8 6 4 2 7 5 3 1 Ignition wire (Red) 8 6 4 2 7 5 3 1 Connector B Antenna Cord (Orange/White) Dimmer control wire (Orange/White) ILLUMI Connect to the vehicle's parking brake detection switch harness. Parking sensor wire (Light Green) PRK SW For the sake of safety, be sure to connect the parking sensor. Reveres sensor wire (Purple/White) Connect to vehicle's reverse lamp harness when using the optional rear view camera. Steering
ページ5に含まれる内容の要旨
Cooling fan FM/AM antenna input (JASO) Wiring harness FUSE ( 15A ) (Accessory 1) REVERSE REMO.CONT MUTE ANT. CONT P CONT | English 5
ページ6に含まれる内容の要旨
Connecting Wires to Terminals Connector Function Guide 2WARNING Pin Numbers for Cable Colour Functions Connecting the ISO Connector ISO Connectors The pin arrangement for the ISO connectors depends on External Power the type of vehicle you drive. Make sure to make the proper Connector connections to prevent damage to the unit. A-4 Yellow Battery The default connection for the wiring harness is described in A-5 Blue/White Power Control 1 below. If the ISO connector pins are set as described i
ページ7に含まれる内容の要旨
System Connection USB device USB terminal (commercially available) Do not connect. ■ Audio Input Resistance-free stereo type mini plug ■ Visual Input Resistance-free mini plug ■ Rear View Camera Input • Visual input (Yellow) ■ Audio/Visual Output • Visual output (Yellow) ■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout/ Subwoofer Preout • Audio left output (White) • Audio right output (Red) ■ Audio/Visual Output • Audio left output (White) • Audio
ページ8に含まれる内容の要旨
Optional Accessory Connection iPod (commercially available) KCA-iP300V (Optional Accessory) Audio Output (Black) Visual Output (Yellow) Visual Input (Yellow) USB terminal USB terminal Navigation System (Optional Accessory) Audio Input (Black) KCA-BT200 input (Optional Accessory) TV Tuner (Optional Accessory) Connection cable (Included in the Navigation System) Connection cable (Included in the TV tuner) | 8 DDX5022/DDX5022Y/DDX52RY TO MONI
ページ9に含まれる内容の要旨
Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw Metal mounting strap (commercially available) (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installing the Escutcheon Accessory 3 | English 9
ページ10に含まれる内容の要旨
Removing Monitor/Player Unit Removing the Hard Rubber Frame Removing the Unit (escutcheon) 1. Remove the hard rubber frame by referring to the removal procedure in the section . remove the two locks on the lower level. 2. Remove the Hex-head screw with integral washer Lower the frame and pull it forward as shown in (M4 × 8) on the back panel. the figure. 3. Insert the two removal tools 2 deeply into the Remo
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
