ページ1に含まれる内容の要旨
XDVD700
INSTALLATION/OWNER’S MANUAL
DVD Multimedia Receiver with 7” Touch Screen Display
TOUCH
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to
prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking
brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
ページ2に含まれる内容の要旨
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Manufactu
ページ3に含まれる内容の要旨
XDVD700 PREPARATION Table of Contents Page DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Remote Control Overview . . . . . . . . .
ページ4に含まれる内容の要旨
XDVD700 PREPARATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage. Several states prohibit the installation of monitors/DVD players if the screen is visible f
ページ5に含まれる内容の要旨
XDVD700 OPERATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVD700 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 1VDC negative ground only. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-da
ページ6に含まれる内容の要旨
XDVD700 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Slide the unit out of the mounting sleeve. • Install mounting sleeve into opening, bending tabs to secure. • Connect
ページ7に含まれる内容の要旨
XDVD700 INSTALLATION Expanded Wiring Diagram - Inputs/Outputs Wiring Notes: Subwoofer output The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. NEED HELP?? Call our Technical Service Hotline, 1-866-38-5476. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in
ページ8に含まれる内容の要旨
XDVD700 INSTALLATION Wiring Diagram - Optional A/V Connections 7
ページ9に含まれる内容の要旨
XDVD700 OPERATION IR Remote Preparation To first use the IR Remote control, Notes: you must first pull the battery • Remove the battery if the remote will insulation tape out not be used for a month or longer • Remove and dispose of battery properly Insert or replacing the Battery: Remove the battery holder Remove the battery from the battery holder Install the new battery Make sure to keep the (+) side up Insert the battery holder CAUTION!!! • Do not store battery with metallic objects
ページ10に含まれる内容の要旨
XDVD700 OPERATION Control Locations - Monitor Closed 4 5 1 2 3 6 16 15 14 13 12 11 10 9 8 7 Band Play/Pause/Scan 1 9 Auto Store/Preset Scan Stop 2 10 Secondary LCD Chapter/Track Up 3 11 4 Display 12 Chapter/Track Down 5 Open/Close Monitor 13 Fast Forward 6 Eject 14 Fast Reverse 7 Rotary Encoder/Enter 15 Mute 8 Mode 16 Power/Volume Monitor Notes: • This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not obstruct the dash, shifter or any other
ページ11に含まれる内容の要旨
XDVD700 OPERATION Control Functions - Monitor Closed BAND Press BAND to increment from FM1, FM, FM3, AM ] FM1. The FM band indicator is shown as "1", "" or "3" and is located on the far left side of the secondary LCD. The AM band indicator is shown as "A". AS/PS Press AS/PS momentarily to start station PRESET SCAN function, (Auto Store /Preset Scan) Press AS/PS for seconds to start AUTO STORE station preset function in current BAND. SECONDARY LCD Additional LCD for system information
ページ12に含まれる内容の要旨
XDVD700 OPERATION Control Locations - Monitor Open 1 2 3 4 5 1 Disc-in indicator - Red = Disc inserted, White = No disc. ANGLE - Press to decrease the monitor view angle. 2 3 ANGLE - Press to increase the monitor view angle. 4 INFO - Press to display DVD INFO. Press and hold to access the Picture Menu and adjust the CONTRAST and BRIGHTNESS. 5 Press to RESET system. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature
ページ13に含まれる内容の要旨
XDVD700 OPERATION Control Functions - Monitor Open Disc-in indicator White = No disc Red = Disc inserted Monitor Angle Press ANGLE to increase the monitor view angle. Press ANGLE to decrease the monitor view angle. Notes: • Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only. • The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location. • T
ページ14に含まれる内容の要旨
XDVD700 OPERATION Control Locations - Remote 3 1 2 4 5 6 7 8 11 9 10 12 15 13 16 14 19 20 17 18 22 23 24 21 26 27 28 25 32 29 30 31 35 36 33 34 40 39 37 38 Info Root Mode 1 16 31 Search Repeat Mute 2 17 32 Key #0 Chapter/Track/Seek Down Open/Close 3 18 33 Band/Stop Chapter/Track/Seek Up Power 4 19 34 Audio Select Fast Reverse/Manual Tune Down Key #1 5 20 35 Escape Fast Reverse/Manual Tune Up Key # 6 21 36 4-Way - Up Zoom Key #3 7 22 37 Menu Audio Volume Up 8 23 38 Picture Angle Key #4 9 24 39 4
ページ15に含まれる内容の要旨
XDVD700 OPERATION Control Functions - Remote Mode Press once to incrementally select desired source. Mute Press once to MUTE audio, press again to return audio. Open/Close Press once to open monitor, press again to close the monitor. Power Press once to turn the unit on, press again to turn unit off. Keys 0-9 Direct access chapter/track/preset station for current BAND. Volume Up Increase VOLUME. Volume Down Decrease VOLUME. Info Displays DVD information. Search Search function in the DVD/CD disc
ページ16に含まれる内容の要旨
XDVD700 OPERATION General Operation Press POWER momentarily to turn the unit on, the unit will beep. Power On/Off Press and hold POWER for more than seconds to turn the unit off. Note: EJECT will still function even if POWER is off. Press OPEN to open or close the monitor. The unit will emit a confirmation beep Monitor Open/Close upon opening or closing. Be careful not to not touch or obstruct the monitor movement during the open/close sequence. Notes: • The unit will stop automatically
ページ17に含まれる内容の要旨
XDVD700 OPERATION General Operation Mode Press MODE to select between TUNER, DVD and AUX IN inputs. Modes of operation are indicated in the OSD (On Screen Display) and secondary LCD. Optional Mode Selection With the monitor open, press the top left corner of the screen to display the OSD menu. Press TUNER, DVD or AUX IN icon to select the desired source. Volume Adjust VOLUME using rotary encoder or the VOL buttons. Programmable Turn-on Volume Turn VOLUME rotary to desired listening level,
ページ18に含まれる内容の要旨
XDVD700 OPERATION General Operation Press INFO button for 1 second to display DVD disc information. INFO/PIC Press and hold INFO for seconds to access the Picture Menu and adjust the BRIGHTNESS/CONTRAST CONTRAST and TFT LCD BRIGHTNESS. Press ANGLE to increase, ANGLE to decrease or use VOLUME rotary to adjust the levels up or down. Press BAND to increment from FM1, FM, FM3, AM ] FM1. BAND Press AS/PS momentarily to start station PRESET SCAN function. The unit will AS/PS now scan your p
ページ19に含まれる内容の要旨
XDVD700 OPERATION General Operation Main Menu Access There are three methods to access the MAIN menu: • Press the ENTER button on the right ROTARY knob. • Press the MENU button on the remote control. • Touch the upper left corner of the touch screen. 1 3 4 L 6 5 Touch Access Buttons 1) Touch to access AM/FM TUNER mode. 2) Touch to access CD/DVD mode, (CD/DVD must be inserted). 3) Touch to access AUX INPUT mode. 4) Touch to go BACK to previous screen. 5) Touch to STANDBY screen, touch screen ag
ページ20に含まれる内容の要旨
XDVD700 OPERATION General Setup Menu General Setup Menu • Upon entering Setup Menu, the General tab is the default display. • Select desired parameter to change. • Page will return back to previous screen after 10 seconds of inactivity or by pressing the BACK button. Note: Default anti-theft password is 0000. General Setup Menu Matrix Settings Default Options Function USA S-Amer1 Radio USA Set to appropriate setting for your country S-Amer Europe Video Out Disable Disable Disables video out
