ページ1に含まれる内容の要旨
In Car Video
IVMS-5601
IVMS-7001
Operating and installation instructions
http://www.blaupunkt.com
ページ2に含まれる内容の要旨
DEVICE OVERVIEW 5.6" and 7" 1 9 VIDEO SRC OSD ON 7 5 3 8 6 4 2 10 11 1 5.6"/ 7" TFT LCD screen for 7 Headphone socket headrests 8 Video input (internal) 2 On/off switch 9 Connecting cable 3 Key for screen menu display : Interface cable (OSD menu) ; AV signal converter unit 4 Up menu 5 Down menu 6 AV channel setting (AV1 - AV2 - AV3 - AV4 - AV5) 12
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Notes / Accessories .............. 14 Fitting ..................................... 14 Prepare the working area .............. 14 Mark out the dimensions................ 15 Carefully cut open the headrest cover ............................................. 15 Open the headrest and remove filling and other items ..................... 15 Lay the cable through the headrest ........................................ 16 Insert the mounting frame in the headrest .......................
ページ4に含まれる内容の要旨
NOTES / ACCESSORIES FITTING/REMOVAL Important notes Fitting This device is not intended for fitting in Note the forward section of the passenger It is recommended that the fitting is car- compartment where it could also be ried out at a specialist workshop. seen by the driver. Fitting this device in Prepare the working area any part of the vehicle where it could interfere with or distract the driver’s at- ➮ Remove the headrest, and place it tention is dangerous and is not permit- on a working su
ページ5に含まれる内容の要旨
FITTING/REMOVAL Mark out the dimensions ➮ Feel the covering of the headrest carefully to ensure that there are no invisible parts that would pre- vent the monitor from being fitted. Use the cardboard template provided to mark out the area that will need to be cut. Open the headrest and remove filling and other items ➮ Carefully lift the covering material away from the cut area. ➮ Adjust the cutting depth of the knife to about 2.5 cm, and cut into the headrest following a line about 0.5 cm inside
ページ6に含まれる内容の要旨
FITTING/REMOVAL ➮ Insert the monitor to check that it Insert the mounting frame in the will fit into the cut area, and make headrest adjustments if necessary. ➮ Before connecting the monitor, pass the connecting cables through the holes provided in the mounting plate, as shown in the il- lustration. ➮ Insert the mounting plate into the area that has been cut out, and fix it in place with appropriate fasten- ings. Lay the cable through the headrest ➮ Now pass the supplied cables through the openi
ページ7に含まれる内容の要旨
FITTING/REMOVAL Check and adjust the monitor Removal then apply the Velcro strips ➮ To remove the screen, insert the extraction tool between the screen ➮ Connect the monitor, place it tem- porarily in the cut-out, and place and the mounting plate. the headrest into position. ➮ Insert the extraction tool at the place where a slot has been pro- ➮ Check the various monitor settings such as brightness, headphone vided between the screen and the mounting plate. function, volume control and so on. ➮ T
ページ8に含まれる内容の要旨
FUNCTION OSD functions Sub-menu ➮ To reach the following menu op- Main menu tions, select “MISC” from the main ➮ Call up the main menu by pressing menu. the “MODE” key on the main de- ➮ When in the sub-menu, select the vice, or “MENU” on the remote “MAIN MENU” option to return to control unit. the main menu, then select “EXIT” ➮ Select the “EXIT” option to leave to leave the OSD menu. the OSD menu again. AUTO PROGRAM VOLUME BRIGHTNESS FM CHAN: OFF CONTRAST AV OUT: LINE COLOR ZOOM: FULL TINT SPEA
ページ9に含まれる内容の要旨
FUNCTION TECHNICAL DATA ● ZOOM : Technical data This mode is pre-set by default to “full”. System: NTSC/PAL dual You can make the various adjustments system for the display mode that you want by pressing the or keys for the fol- Power supply / consumption: lowing options: 112 V DC Full = display a 4:3 signal in a 16:9 im- ± 10%, <700 mA age format Standby: < 1 mA ZOOM1 = picture height, zoom factor = 4/3 Video input level: Combined video WIDTH1 = picture height and different signal 0.7 - pictu
ページ10に含まれる内容の要旨
TECHNICAL DATA GUARANTEE Resolution (pixels): Guarantee 5.6": 720 (H) x 234 (W) = The scope of the guarantee depends 168,480 pixels on the regulations in force within the 7": 1440 (H) x 234 (W) country in which the unit was purchased. = 336,960 pixels If your unit develops a fault, please con- tact your dealer and present the pur- Black light: cold cathode tube chase receipt. If the statutory guarantee period in your Visible screen area: country is less than 12 months, Blau- 155.52 (W) x punkt w
ページ11に含まれる内容の要旨
Service-Nummern / Service numbers / Numéros du service après- vente / Numeri del servizio di assistenza / Servicenummers / Telefonnummer för service / Números de servicio / Números de serviço / Servicenumre Country: Phone: Fax: WWW: Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com Austria (A) 01-610 390 01-610 393 91 Belgium (B) 02-525 5454 02-525 5263 Denmark (DK) 44 898 360 44-898 644 Finland (FIN) 09-435 991 09-435 99236 France (F) 01-4010 7007 01-4010 7320 Great Britain (GB) 0
