ページ1に含まれる内容の要旨
Wireless 4.5” LCD Display System
Model: ACA450
Installation/User Manual
Features:
• 4.5" TFT Color LCD Display
• On Screen Display Function
• 2.4 GHz Wireless Receiver
• Automatically Displays Image when Vehicle is in Reverse
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Warnings 2 Product Description 3 Packing List 3 Installation Instructions 4 Controls and Indicators 6 Specifications 7 Maintenance 8 Troubleshooting 8 1
ページ3に含まれる内容の要旨
Warnings The product is intended to assist in safe driving and to allow the driver to have a broader rearview while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to your local traffic regulations. Do not use any features of this system to the extent it distracts you from safe driving. Your first priority while driving should always be the safe operation of your vehicle. Audiovox
ページ4に含まれる内容の要旨
Product Description This Wireless Backup Camera/Monitor Package is designed to assist the driver by providing a clear and wide image of the area behind the vehicle whenever the vehicle is shifted into reverse. Never rely solely on this product to ensure the area is clear of children and/or obstructions. Use your monitor and look both ways. This product is not intended to replace existing safety procedures, but rather to add an additional safety tool for your vehicle. CAUTION: Do not
ページ5に含まれる内容の要旨
Installation Instructions 4-Bolt Amps Style Mount T-slot for Mounting Figure 2 (Mounting the Monitor) NOTE: Amps Style Mount is an industry standard 4-bolt pattern for assorted style mounts available at many retailers. Use caution when installing bolts, as bolts that are too long will damage the monitor. (1) Installing the Visor Clip (mounting bracket) a) Slide the Visor Clip all the way onto the T-slot on the back of the monitor, as shown in figure
ページ6に含まれる内容の要旨
(3) Electrical Connections: The monitor can be powered two ways: 1. Plug the cigarette lighter adapter into the vehicle’s cigarette lighter socket, and then insert the 2.5mm plug into the power supply jack on the monitor. 2. Permanently wire the leads to the vehicle. Choose a source that only has power when the vehicle ignition is on. a. Red wire: ignition source +12 volt. Using the tap connectors supplied, perform the following steps: i. Place the un-stripped ignition source wire o
ページ7に含まれる内容の要旨
Controls and Indicators D A E B C Figure 2 Back Side of Monitor Figure 2 illustrates the controls and indicators on the back side of the ACA450 Monitor: A: Menu Key-shows on screen displays B: “+” Volume Adjustment Key C: “-” Volume Adjustment Key D: Four Position/Channel Receiver Frequency Switch NOTE: Position switch should be in the #1 position. Monitor can receive 4 different frequencies, as noted in specifications, and can receive 4 separate camera sign
ページ8に含まれる内容の要旨
Specifications General Power Supply DC12V Power Consumption <6W Current Draw <400 mA Operating Temperature Range 0 to 50 Display System Screen 4.5” TFT Color LCD Brightness 400 cd/ Contrast Ratio 150:1 Backlight Life 10000 hours Resolution 960×234 Video Format NTSC/PAL Display Format 16 : 9 Wireless Reception System Operating Frequency 2.4GHz Selectable Channel Quantity 4 Channel CH1: 2414 MHz,
ページ9に含まれる内容の要旨
Though your monitor requires little care, you will still need to maintain its condition and performance by following the guidelines below. • Keep your system away from excessive moisture, extreme heat or cold. • Keep liquids away from the display. • Occasionally clean the surface of the monitor with a soft cloth moistened with water or glass cleaner. Troubleshooting Symptoms Solutions 1. Check the monitor wiring and The Monitor is not on after connections the vehicle is sta
ページ10に含まれる内容の要旨
9
ページ11に含まれる内容の要旨
© 2007 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 10
