ページ1に含まれる内容の要旨
R
EN
TMX-R705
FR
Mobile Overhead Monitor
• OWNER'S MANUAL
Please read before using this equipment.
ES
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ELECTRONICS FRANCE S.A.R.L.
Tokyo office: 1-1-8 Nishi Gotanda, 6-8 Fiveways Boulevarde Keysborough,
(RCS PONTOISE B 338 101 280)
Shinagawa-ku, Victoria 3173, Australia 98, Rue De La Belle Etoile, Z.I. Pa
ページ2に含まれる内容の要旨
ENGLISH Contents Information Operating Instructions In Case of Difficulty ........................................12 Specifications ...................................................12 WARNING WARNING .................................................. 2 Installation and Connections CAUTION ................................................... 3 PRECAUTIONS ......................................... 3 Warning ............................................................13 Caution ...................
ページ3に含まれる内容の要旨
WARNING DO NOT BLOCK VENTS OR RADIATOR PANELS. WARNING Doing so may cause heat to build up inside and may result in fire. This symbol means important instructions. Failure to heed them can result in serious DO NOT WATCH VIDEO WHILE DRIVING. injury or death. Watching the video may distract the driver from looking ahead of the vehicle and cause an accident. DO NOT OPERATE ANY FUNCTION THAT TAKES INSTALL THE PRODUCT CORRECTLY SO THAT THE YOUR ATTENTION AWAY FROM SAFELY DRIVING DRIVER CANNOT WATCH T
ページ4に含まれる内容の要旨
CAUTION PRECAUTIONS This symbol means important instructions. Temperature Failure to heed them can result in injury or Be sure the temperature inside the vehicle is between material property damage. +45°C (+113°F) and 0°C (+32°F) before turning your unit on. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to Fuse Replacement the product. Return it to your authorized Alpine dealer or When replacing the fuse(s), the replacement must be of the nearest
ページ5に含まれる内容の要旨
Basic Operations Parts Names of the Overhead Monitor Remote Sensor Monitor Display OPEN/CLOSE Button Dome Light Monitor Display Panel Wireless Headphone Transmitter Headphone Outputs Two output jacks (mini-phono plug) are provided for wired headphones. Output level is adjusted using the Volume UP/DN buttons on the remote control. NOTE Plugging a headphone into either jack will mute the Variable Audio Output. RESET Switch Immediately after installing or applying power to the unit, it should
ページ6に含まれる内容の要旨
An SPST (Single-Pole, Single-Throw) switch (sold separately) can be added to simplify this procedure. Then, you can simply place it in the OFF position when you leave the vehicle. Turn the SPST switch back ON before using the TMX-R705. For connecting the SPST switch, refer to the Installation. • After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal. • Under cold temperature conditions, the screen may lose con
ページ7に含まれる内容の要旨
Basic Operations Adjusting the Volume 1 Press the or button to adjust the volume. NOTE The volume changes continuously if the or button is held down. This operation will affect the headphone and External Audio outputs only. The IR signal for the wireless headphones are not affected. Audio Mute Function Activating this function will instantly lower the volume level by 20 dB. 1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20 Adjusting the Monitor View
ページ8に含まれる内容の要旨
Switching Display Modes 1 Press the DISPLAY button or press and hold the SETUP button for at least 2 seconds. Each press changes the display modes as follows: MODE 1 MODE 2 MODE 3 MODE 4 (WIDE) (ZOOM) (CINEMA) (NORMAL) MODE 4 (NORMAL) A normal television broadcasting (4:3) image is displayed in the center (normal image). MODE 1 (WIDE) FR Stretches the normal image evenly in a horizontal direction so that it is displayed on the entire screen. ES MODE 2 (ZOOM) Stretches the normal image evenly in
ページ9に含まれる内容の要旨
Other Useful Features Adjusting Tint of Picture 1 Press the SETUP button. 2 Press the 9 or 8 button within 10 seconds and select TINT. 9 3 Press the or 9 button within 10 seconds to adjust the tint. SET UP AUX1 PAGE 1 BRIGHT 0 COLOR 0 TINT 0 RG 4 Press the SETUP button to finish adjustments. Adjusting Brightness of Picture 1 Press the SETUP button. Setting the Brightness of the 2 Press the 9 or 8 button within 10 seconds and Backlight select BRIGHT. 9
ページ10に含まれる内容の要旨
Adjusting the Lowest Level of the Setting Automatic Closing of Backlight Monitor The minimum brightness level for the Simply turn the ignition key to OFF to backlighting (LOW) is adjustable. This is used to automatically close the monitor display. match the screen brightness to the dashboard (especially at night). This setting is recalled 1 Press the SETUP button. whenever the vehicle’s headlight switch is turned on in the AUTO Dimmer mode. 2 Press the 9 or 8 button within 10 seconds to select
ページ11に含まれる内容の要旨
Other Useful Features Dome Light Settings 1 Press the DOME LIGHT button to turn the Dome Light ON or OFF regardless of whether the vehicle's doors are open or closed. Door Closed: The dome light will remain lit until the vehicle's door is opened and closed. The dome light will return to Auto mode. To switch OFF the dome light manually, press the DOME LIGHT button again. Door Open: The dome light will remain OFF until the vehicle's door is closed and re-opened. The dome light will return to Auto
ページ12に含まれる内容の要旨
Battery Replacement Replacing the Dome Light Bulb Applicable battery: Use two “AAA” sized dry NOTE When replacing the dome light bulb, replace with one batteries or equivalent. of the specified 12V, 5W capacity. Use of a different capacity bulb may cause damage to the unit. Please • Point the remote control transmitter toward the note that no guarantee is carried out if this is the remote sensor on the TMX-R705 and use the case. remote control within 2 meters from the TMX- R705. 1 Use 12V, 5W ra
ページ13に含まれる内容の要旨
Information In Case of Difficulty Specifications If you encounter a problem, please review the items in MONITOR SECTION the following checklist. This guide will help you isolate Screen Size 7.0" the problem if the unit is at fault. Otherwise, make sure LCD Type Transparent type TN LCD the rest of your system is properly connected or consult Operation System TFT active matrix your authorized Alpine dealer. Number of Picture Elements 336,960 pcs. (1,440 x 234) Effective Number of Picture Elements
ページ14に含まれる内容の要旨
Installation and Connections Before installing or connecting the unit, please DO NOT INSTALL THE MONITOR NEAR THE read the following and pages 2 and 3 of this PASSENGER SEAT AIR BAG. manual thoroughly for proper use. If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may Warning cause the monitor to spring upwards causing an accident and injuries. MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or p
ページ15に含まれる内容の要旨
Installation and Connections Precautions IMPORTANT Please record the serial number of your unit in • Be sure to disconnect the cable from the (–) battery the space provided below and keep it as a post before installing your TMX-R705. This will permanent record. The serial number plate is reduce any chance of damage to the unit in case of a located on the bottom of the unit. short-circuit. • Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the uni
ページ16に含まれる内容の要旨
4 After opening the monitor display and Mounting Instruction adjusting the viewing angle, move the battery line off before installing the unit. This Motorized Overhead Monitor requires a 12V DC power supply for the Monitor Display to open 5 Use 4 screws and attach to the mounting and close. plate. Please DO NOT OPEN and CLOSE BY HAND and (Screw holes are hidden under the panel. handle it with care. Therefore, the panel has to be opened.) (Two rear side screw holes are located under Please follow
ページ17に含まれる内容の要旨
Installation and Connections Connections To other Common Ground (Black) monitor Left Positive (Blue) Connect to the cable Right Positive (Green) of the vehicle side (Rear View) Dome Light-Always OFF (Gray/Green)1 1 w GND (Black) 2 5 p 9 Dome Light-Always ON (Red/Green) 2 3 Dome Light-Door (Blue/Green) Dome Light 3 Remote Turn-on (Blue/White) Rocker switch is Accessory/Ignition (Red) 4 located on Alpine q Dome Light Battery (Yellow/Green) overhead console GND (Black) 6 w Ext. A/V Select (Pink
ページ18に含まれる内容の要旨
Dome Override (Always OFF) (Gray/Green) BATT (Main Unit) (Yellow) 1 7 Connecting to Pin #1 of the external dome light This is a constant + 12V for the main unit. It is SW. When it is grounded, the Dome light remains recommended that separate connections from off all the time. the Dome light battery line are used to avoid noise and over-current. Dome Override (Always ON) (Red/Green) 2 Connect to Pin #3 of the external dome light SW. Fuse Holder (5A) 8 When it is grounded, the Dome light remains o
ページ19に含まれる内容の要旨
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below. 2 You should provide a detailed description of the l PRODUCTS COVERED: problem(s) for which service is required. This Warranty covers Car Audio/Visual Products and 3 You must s
ページ20に含まれる内容の要旨
