KRC-865_U.S 01.10.26 5:35 PM Page 2 Contents Safety precautions......................3 Selecting the Tape type Text Scroll DPSS (Direct Program Search System) About Cassette tape...................4 Basic Operations of remote......21 DPSS with the Remote Loading and Replacing the battery General features .........................5 Blank Skip Basic operations Power Music Repeat In Tuner source Selecting the Source External disc control features..14 In Cassette tape source Volume Playing Exter
ページ3に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 3 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer/CD player to To prevent injury or fire, take the To prevent damage to the machine, be connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative switch to this unit, set the "O-N" switch to "N". locked in place. Otherwise it may fall
ページ4に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 4 Safety precautions About Cassette tape Cleaning the Faceplate Terminals Cleaning the tape head NOTE If the terminals on the unit or faceplate get When there’s noise or the sound quality is bad • If you experience problems during dirty, wipe them with a dry, soft cloth. during tape play the tape head maybe dirty, installation, consult your Kenwood dealer. clean the tape head. • If the unit fails to operate properly, press the Cleaning the Unit Reset button.
ページ5に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 5 General features Power SRC/ Turning ON the Power PWR OFF AM FM ANG Q/AUD u Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. AUTO AME Selecting the Source Press the [SRC] button. Source required Display d 4/¢ ATT/ DISP/ CLK Tuner "TUNER" LOUD NAME.S Tape "TAPE" External disc "DISC" Auxiliary input "AUX" Standby (Illumination only mode) "ALL OFF" SYSTEM Q indicator ATT indicator For Auxiliary input one of the below o
ページ6に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 6 General features User memory "User" Attenuator • User memory: The values set on the
ページ7に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 7 • According to the Bass Q Factor setting value, the frequencies that Switching Display can be set in Bass Center Frequency change as shown below. Switching the information displayed. Bass Q Factor Bass Center Frequency 1.00/1.25/1.50 60/70/80/100 Press the [DISP] button. 2.00 60/70/80/150 Each time the button is pressed the display switches as shown • When the Bass Extend is set to ON, low frequency response is below. extended by 20%. In Tuner source • Volu
ページ8に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 8 General features Example: If "DANCE" is entered. Switching Clock Display Character Button #Times pressed Switching the displayed information. "D" [#3] 1 Press the [CLK] button. "A" [#2] 1 Each time the button is pressed it switches between clock "N" [#6] 2 display and current source. "C" [#2] 3 During clock display the clock indicator is ON. "E" [#3] 2 6 Repeat steps 3 through 5 and enter the name. Station/Disc Naming (SNPS/DNPS) 7 Exit name set mode Press
ページ9に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 9 3 Select the Auxiliary input display Press the [4] or [¢] button. Each time the button is pressed it switches through the below displays. • "AUX" • "TV" • "VCP" • When the faceplate is kept remove open, according to the (page 19) setting, the faceplate is hidden and • "PORTABLE" the power turns OFF. • The faceplate is a precision piece of equipment and can be 4 Exit Auxiliary input display setting mode damaged by shocks or j
ページ10に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 10 General features Tuner features Hiding the Control Panel Prevents tampering with the unit while your car is being serviced AM FM SRC etc. Hiding the control panel Press the [SRC] button for at least 1 second. The faceplate slides open. When the time set in (page 19) lapses, AUTO AME the faceplate is hidden and the power turns OFF. Showing the control panel Press the left part at the upper side of the faceplate. The faceplate will o
ページ11に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 11 Press the [FM] or [AM] button. Tuning Mode 2 Enter Direct Access Tuning mode Choose the tuning mode. Press the [DIRECT] button on the remote. Press the [AUTO] button. The "– – – –" display. Each time the button is pressed the Tuning mode switches as 3 Enter the frequency shown below. Press the number buttons on the remote. Tuning mode Display Operation Example: Auto seek "Auto1" Automatic search for a station. Desired frequency Press button Preset station
ページ12に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 12 Tuner features Cassette player features Auto Memory Entry Putting stations with good reception in the memory AM PROG FM 0 automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry AUTO Press the [AME] button for at least 2 seconds. AME When 6 stations that can be received are put in the memory Auto Memory Entry closes. 4/¢ B NR B.S REP MTL SRC Preset Tuning Calling up the stations in the memory. 1 Select
ページ13に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 13 Playing Cassette Tapes Dolby B NR Press the [B NR] button. When there's no Cassette Tape inserted Each time the button is pressed the Dolby B NR turns ON or 1 Slide open the faceplate OFF. Press the [0] button. When it's ON, "B-NR ON" is displayed. 2 Insert a Cassette Tape. When the faceplate has been slid open, it might interfere with the Selecting the Tape type shift lever or something else. If this happens, pay attention to safety and move the shift lev
ページ14に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 14 Cassette player features External disc control features DPSS with the Remote Designating the song to be skipped with the remote control AM number buttons. 38 FM SRC 1 Designate the song to skip Press number buttons on the remote. 2 Skipping to a later song Press the [¢] button. AUTO AME Skipping to a previous song Press the [4] button. Canceling DPSS 4/¢ Press the [38] button. SCAN RDM REP M.RDM DISP • During the songs first 5 seconds there may be a times
ページ15に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 15 Playing External Disc Album Search (Function of disc changer) Playing discs set in the optional accessory disc player connected Selecting the disc you want to hear. to this unit. Press the [AM] or [FM] button. Press the [SRC] button. Select the display for the disc player you want. Display examples: Direct Track Search (Function of remote) Display Disc player Doing Track Search by entering the track number. "CD" CD player "DISC" CD changer / MD changer 1 E
ページ16に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 16 External disc control features Track/Album Repeat Magazine Random Play (Function of disc changer) Replaying the track/disc you're listening to. Play the songs on all the discs in the disc changer in random Press the [REP] button. order. Each time the button is pressed the Repeat Play switches as shown below. Press the [M.RDM] button. Repeat play Display Each time the button is pressed the Magazine Random Play turns ON or OFF. Track Repeat "T-Repeat ON"/ "
ページ17に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 17 Menu system Menu System Setting during operation beep sound etc. functions. 38 AM FM SRC The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. AUTO AME "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the 4/¢ # 1-4 ME
ページ18に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 18 Menu system If you enter a Code different from your Security Code, you have to Security Code start over from step 4. Because authorization by the Security Code is required when it's Press the Reset button and when it's removed from the removed from the vehicle, personalizing this unit is by using the battery power source Security Code is a help in preventing theft. 1 Turn the power ON. When the Security Code function is activated it can't be released. 2 Do
ページ19に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 19 2 Enter Clock Adjust mode Contrast Adjustment Press the [4] or [¢] button for at least 1 second. Adjusting the display contrast. The clock display blinks. Display and Setting 3 Adjust the hours "Contrast 0" Press the [FM] or [AM] button. Adjust the minutes "Contrast 5" (Original setting) Press the [4] or [¢] button. 4 Exit Clock adjustment mode "Contrast 10" Press the [MENU] button. Dimmer Selectable Illumination Dimming this unit's display automatically w
ページ20に含まれる内容の要旨
KRC-865_U.S 01.10.26 5:35 PM Page 20 Menu system System Q Text Scroll Setting display/don't display for the System Q factors (Bass Setting the displayed text scroll. center frequency, Bass Q factor, Bass extend, Middle center Display Setting frequency, Middle Q factor, and Treble center frequency) in "Scroll Auto" Repeats scroll. Audio control. "Scroll MANU" Scrolls when the display changes. Display Setting The text scrolled is shown below. "System Q ON" The Sy
