ページ1に含まれる内容の要旨
Instructions Instructions CD CD RECEIVER RECEIVER KD KD-A725/KD A725/KD-R720 R720
ENGLISH
ESPAÑOL
FRANÇAIS
KD-A725/KD-R720
CD RECEIVER / RECEPTOR CON CD /
Having TROUBLE with operation?
RÉCEPTEUR CD
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
We can help you!
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to
connect specifically to iPod, or iPhone, respectiv
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
ページ3に含まれる内容の要旨
How to attach/detach the control CONTENTS panel 3 How to attach/detach the control panel 3 How to reset your unit 3 How to forcibly eject a disc 4 Canceling the display demonstration 4 Setting the clock How to reset your unit 5 Preparing the remote controller Your preset adjustments will 5 About discs also be erased. 6 Basic operations 7 Listening to the radio 8 Listening to a disc How to forcibly eject a disc 10 Listening to a USB device 11 Using Bluetooth ® devices [Hold] Available onl
ページ4に含まれる内容の要旨
Canceling the display demonstration 1 Turn on the power. 4 Select . 2 5 [Hold] (Initial setting) 3 6 Finish the procedure. (Initial setting) Setting the clock 1 Turn on the power. 2 [Hold] (Initial setting) 3 Select . 4 Select . 5 Adjust the hour. (Initial setting) 6 Adjust the minute. 7 Finish the procedure. 4 ENGLISH EN02-29_KD-R720[J]_f.indd 4 EN02-29_KD-R720[J]_f.indd 4 1/12/11 2:36:36 PM 1/12/11 2:36:36 PM
ページ5に含まれる内容の要旨
Preparing the remote controller When you use the remote controller for the first Caution: time, pull out the insulation sheet. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Battery shall not be exposed to excessive heat Insulation sheet such as sunshine, fire, or the like. For USA-California Only: This product contains a CR Coin Cell Lithium Warning (to prevent accidents and Battery which contains Perchlorate Material— damage): s
ページ6に含まれる内容の要旨
Basic operations Loading slot Control dial Display window Ejects the disc Remote sensor AUX (auxiliary) input jack • DO NOT expose to bright sunlight. Detaches the panel USB (Universal Serial Bus) input terminal When you press or hold the following button(s)... Remote Main unit General operation controller • Turns on. — • Turns off [Hold]. / SOURCE Selects the available sources (if the power is turned on). SOURCE • If the source is ready, playback also starts. VOL – / + Adjusts the volume le
ページ7に含まれる内容の要旨
Listening to the radio • [Press] Searches for stations automatically. ~ Ÿ • [Hold] Searches for stations manually. “M” flashes, then press the button ] “FM” or “AM” repeatedly. “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Improving the FM reception Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 1 [Hold] stations for AM. 1 2 ] Tune in to a station you want to preset. ] ] ] Reception improves, but stereo
ページ8に含まれる内容の要旨
Title assignment You can assign titles up to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title. • If you try to assign titles to more than 30 station frequencies, “NAME FULL” appears. Delete unwanted titles before assignment. • When HD Radio tuner box is connected (page 20), this feature will be disabled. Repeat step 3 until you have finished 1 4 entering the title. ] “FM” or “AM” 5 2 [Hold] [Hold] To erase the entire title, press and hold DISP ] Shows the title
ページ9に含まれる内容の要旨
Using the remote controller Selecting the playback modes 5 / ∞ : Selects folder of the MP3/WMA. You can use only one of the following playback 2 / 3 : [Press] Selects track. modes at a time. [Hold] Fast-forwards or reverses the 1 track. [Hold] Selecting a track/folder from the 2 list ] “REPEAT” j “RANDOM” 3 • If the MP3/WMA disc contains many tracks, you can fast search (±10, ±100, ±1 000) REPEAT through the disc by turning the control dial TRACK RPT : Repeats current track quickly. FOL
ページ10に含まれる内容の要旨
Listening to a USB device This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit). You can use these two terminals at the same time. You can operate the USB device in the same way you operate the files on a disc. (page 8, 9) • This unit can play MP3/ WMA/ WAV files stored in a USB mass storage class device (such as a USB memory, Digital Audio Player, etc.). ~ Ÿ USB input terminal ] Turns on the power. USB cable (not supplied) USB cable
ページ11に含まれる内容の要旨
Using Bluetooth ® devices Available only when a USB Bluetooth Adapter (separately purchased) is connected. By connecting a USB Bluetooth Adapter and a microphone unit (with an separately purchased accessory kit, KS-BTA50) to this unit, you can use a Bluetooth device with this unit. Once the USB Bluetooth Adapter is attached, this unit is always available for pairing. • Only one USB Bluetooth Adapter can be detected at a time. This unit supports the following Bluetooth profiles • HFP (Hands-Free
ページ12に含まれる内容の要旨
To delete a registered device If “PAIRING” = “PIN 0000” scrolls on 1 Press and hold MENU. the display... 2 Turn the control dial to select ] Enter a PIN (Personal Identification , then press to confirm. Number) code to the Bluetooth device. 3 Turn the control dial to select • You can change the PIN code of your choice , then press to confirm. before pairing. (page 16) [ Initial: 0000 ] 4 Turn the control dial to select a device (B) If “BT PAIRING” flashes, then you
ページ13に含まれる内容の要旨
If DIAL NUMBER is selected in step 2 ... • AUTO ANSWER Enter the phone number to dial. ON : The unit answers the incoming calls Turn the control dial to select a number automatically. / OFF [Initial] : The unit does not or character (see table below), press answer the calls automatically. Press FUNC. or 4 /¢ to move to the entry the control dial to answer. position. Once you finished entering the • RING TONE number, press the control dial to confirm. IN UNIT [Initial] : The unit rings
ページ14に含まれる内容の要旨
To select a contact from the phonebook When is activated.... The unit answers the incoming calls 1 Select PHONEBOOK calling method. automatically. (page 12) • Press FUNC. or the control dial to answer 2 Press 5/∞ to show the search menu the incoming call when is (A to Z, 0 to 9, and OTHERS). deactivated. “OTHERS” appears if the 1st character is not A to Z, or 0 to 9, such as #, —, !, and etc. During a phone call conversation... 3 Press 5/∞ to select your desire
ページ15に含まれる内容の要旨
Using a Bluetooth audio player Operations and display indications differ Selecting the playback modes depending on their availability on the • For Bluetooth devices that support AVRCP 1.3. connected device. 1 ] Select “BT FRONT” or [Hold] “BT REAR.” If playback does not start automatically, operate 2 the Bluetooth audio player to start playback. ] “REPEAT” j “RANDOM” Basic operations 3 Starts or resumes playback. REPEAT TRACK : Repeats current track Mutes the sound. ALL : Repeats all tracks
ページ16に含まれる内容の要旨
Menu item Selectable setting, [ Initial: Underlined ] 1 CONNECT PH * / Turn the control dial to select a device you want to connect. “CONNECTED” = “[Device Name]” CONNECT AU scrolls on the display when the device is connected. DISCONNT PH/ Turn the control dial to select a device you want to disconnect. “DISCONNECT” = DISCONNT AU “[Device Name]” scrolls on the display when the device is disconnected. DELETE PAIR Turn the control dial to select the device you want to delete, then press the cont
ページ17に含まれる内容の要旨
Listening to an iPod/iPhone You can connect an Apple iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to the USB input terminal on the control panel or USB cable from the rear of the unit. ~ Ÿ USB input terminal ] Turns on the power. Apple iPod/iPhone USB cable from the rear of the unit and/or USB 2.0 cable (accessory of the iPod/iPhone) Playback starts automatically. Cautions: Selecting a track from the menu • Avoid using the iPod/iPhone if it might hinder Not applicable und
ページ18に含まれる内容の要旨
You can also use the search menu (A to Z and Selecting the playback modes 0 to 9) to scroll through the desired menu. Not applicable under . After you have selected your desired menu (in step 2 on page 17).... 1 1 Press 5/∞ to show the search menu. [Hold] The first character of the current file name appears. 2 2 Press 5/∞ to select your desired character. Then press the control dial to confirm. ] “REPEAT” j “RANDOM” The track list with the selected character 3 appea
ページ19に含まれる内容の要旨
Searching the registered station from Using the iPod/iPhone the list application You can operate the Pandora application and 1 some of the JVC original application (eg. JVC Drive Smart) with this unit in . 2 JVC original application (eg. JVC Drive Smart) ] Select the desired menu. For JVC Drive Smart operations, visit JVC web Displays the list of stations: site: (English website only). date)
ページ20に含まれる内容の要旨
Changing the display information Additional information Pandora can be operated only for the compatible iPod Touch/iPhone. For iPod Touch, Pandora can only be Station name = Album name/Artist name = controlled under Wi-Fi connection. Track title = Elapsed playing time = Clock Due to music licensing restrictions, the Pandora radio time = (back to the beginning) service application is available in the United States. • Press and hold DISP to scroll the current display information. Listening
