ページ1に含まれる内容の要旨
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ТОЛЬКО
ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE/ΓΙΑ ΡΗΣΗ Μ Ν ΣΕ ΑΥΤ ΚΙΝΗΤ
EN
R
RDS MP3/WMA/AAC CD Receiver
DE
CDE-9880R/
FR
CDE-9882Ri
ES
• OWNER’S MANUAL • ANVÄNDARHANDLEDNING
IT
Please read before using this equipment. Innan du använder utrustningen bör du läsa
igenom denna anvä
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
ENGLISH CD/MP3/WMA/AAC Contents Playback ..........................................................11 Repeat Play .....................................................12 Operating Instructions M.I.X. (Random Play) ....................................12 Searching for CD Text ....................................12 WARNING File/Folder Name Search (concerning MP3/WMA/AAC) ................... 13 WARNING ................................................. 3 Quick Search ...............................
ページ4に含まれる内容の要旨
External Device Connecting to an External Amplifier ...............19 Turning Mute Mode On / Off (INT MUTE) ....20 Setting the AUX+ SETUP Mode ..................... 20 Setting the AUX+ NAME mode ...................... 20 Setting the AUX+ Level (AUX IN GAIN) ...... 20 USB memory (Optional) Controlling USB memory (Optional) ............. 20 Playing MP3/WMA/AAC Files with the USB memory (Optional) ...................................... 20 ® iPod (Optional) Playback ................................
ページ5に含まれる内容の要旨
Operating Instructions WARNING CAUTION This symbol means important instructions. Failure to heed them can result in injury or WARNING material property damage. This symbol means important instructions. Failure to heed them can result in serious injury HALT USE IMMEDIATELY IF A PROBLEM APPEARS. or death. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. DO NOT OPERATE ANY FUNCTI
ページ6に含まれる内容の要旨
Never Attempt the Following Installation Location Do not grip or pull out the disc while it is being pulled back into the Make sure this unit will not be installed in a location subjected to: player by the automatic reloading mechanism. Direct sun and heat Do not attempt to insert a disc into the unit when the unit power is High humidity and water off. Excessive dust Excessive vibrations Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerpr
ページ7に含まれる内容の要旨
On handling Compact Discs (CD/CD-R/CD-RW) CAUTION Do not touch the surface. Alpine accepts no responsibility for lost data, etc., even if data, etc., Do not expose the disc to direct sunlight. is lost while using this product. Do not affix stickers or labels. Clean the disc when it is dusty. Make sure that there are no bumps around the disc. On Handling USB Memory Do not use commercially available disc accessories. To prevent malfunction or damage, note the following points. Do no
ページ8に含まれる内容の要旨
3 Grasp the front panel firmly, slide to the left , and then pull to remove. Getting Started (OPEN) MUTE The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. To protect the front panel, place it in the supplied carrying case. When detaching the front panel, do not apply excessive force as it SOURCE/ Rotary encoder may result in malfunction. Do not leave the front panel open, or drive the car w
ページ9に含まれる内容の要旨
Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Press (OPEN) to open the front panel, and then remove it. 3 Press RESET with a ballpoint pen or similar pointed object. RESET switch Adjusting Volume Turn the Rotary encoder until the desired sound is obtained. Lowering Volume Quickly Activating the Audio Mute function will instantly lower the volume level by 20 dB. Press MUTE t
ページ10に含まれる内容の要旨
Presetting Stations Automatically Radio 1 Press BAND/TA repeatedly until the desired radio Rotary encoder band is displayed. SOURCE/ /ENT 2 Press and hold TUNE/A.ME for at least 2 seconds. BAND/TA TUNE/A.ME The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. When the automatic memory has been
ページ11に含まれる内容の要旨
Recalling Preset RDS Stations RDS 1 Press F/SETUP so that the indicator lights up. Rotary encoder BAND/TA /ENT 2 Press 1 AF to activate the RDS mode. 3 Press F/SETUP to activate the normal mode. The indicator goes out. 4 Make sure that the indicator light goes out, then press the preset button in which your desired RDS station is preset. If the preset station’s signal is weak, the unit automatically VIEW F/SETUP searches and tunes to a stronger station in the AF /ESC 1 AF NEWS 2 3 PTY (A
ページ12に含まれる内容の要旨
If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal PI SEEK Setting remains below a certain level for over 1 minute, the “TA” indicator blinks. 1 Press and hold F/SETUP for at least 2 seconds to If you do not want to listen to the traffic information being received, lightly press BAND/TA to skip that traffic information message. The activate the SETUP mode. TA mode will remain in the ON position to
ページ13に含まれる内容の要旨
When traffic information stations cannot be received: In the CD mode: CD/MP3/WMA/AAC When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. SOURCE/ Rotary encoder /ENT The receiver is equipped with the EON (Enhanced Other Networks) (OPEN) / function in order to keep track of additional alternate frequencies to the AF list. The “EON” indicator lights up while an RDS EON station is being received. If the station be
ページ14に含まれる内容の要旨
6 After pressing (OPEN) to open the front panel, press to eject the disc. M.I.X. (Random Play) Do not remove a CD during its eject cycle. Do not load more than Press 5 in the play or pause mode. one disc at a time. A malfunction may result from doing either. The tracks (files) on the disc will be played back in random If the CD does not eject, press and hold for at least 2 seconds. sequence. The “DISC IN” indicator lights up when a disc is inserted. The CD-player can play discs
ページ15に含まれる内容の要旨
File/Folder Name Search About MP3/WMA/AAC (concerning MP3/WMA/AAC) CAUTION Folder and file names may be searched and displayed during playback. Except for private use, duplicating audio data (including MP3/ WMA/AAC data) or distributing, transferring, or copying it, 1 During MP3/WMA/AAC playback, press /ENT to whether for free or for a fee, without permission of the copyright activate the search mode. holder is strictly prohibited by the Copyright Act and by international treaty. 2 Turn the
ページ16に含まれる内容の要旨
Supported playback sampling rates and bit rates Order of files Files are played back in the order that the writing software writes MP3 them to the disc. Therefore, the playback order may not be what Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, is expected. Verify the writing order in the software’s 16 kHz, 12 kHz, 11.025 kHz, 8 kHz documentation. The playback order of the folders and files is as Bit rates: 32 - 320 kbps follows. WMA Sampling rates: 48 kHz, 44.1 kHz, 32 kHz B
ページ17に含まれる内容の要旨
1 * When the subwoofer mode is set to OFF, its level cannot be adjusted. The adjustment can also be made by pressing Rotary encoder Sound Setting (AUDIO). Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 15). 2 SOURCE/ Rotary encoder (AUDIO/LOUD) * The function is inoperable when DEFEAT is set to ON. BAND/TA /ENT Setting the Bass Control You can change the Bass Frequency emphasis to create your own tonal
ページ18に含まれる内容の要旨
9 * When the subwoofer mode is set to OFF, its level cannot be adjusted. Refer to “Turning Subwoofer ON/OFF” (page 16). Setting the Treble Control 10 * The function is inoperable when DEFEAT is set to ON. You can change the Treble Frequency emphasis to create your own tonal preference. Turning Subwoofer ON/OFF 1 Press SOUND to activate the Sound Setting mode. When the subwoofer is on, you can adjust the subwoofer output level 2 Turn the Rotary encoder to select the TREBLE (refer to page 15).
ページ19に含まれる内容の要旨
About the indication display When displaying Text, the following indicators are lit Other Functions according to the mode. VIEW Blinks in search mode when the Rotary encoder is turned. Also blinks when operation, such as fast forward etc., is performed. Displaying the Text Lights up in SETUP mode or SOUND setting menu mode. Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to MP3/WMA/AAC/ Indicator/ iPod/BT
ページ20に含まれる内容の要旨
BLUETOOTH IN SETUP Setting the Bluetooth Connection You can flexibly customize the unit to suit your own preferences and BT IN ADAPTE / BT IN OFF (Initial setting) usage. From the SETUP menu, Sound Customizing, Visual If an optional Bluetooth Box is connected, you can place a hands-free Customizing, etc., can be modified. call by a Bluetooth-equipped mobile phone. Make this setting when the Bluetooth Box is connected and the Rotary encoder /ENT Bluetooth function is used. For details, refer t
