ページ1に含まれる内容の要旨
4.5” Wide Screen LCD Monitor
Model: LCM45NB
Owner’s Manual
Features:
• 4.5” Widescreen (16:9) TFT Color LCD Display
• Rearview Camera Input
• Interior Camera Input
• Audiovox Navigation Input
• NTSC /PAL Camera Compatible
ページ2に含まれる内容の要旨
This product must be installed and used only in accordance with these instructions. Any alteration of this product that enables it to be used in ways other than those stated in this manual could distract the driver and result in an accident or injury. AUDIOVOX ELECTRONICS CORP. DISCLAIMS ANY LIABILITY THAT MAY RESULT FROM A FAILURE TO INSTALL AND OPERATE AS INDICATED IN THESE MANUALS. Warnings Backing up vehicle Do not back up vehicle while watching the monitor screen. Always look in
ページ3に含まれる内容の要旨
CONTROLS AND INDICATORS AUDIOVOX Figure 1. LCM45NB Monitor Controls and Indicators A: 4.5” TFT color LCD B: Speaker volume control: adjusts the rearview camera volume only when the vehicle is in reverse. C: LCD brightness control: adjusts the brightness of display. D: Camera switch (see below). E: Remote IR Sensor for Audiovox Navigation only. CAMERA SWITCH 1). When switch D is pressed and the vehicle is shifted into reverse gear: • No function 2). When sw
ページ4に含まれる内容の要旨
TURNING THE LCD MONITOR ON/OFF The LCD Monitor turns ON every time the ignition key is turned ON and system powered up. The monitor turns OFF every the Ignition key is turned OFF and the system powered down. VIEWING THE REAR OBSERVATION CAMERA IMAGE (optional) If a rear observation camera is installed, the monitor will display the rear observation camera image whenever the vehicle is shifted into the reverse gear. The rear observation camera image turns off automatically any time the g
ページ5に含まれる内容の要旨
LCD MONITOR BRIGHTNESS CONTROL The brightness adjustment control is on the bottom right of the monitor (see Figure 1-C). Rotating the wheel to the right will decrease the brightness. Rotating the wheel to the left will increase the brightness. SPEAKER VOLUME CONTROL The speaker volume control is on the bottom left side of the monitor (see Figure 1-B). This control is used only to adjust the rearview camera audio level. The vehicle must be shifted into reverse in order to hear and adju
ページ6に含まれる内容の要旨
Maintenance Though your monitor requires little care, you can still maintain its condition and performance by following the procedures below. • Keep your system away from excessive moisture, extreme heat or cold, and magnetic fields. • Keep liquids away from the display . • To avoid damage, do not place external devices or other objects on the top of the monitor. • Occasionally wipe the monitor display with a soft, damp cloth. • Occasionally clean the surface of the monitor with
ページ7に含まれる内容の要旨
Troubleshooting Symptoms Solutions Check that the cable from the control No video signal appears while box is connected properly to the reversing the vehicle? monitor. Video image is not sharp Clean the lens of the camera. enough? Specifications General Power Supply DC12V Power Consumption <10W Current Draw <800 mA Audio Power Output 0.5W ×1 (16 Ω) Operating Temperature Range 0 ℃ to 50 ℃ Display System Screen 4.5” TFT Color LCD Brightness 400 cd/ ㎡
ページ8に含まれる内容の要旨
© 2005 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-7568 7
