ページ1に含まれる内容の要旨
PLCDCS330MP
OWNER’S MANUAL
Mobile Audio System
• PLL Synthesizer Stereo Radio
• Car CD/MP3/WMA Player
• Cassette Player
• Automatic Memory Storing
• Preset Equalization
• Slide Down Undetachable Panel
• Auxiliary Input Function
• Remote Control
www.pyleaudio.com
ページ2に含まれる内容の要旨
CONTENTS Installation ...........................................3 AS/PS/D-AUD button.....................10 Wiring Connection ..............................4 Display information.........................11 Operation .............................................5 WMA operation..................................11 Location of keys....................................5 Audio DSP (MP3/WMA Decoder) ......11 Switching on/off the unit.......................6 Disc notes ...................................
ページ3に含まれる内容の要旨
INSTALLATION Installation onto the car bracket using supplied screws (M5 x 6mm). The holes of the car bracket to use will differ depending on the car model. Screw (M5 x 6mm) 3
ページ4に含まれる内容の要旨
WIRING CONNECTION MAIN UNIT ANTENNA SOCKET (GREEN) SUBWOOFER CABLE FUSE IGNITION RED (BLACK) SWITCH Rch RED AUX IN (ACC+) Lch WHITE YELLOW MEMORY BACK-UP (B+) (GREY) BLACK Rch RED RCA CABLE GROUND (B–) Lch WHITE BLUE POWER ANTENNA WHITE GREY FRONT Lch FRONT Rch SPEAKER SPEAKER WHITE/BLACK GREY/BLACK GREEN VIOLET REAR Lch REAR Rch SPEAKER SPEAKER GREEN/BLACK VIOLET/BLACK 4
ページ5に含まれる内容の要旨
OPERATION LOCATION OF KEYS 21 20 19 4 1 18 9 7 15 23 24 2 3 22 11 6 16 28 14 12 13 17 8 10 27 5 26 25 5
ページ6に含まれる内容の要旨
OPERATION Note: In this product design, there has • SET THE CLOCK different sound accompanying with every Press the DSP button (15), the clock is button pressed and the sound is designed shown on the LCD display. Then hold differently according to the customers. down the button until the clock flashes. Then press the TUNE/TRACK/SKIP • SWITCHING ON/OFF THE UNIT button (17) to change hours or Switch on the unit by pressing any TUNE/TRACK/SKIP button (16) to button (except CD OPEN/CLOSE/EJ ch
ページ7に含まれる内容の要旨
OPERATION • STATION STORING RADIO OPERATION Press any one of the preset buttons • SWITCHING TO RADIO MODE (18) (1 to 6) to select a station which Press MODE button (6) shortly to had been stored in the memory. select radio mode, the radio mode Press this button for several seconds appears in the display together with (until 2ND beeps come out), current the memory band and frequency. station is stored into the number button. • SELECTING THE FREQUENCY BAND • MONO/STEREO At radio mode, press
ページ8に含まれる内容の要旨
OPERATION • PROGRAM BUTTON • SWITCHING TO CD MODE These two buttons (25) perform the If there is no CD inserted in the driver: dual functions of changing the Gently insert the CD with the printed direction of tape playback and fast side uppermost into the CD forward/rewind of the tape. compartment until you feel some - Change Tape Playback Direction resistance. The CD is drawn into the Press both buttons together to play driver automatically. CD playback the other side of a tape. begins. -
ページ9に含まれる内容の要旨
OPERATION selecting each mode of Digital Audio. MP3 OPERATION “Searching track directly” => • SWITCHING TO CD (MP3) MODE “Searching Directory or File Name”=> If there is no MP3 disc inserted in the “Navigation” from root by driver: TUNE/TRACK/SKIP UP/DOWN Gently insert the MP3 disc with the buttons=> “Navigation” from current printed side uppermost into the disc directory by TUNE/TRACK/SKIP slot (5) until you feel some resistance. UP/DOWN buttons. The MP3 disc is drawn into the driver automatica
ページ10に含まれる内容の要旨
OPERATION confirm and start the play. contents…) and other information. - Repeat the above steps if the newly KEY Assigned IN Searching mode (Table 1) selected title is again a directory. AS/PS Mode Select Searching From Root Directory Press AS/PS (D-AUD) button for three BND/LOU ENTER times. The unit searches file or directory from root by M1 A, B, C, 1 TUNE/TRACK/SKIP UP/DOWN M2 D, E, F, 2 buttons. (D-DIR icon turns on if the name is directory). Display will list all M3 G, H, I, 3 available
ページ11に含まれる内容の要旨
OPERATION DISC NOTE WMA OPERATION The unit that can play the WMA disc and A. Notes on discs: the operation is the same with MP3 1.Attempting to use non-standard shape operation described above. discs (e.g. square, start, heart) may damage the unit. Be sure to use round AUDIO DSP (MP3/WMA DECODER) shape CD discs only for this unit. The audio DSP converts MP3/WMA 2.Do not stick paper or tape etc., onto stream data from the CD-ROM decoder the label side or the recording side of to PCM data. an
ページ12に含まれる内容の要旨
REMOTE CONTROL HANDSET 1 7 4 3 8 9 6 5 13 2 12 10 11 14 15 FUNCTION KEYS & CONTROL 1. PWR = Power ON/OFF Button 2. DSP (0) = Display Button (_, –, +, 0 For MP3/WMA Operation ) 3. SEL = Sound Mode Select Button (Character Shift Right For MP3/WMA Operation ) 4. VOL = Volume Up Button [Character Select (A, B ~ 8, 9, 0) For MP3/WMA Operation] 5. VOL = Volume Down Button [Character Select (A, B ~ 8, 9, 0) For MP3/WMA Operation] 6. BND (LOU/ENT) = Band Select Button (When pressed shortly) Loudness But
ページ13に含まれる内容の要旨
SPECIFICATIONS GENERAL Power Supply Voltage : 12 Volts DC, Negative Ground Chassis Dimensions : 200 mm (W) x 138 mm (D) x 100 mm (H) Loading Impedance : 4 - 8 Ω per channel Maximum Output Power : 4 x 50 Watts Current Drain : 15 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 55 dB Channel Separation : More than 50 dB Frequency Response : 20 Hz - 20 KHz CASSETTE PLAYER Tape Speed : 4.76 cm/sec Fast Forward Time : 180 seconds (C-60 type) Frequency Response : 50 to 8,000 Hz Channel Separa
ページ14に含まれる内容の要旨
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is not on. connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Disc cannot Presence of CD disc inside Remove the disc in the player, then be loaded or
ページ15に含まれる内容の要旨
MAINTENANCE 3. Clean the tape head with the cotton For System swab. The following suggestions help you care for the product so that you can enjoy it for years. 1. Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. 4. Clean the capstans and the pinch 2. Keep the product away from dust and rollers with the cotton swab. dirt, which can cause premature wear 5. Allow the tape head, capstans and of parts. pi
ページ16に含まれる内容の要旨
CAUTION 1. This unit is designed to operate on 3. Your unit has built-in filtering to 12-volts DC, negative ground eliminate most of the noise that might electrical system only. Do not attempt come through the power source. to install this unit in a vehicle having a However, with some vehicles, positive ground system. particularly older models, some clicking or other unwanted noise 2. You should not touch the might be present. high-polished playback head with any metallic or magnetic tools
