ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
CONTENTS Installation ...........................................3 Repeating the same track.................10 Take out screw before installation.........3 Playing all tracks in random..............11 DIN Front-Mount (Method A) ................3 Ejecting a disc ..................................11 Installing the unit.................................3 MP3 operation ...................................11 Removing the unit...............................4 Switching to CD (MP3) mode............ 11 DIN
ページ3に含まれる内容の要旨
INSTALLATION Notes: TAKE OUT SCREW BEFORE INSTALLATION • Choose the mounting location where Before install the unit, please remove the the unit will not interfere with the two screws. normal driving function of the driver. Take out screw before installation • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation. Th
ページ4に含まれる内容の要旨
INSTALLATION grounding of the unit. Sleeve Note to install the short threading L Key Outer Trim Ring terminal of the mounting bolt to the back Front Panel of the unit and the other long threading terminal to the dashboard. Spring Washer Hex Nut Metal Strap R Key Mounting Bolt Plain Washer Tapping Screw 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so exa
ページ5に含まれる内容の要旨
INSTALLATION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Side view showing Screw Holes marked T, N Factory Radio Screw Mounting Bracket Screw Dashboard or Console To fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with the screw h
ページ6に含まれる内容の要旨
USING THE DETACHABLE FRONT PANEL REMOVING THE FRONT PANEL Precautions when handing 1. Press the release button (RELEASE) 1. Do not drop the front panel. on the front panel and pull off the front 2. Do not put pressure on the display or panel. control buttons when removing or installing the front panel. 3. Do not touch the contacts on the front panel or on the main unit body. It may Release Button result in poor electrical contact. 4. If any dirt or foreign substances adhered on the contacts, th
ページ7に含まれる内容の要旨
WIRING CONNECTION MAIN UNIT ANTENNA CONNECTOR FUSE RED IGNITION SWITCH (ACC+) FUSE (GREY) MEMORY YELLOW Rch RED RCA CABLE BACK-UP (B+) BLACK Lch WHITE GROUND (B–) POWER BLUE ANTENNA WHITE GREY FRONT Lch FRONT Lch SPEAKER SPEAKER WHITE/BLACK GREY/BLACK GREEN VIOLET REAR Lch REAR Rch SPEAKER SPEAKER GREEN/BLACK VIOLET/BLACK 7
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
OPERATION SWITCHING ON/OFF THE UNIT press the button (17) to change hours Switch on the unit by pressing any button or button (16) to change minutes. (except button (7) and button (4)). MUTE When system is on, press button (9) to In radio and AUX mode, press MUTE turn off the unit. button (3) to mute down sound. Press it again to release this mode and recover FACEPLATE RELEASE previous volume level. Press button (7) to detach the removable faceplate. EQUALIZATION Press EQ button (19) to tu
ページ10に含まれる内容の要旨
OPERATION 2ND beeps come out ), current station RADIO OPERATION is stored into the number button. • SWITCHING TO RADIO MODE • LOCAL/DISTANT Press MODE button (6) shortly to Press LOC button (2) to select select radio mode, the radio mode between local and distant stations. appears in the display together with Local setting for reception of strong the memory band and frequency. station, and a distant setting for • SELECTING THE FREQUENCY reception of weaker stations. This BAND function is eff
ページ11に含まれる内容の要旨
OPERATION • PLAYING ALL TRACKS IN RANDOM • PLAYING ALL TRACKS IN RANDOM Press SHF button (23) to play all Press SHF button (23) to play all tracks tracks on CD in random order. Press on MP3 disc in random order. Press again to cancel the function. again to cancel the function. • SELECTING TRACKS BY AMS/D- • EJECTING A DISC Press button (4) to stop CD playing AUD BUTTON and eject the disc from the disc slot AMS (D-AUD) button is assigned as (5). Digital Audio Mode selection button in MP3 operat
ページ12に含まれる内容の要旨
OPERATION (‘ ‘), then AMS Mode Select - Use the TUNE/TRACK UP/DOWN buttons to list all songs under this BND/LOU ENTER directory and select the title. M1 A, B, C, 1 - Press BND/LOU (ENT) button to M2 D, E, F, 2 confirm and start the play. M3 G, H, I, 3 - Repeat the above steps if the newly selected title is again a directory. M4 J, K, L, 4 • Searching From Root Directory M5 M, N, O, 5/ Directory DOWN Press AMS (D-AUD) button for three times. The unit searches file or M6 P, Q, R, 6/ Director
ページ13に含まれる内容の要旨
ページ14に含まれる内容の要旨
OPERATION DISC NOTE file name extension is “.MP3”, the unit A. Notes on discs: cannot recognize it. 1.Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use round shape CD discs only for this unit. 2.Do not stick paper or tape etc., onto the label side or the recording side of any discs, as it may cause a malfunction. 3.Dirt, dust, scratches and warping discs will cause misoperation. B. Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable
ページ15に含まれる内容の要旨
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output Power : 4 x 25 Watts Current Drain : 5 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 55 dB Channel Separation : More than 45 dB Frequency Response : 40 Hz - 18 KHz RADIO FM Frequency Coverage : 87.5 to 107.9 MHz IF : 10.7 MHz Sensitivity (S/N = 30 dB) : 4 μV Stereo Separa
ページ16に含まれる内容の要旨
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is not on. connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Disc cannot be Presence of CD disc inside Remove the disc in the player, loaded or eje
