ページ1に含まれる内容の要旨
English
Français
MANUEL D’INSTALLATION
CRD4067A_U_inst_cover 10/24/05 19:47 Page 1
AVIC-D2
This product conforms to CEMA cord colors.
Le code de couleur des câbles utilisé pour ce produit est
conforme à CEMA.
1
ENG/MASTER COVER 98 INST
INSTALLATION MANUAL
ページ2に含まれる内容の要旨
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 2 IMPORTANT INFORMATION ABOUT YOUR NEW NAVIGATION SYSTEM AND THIS MANUAL • The navigation features of this product (and rear view camera option if pur- chased) is intended solely as an aid to you in the operation of your vehicle. It is not a substitute for your attentiveness, judgment and care when driving. • Never use this navigation system to route to hospitals, police stations, or similar facilities in an emergency, Please call 911. • Do not o
ページ3に含まれる内容の要旨
English Deutsch Italiano Español Français Nederlands CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 3 Contents IMPORTANT INFORMATION .................... 1 Installation ................................................ 17 ABOUT YOUR NEW NAVIGATION To guard against electromagnetic SYSTEM AND THIS MANUAL .............. 1 interference ..............................................18 Before installing .............................................. 18 Installing this product ......................
ページ4に含まれる内容の要旨
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 4 IMPORTANT SAFEGUARDS PLEASE READ ALL OF THESE INSTRUCTIONS REGARDING YOUR NAVIGATION SYSTEM AND RETAIN THEM FOR FUTURE REFERENCE 1. Read this manual fully and carefully before installing your navigation system. 2. Keep this manual handy for future reference. 3. Pay close attention to all warnings in this manual and follow the instructions care- fully. 4. This navigation system may in certain circumstances display erroneous informa- tion regard
ページ5に含まれる内容の要旨
English Deutsch Italiano Español Français Nederlands CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 5 Connecting the System • Pioneer does not recommend that you install your navigation system yourself. We recommend that only authorized Pioneer service personnel, who have special train- ing and experience in mobile electronics, set up and install this product. NEVER SERVICE THIS PRODUCT YOURSELF. Installing or servicing this product and its connecting cables may expose you to the risk of elec
ページ6に含まれる内容の要旨
T T R R A A T T S S N N O O C CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 6 Connecting the System Before installing this product • This product is for vehicles with a 12-volt battery and negative grounding. Check the battery voltage of your vehicle before installation. • To avoid shorts in the electrical sys- tem, be sure to disconnect the (–) battery cable before beginning installation. To prevent damage When replacing the fuse, be sure to only use a fuse of the rating prescribed on the
ページ7に含まれる内容の要旨
English Deutsch Italiano Español Français Nederlands CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 7 • Never connect speakers with an output rating of less than 50 W channel or impedance outside of the 4 ohms to 8 ohms specifications to your navigation system. Connecting speakers with output and/or impedance values other than those noted here may result in the speakers catching fire, emitting smoke, or becoming damaged. • When the ignition switch is turned on (ACC ON), a control signal is ou
ページ8に含まれる内容の要旨
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 8 Connecting the System Connecting the system WIRED REMOTE IN Please see the Instruction Manual for RCA connector the Wired Remote Control Adapters (sold separately). See Page 13 to 16. Power cord See Page 9 to 12. Black This product Antenna jack Black *2 Light gray Blue Blue 5 m (16 ft. 5 in.) GPS antenna Note: IP-BUS cable The XM tuner will not receive XM Radio (supplied with XM tuner) service when you drive outside of the XM’s coverag
ページ9に含まれる内容の要旨
English Deutsch Italiano Español Français Nederlands CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 9 • To avoid the risk of accident and the potential violation of applicable laws, this product should never be used while the vehicle is being driven except for navigation purposes. And, also Rear Displays should not be in a location where it is a visible distraction to the driver. • In some countries or states the viewing of images on a display inside a vehicle, even by persons other than the
ページ10に含まれる内容の要旨
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 10 Connecting the System Connecting the power cord (1) Fuse (10 A) Yellow To terminal always supplied with power regardless of ignition switch position. Fuse resistor Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF. Orange/white Fuse resistor To lighting switch terminal. Black (ground) To vehicle (metal) body. With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. White
ページ11に含まれる内容の要旨
English Deutsch Italiano Español Français Nederlands CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 11 This product Note: Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied manuals of both prod- ucts and connect cords that have the same function. Yellow/black If you use equipment with a mute function (e.g. cellular telephones), connect that equipment to the Au
ページ12に含まれる内容の要旨
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 12 Connecting the System Connecting the power cord (2) Speed detection circuit lead Vehicle injection Connector Pink (CAR SPEED SIGNAL INPUT) computer The mobile navigation system is connected here to detect the distance the vehicle travels. Always connect the vehicle’s speed detection circuit or the ND-PG1 speed pulse generator, sold separately. Failure to make this connection will increase errors in the location display. IMPROPER CONNECTION
ページ13に含まれる内容の要旨
English Deutsch Italiano Español Français Nederlands CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 13 Extension lead (for speed signal) 5 m (16 ft. 5 in.) This product Note: Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied manuals of both prod- ucts and connect cords that have the same function. Power cord For information on other leads See Page 9. Violet/
ページ14に含まれる内容の要旨
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 14 Connecting the System When connecting to separately sold power amp For information on other cables See Page 15 to 16. Subwoofer output or non-fading output (SUBWOOFER OUTPUT or NON-FANDING OUTPUT) 23 cm (9 in.) Rear output (REAR OUTPUT) 15 cm (5–7/8 in.) Front output (FRONT OUTPUT) This product 15 cm (5–7/8 in.) Blue/white To system control terminal of the power amp (max. 300 mA 12 V DC). Do not connect this lead to Auto-antenna control t
ページ15に含まれる内容の要旨
English Deutsch Italiano Español Français Nederlands CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 15 Perform these connections when using the optional amplifier. Power amp (sold separately) RCA cables (sold separately) Power amp (sold separately) Power amp (sold separately) System remote control Left Right + + Front speaker Front speaker ≠ ≠ + + Rear speaker Rear speaker ≠ ≠ + + Subwoofer Subwoofer ≠ ≠ Note: You can change the RCA output of the subwoofer depending on your subwoofer system.
ページ16に含まれる内容の要旨
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 16 Connecting the System When connecting a Rear view camera When using this product with a rear view camera, automatic switching to video from a rear view camera is possible when the gear shift is moved to REVERSE (R) position. Rear view mode also allows you to check what is behind you while driving. USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. • The screen image may appear reversed. • The
ページ17に含まれる内容の要旨
English Deutsch Italiano Español Français Nederlands CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 17 When connecting the external video component and the display This product Note: The map screen navigation images output to the rear display differ from standard NTSC format images. Therefore, their qual- ity will be inferior to the images that appear on the front display. 20 cm (7 - 7/8 in.) For information on other cables See Page 13 to 15. Yellow (VIDEO INPUT) Red, white (AUDIO INPUT) 1
ページ18に含まれる内容の要旨
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 18 Installation • Pioneer does not recommend that you install or service your navigation sys- tem yourself. Installing or servicing this product may expose you to risk of electric shock or other hazards. Refer all installation and servicing of your navigation system to authorized Pioneer service personnel. • Never install this product in places, or in a manner that where: * It could injure the driver or passengers if the vehicle stops suddenly. *
ページ19に含まれる内容の要旨
English Deutsch Italiano Español Français Nederlands CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 19 • Install this product between the driver’s seat and front passenger seat so that it will not be hit by the driver or passenger if the vehicle stops quickly. • Never install this product in front of or next to the place in the dash, door, or pillar from which one of your vehicle’s airbags would deploy. Please refer to your vehicle’s Owner’s Manual for reference to the deployment area of the
ページ20に含まれる内容の要旨
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 20 Installation Installing this product Installation notes • Do not install this product in places where it may become subject to high temperatures or humidity, such as: * places close to a heater, vent or air conditioner. * places exposed to direct sunlight, such as on top of the dashboard. * places that may be splashed by rain, for example close to the door. • Install this product in an area strong enough to bear its weight. Choose a position w
