ページ1に含まれる内容の要旨
Stereo Cassette (120-1998) Features Faxback Doc. # 6932
The Optimus In-Dash AM/FM Stereo Cassette with Auto-Stop has many
practical, easy-to-use features, and you can install it in almost any
vehicle. The tuner's digital synthesized circuitry gives you precise
tuning and drift-free reception.
The stereo's anti-theft control panel lets you quickly remove and store
it, making the stereo inoperative.
The stereo contains many features that let you operate it easily
ページ2に含まれる内容の要旨
Locking Fast Forward - quickly fast-forwards the cassette tape with the touch of a button. Advanced FM Optimizer Circuitry - Automatically adjusts the tuner's stereo separation and high-frequency response regardless of the signal level, giving you the best possible sound. Built-In Noise-Suppression Choke - reduces the noise caused by your
ページ3に含まれる内容の要旨
Stereo Cassette (120-1998) Installation Faxback Doc. # 6931 BEFORE YOU BEGIN THE INSTALLATION Before you install the stereo, carefully read all instructions and see if you can answer these questions about the vehicle's electrical and sound systems. * Does my vehicle have a 12-volt negative ground system? * Which of the stereo's wires is the power wire? * Which terminal on my vehicle's fuse box is for accessories? * How do I connect a wire to the fuse bo
ページ4に含まれる内容の要旨
If you install speakers, avoid routing the speaker wire near moving parts or sharp edges. You can usually route it along the wiring channel beneath the vehicle's door facings by carefully removing the molding that holds the carpet in place. After you route the speaker wire, replace the molding. Testing the Stereo Before you mount the stereo or any speakers you are installing, test the stereo by temporarily connecting the speakers, power wires, and antenna. Important: Do not cu
ページ5に含まれる内容の要旨
connect the power and speakers. Connecting the Speakers 1. Connect the gray wire to the right speaker's positive terminal. This terminal is usually marked with a plus(+) sign or red mark. 2. Connect the gray/black wire to the right speaker's negative terminal. This terminal might be marked with a minus (-) sign or it might not be marked at all. 3. Connect the white wire to the left speaker's positive terminal. 4. Connect the white/black wire to the left speaker
ページ6に含まれる内容の要旨
Connecting the Antenna and the Battery Connect the vehicle's antenna cable to the stereo's large black antenna connector, then reconnect the cable to the vehicle battery's negative terminal. TESTING THE CONNECTIONS Turn on your vehicle's ignition and test the stereo. If the stereo does not work, immediately disconnect your vehicle battery's negative (-) terminal. Then, recheck your connections, or have a professional auto sound system installer install the stereo. After you
ページ7に含まれる内容の要旨
7. Reconnect the cable to the vehicle battery's negative (-) terminal. REMOVING THE STEREO FROM THE DASH 1. Disconnect the cable from the vehicle battery's negative (-) terminal. 2. Remove the metal strap attached to the back of the stereo. 3. Insert both of the provided keys into the slots at the lower left and right sides of the stereo. Then slide the stereo out of the dash. 4. Remove the keys from the slots by pressing the latches either below the keys or on the
ページ8に含まれる内容の要旨
Stereo Cassette (120-1998) Compact Disk Use Faxback Doc. # 6928 CONNECTING A COMPACT DISC PLAYER You can connect a portable CD player (or other audio component with a line-level output) to the stereo. Use a stereo mini-jack cable with 1/8-inch plugs, such as Cat. No. 420-2387. Connect one end of the cable to the stereo's CD IN jack. Connect the cable's other end to the output jack of the CD player when you are not using it.
ページ9に含まれる内容の要旨
Stereo Cassette (120-1998) Control Panel Faxback Doc. # 6926 The stereo's control panel must be in place for the stereo to operate. When you remove it, the clock will display, but the stereo cannot be used. This is a simple, but effective, security feature REMOVING THE CONTROL PANEL 1. Push down DOWN ARROW until you hear a click. The control panel swings out. 2. Remove the control panel, then store it in the supplied case. REINSTALLING THE CONTROL PANEL
ページ10に含まれる内容の要旨
Stereo Cassette (120-1998) Operations Faxback Doc. # 6929 UNDERSTANDING THE CONTROLS When you listen to your stereo, adjust the following controls to suit your listening preferences. ON/VOL-To turn on the stereo, turn this knob clockwise until you hear it click. Turn the knob further clockwise to adjust the volume. To turn off the stereo, turn the knob counterclockwise until you hear it click. Warning: To protect your hearing, do not listen at high volume l
ページ11に含まれる内容の要旨
3. Tune to the desired station in one of the following ways. Manual Tuning: Repeatedly press TUN/SEEK UP ARROW or DOWN ARROW to tune up or down the selected band. Seek Tuning: Press and hold TUN/SEEK UP ARROW or DOWN ARROW for about 1 second to tune to the next higher or lower station with a strong signal. 4. Adjust ON/VOL, BASS, TREBLE and BAL as desired. Notes: * ST appears on the display when an FM stereo signal is received.
ページ12に含まれる内容の要旨
Stereo Cassette (120-1998) Memory Faxback Doc. # 6930 Storing Stations You can store up to 12 AM and 18 FM stations in memory. You can then select a stored station by pressing the correct memory location button. 1. Press BAND to select the desired band. 2. Use either of the tuning methods to tune to the station you want to store. 3. Press and hold the desired memory location button for about 2 seconds until it sounds a beep. The band numb
ページ13に含まれる内容の要旨
USING THE CASSETTE PLAYER Warning: To prevent hearing damage, always turn the volume to its lowest level before you begin listening to a tape. Note: Avoid using C-120 cassette tapes. They are very thin and easily become tangled in the tape-handling parts. Follow these steps to play a cassette tape. 1. Take up any slack by turning the cassette's hub with your finger or a pencil. Avoid touching the tape. 2. Insert the tape into the cassette comp
ページ14に含まれる内容の要旨
Stereo Cassette (120-1998) Specifications Faxback Doc. # 6927 RADIO FM AM Frequency Range 88-108 MHz 530-1710KHz IF Rejection 75 dB 60 dB Image Rejection 45 dB 70 dB Selectivity 60 dB 30 dB Signal-to-Noise (S/N) Ratio
