ページ1に含まれる内容の要旨
KDC-C20V
VIDEO CD AUTO CHANGER
INSTRUCTION MANUAL
VIDEO CD
© B64-1953-10 (MW)
ページ2に含まれる内容の要旨
Warning / Safety precautions this function and the number of usable The marking of products using lasers characters may be variable depending on the (Except for some areas) control unit in use. Do Not Use Special Shape CDs CLASS 1 • Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use LASER PRODUCT of special shape CDs may cause the unit to malfunction. The label is attached to the chassis/case and says that the component uses laser beams that have been c
ページ3に含まれる内容の要旨
Stains, scratches, or warping can cause skipping, malfunction, or low sound quality. Take the following precautions to avoid damage to the compact discs. •Avoid touching the recorded side (the side without the titles on) when you hold a compact disc. • The reflective film on a CD-R or a CD-RW is more fragile than that on an ordinary music CD, and may peel off if scratched. Fingerprints on a CD-R or CD-RW are also more likely to cause skipping when the disc is played. For these reasons, handle th
ページ4に含まれる内容の要旨
Installation Use the holes marked ● to install the unit. 2CAUTION Do not tighten the screw B too securely at the time of installation, but tighten it securely after having fixed the bracket A. ■ Horizontal installation Angle adjustment switch position S 0 45 0 90 45 V 90 0 45 90 90 C A B Ø4 4 0 45 90 English
ページ5に含まれる内容の要旨
0 45 90 AUX OFF ON ■ Vertical installation Angle adjustment switch position S 0 45 0 90 45 V 90 0 45 90 90 C A B Ø4 ■ In case of hanging in the trunk Angle adjustment switch position 0 S 45 90 V 0 45 0 45 90 90 90 Ø4 A B C 5 0 45 90
ページ6に含まれる内容の要旨
NTSC / PAL Connections O-N switch "S" "V" D Changer control cable (5m) NTSC / PAL Changer control terminal "NTSC" "PAL" Picture format selector switch Monitor unit (optional) F Video cable (4m) Control unit (optional) EMultiple audio selector switch (5m) 2CAUTION • Do not connect the changer control cable while the control unit is turned ON. • Be sure to press the reset button after installation. • Do not install an antenna of radio equipment or distribute the antenna cable near the chan
ページ7に含まれる内容の要旨
' ' O - N O - N ' Loading compact discs 4 1 Projection Make sure the disc magazine is the right Insert the magazine into the CD changer way up with the "disc" logo on the top.Pull until it clicks. the tray out by the projection. 2 5 Tray Close the CD changer door. NOTE Use the CD changer with its door closed to Place the disc on the tray with the label prevent the entry of dust into the changer. facing upwards. Insert the tray into the disc magazine until it locks. Check that the discs and tray
ページ8に含まれる内容の要旨
Operation Operate the KDC-C20V using the connected ■ Switching the multiple audio control unit. mode Operation is the same for the CD changer. The audio output mode switches in the (For details, refer to the control unit's disc following order when the included multiple control/CD changer mode.) audio selector switch is pressed while playing CDs: NOTE •With some video CD’s, the track number 3 L + R 3 L + L 3 R + R may differ from the jacket display,or may differ from the track number display on
ページ9に含まれる内容の要旨
Specifications Specifications subject to change without notice. Laser diode ..................................................................................................GaAlAs (λ=780 nm) Digital Filter..............................................................................................8 Time Over Sampling D/A Converter ............................................................................................................3 Level ∆∑ Spindle speed.................................
