ページ1に含まれる内容の要旨
CD-RECEIVER
KDC-W534
KDC-W534Y
INSTRUCTION MANUAL
© B64-3266-00/00 (EW/EN/E2W/E2N)
ページ2に含まれる内容の要旨
Contents Safety precautions 3 Menu system 21 Menu System Notes 4 Touch Sensor Tone Manual Clock Adjustment About AAC, MP3 and WMA 6 Synchronize Clock DSI (Disabled System Indicator) About CDs 7 Selectable Illumination Display Illumination Control General features 8 Supreme Setting Power News Bulletin with Timeout Setting Selecting the Source Local Seek Volume Tuning Mode (KDC-W534) Attenuator AF (Alternative Frequency) System Q Restricting RDS Region (Region Restrict Audio Control Function) Aud
ページ3に含まれる内容の要旨
Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD 2WARNING slot To prevent injury or fire, take the If you try to load a 8 cm (3 in.) CD with its adapter following precautions: into the unit, the adapter might separate from the • To prevent a short circuit, never put or leave any CD and damage the unit. metallic objects (such as coins or metal tools) inside the unit. Lens Fogging • Mounting and wiring this product requires When you turn on the car heater in cold weather, skills a
ページ4に含まれる内容の要旨
Notes • If you experience problems during installation, Cleaning the Faceplate Terminals consult your Kenwood dealer. If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. Before using this unit for the first time • If the unit fails to operate properly, press the Reset This unit is initially set on the Demonstration mod
ページ5に含まれる内容の要旨
This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handli
ページ6に含まれる内容の要旨
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not conforming File/Folder name: 64 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property/ AAC song file and folder names may not display correctly. information: 30 characters Playable Audio file • AAC, MP3, WMA • File/Folder name is the number o
ページ7に含まれる内容の要旨
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be u
ページ8に含まれる内容の要旨
General features ATT/DIM VOL Control knob Release button Q SRC Clock display LOUD indicator ATT indicator Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the bu
ページ9に含まれる内容の要旨
System Q Audio Control Selecting the best sound setting preset for 1 Select the source to adjust different types of music. Press the [SRC] button. 1 Select the source to set 2 Enter Audio Control mode Press the [SRC] button. Press the [VOL] knob. 2 Select the Sound type 3 Select the Audio item to adjust Press the [Q] button. Press the [VOL] knob. When you press the button once, the current Each time you press the knob, the item to be sound setting is displayed. adjusted alternates between the
ページ10に含まれる内容の要旨
General features Audio Setup Speaker Setting Setting the Sound system, such as Volume offset Fine-tuning so that the System Q value is optimal and Loudness. when setting the speaker type. 1 Select the source to adjust 1 Enter Standby Press the [SRC] button. Press the [SRC] button. Select the "STANDBY" display. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Audio Setup item to adjust Press the [VOL] knob. 3 Sel
ページ11に含まれる内容の要旨
Switching Display Changing the information displayed. • * If the contents of the information cannot be displayed, Play time is displayed. 1 Enter Switching Display mode • When you select the clock display, the display setting Press the Control knob for at least 1 second. of each source will be changed to the clock display. "DISP SEL" is displayed. • Album name cannot be displayed in WMA file. 2 Select the Display item Push the Control knob towards [4] or [¢]. In Tuner source (KDC-W534) D
ページ12に含まれる内容の要旨
General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in "CALL" is displayed. 1 Press the Release button. The audio system pauses. Drop open the faceplate. Listening to the audio during a call 2 Drawing the faceplate to left side pull it to Press the [SRC] button. forward and remove it. The "CALL" display disappe
ページ13に含まれる内容の要旨
Tuner features AUTO/AME Control knob 1-6 SRC Band display Frequency display ST indicator Preset station number Function of the KDC-W534Y Tuning Tuning Mode Selecting the station. Choose the tuning mode. 1 Select tuner source Press the [AUTO] button. Press the [SRC] button. Each time you press the button, the Tuning Select the "TUNER" display. mode alternates between the modes shown in 2 Select the band the table below. Push the Control knob towards [FM] or [AM]. Tuning mode Display Operation E
ページ14に含まれる内容の要旨
Tuner features Station Preset Memory Preset Tuning Putting a station in the memory. Recalling the stations in the memory. 1 Select the band 1 Select the band Push the Control knob towards [FM] or [AM]. Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory 2 Recall the station Push the Control knob towards [4] or Press the desired [1] — [6] button. [¢]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number
ページ15に含まれる内容の要旨
Function of the KDC-W534 RDS features TI Control knob 1-6 SRC RDS indicator TI indicator PTY indicator Receiving other traffic information stations Traffic Information Push the Control knob towards [4] or Changing to traffic information automatically [¢]. when a traffic bulletin starts even when you are not listening to the radio. • Traffic information can be switched when it is on the Press the [TI] button. Tuner Source. However, you cannot switch the Traffic Each time you press the button
ページ16に含まれる内容の要旨
Function of the KDC-W534 RDS features PTY (Program Type) Selecting the Program Type and searching for a • Speech and Music include the Program type shown station. below. Music: No.12 — 17, 26 — 30 1 Enter PTY mode Speech: No.3 — 11, 18 — 25, 31 Press the Control knob. • You can put the Program Type in the [1] — [6] button During PTY mode the "PTY" indicator is ON. memory and for quick recall. Refer to the (page 16). • You can change the display language. Refer to • Thi
ページ17に含まれる内容の要旨
Changing Language for PTY Function Selecting the Program Type display language. 1 Enter PTY mode Refer to (page 16). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Control knob towards [FM] or [AM]. Each time you push the knob, the language alternates between the languages shown in the table below. Language Display English "ENGLISH" French "FRENCH" German "GERMAN" 4 Exit Changing Language mode Press the [TI] button. | English 17
ページ18に含まれる内容の要旨
CD player features Control knob Release button SCAN RDM/ REP F.SEL SRC 3 Track number Play time IN indicator When a disc is inserted Playing CD & Audio file Press the [SRC] button. Select the "CD" display. When there is no disc inserted 1 Drop open the faceplate Pause and play Press the Release button. Press the Control knob. Each time you press the knob, the audio pauses 2 Insert a disc. or plays. 3 Push the faceplate on the left side, and return Eject the disc it to its former position. 1 D
ページ19に含まれる内容の要旨
Fast Forwarding and Reversing Track/File/Folder Repeat Replaying the song or Audio file folder you are Fast Forwarding listening to. Hold down toward [¢] with the Control Press the [REP] button. knob. Each time you press the button, the Repeat Play Release your finger to play the disc at that point. alternates between the modes shown in the Reversing tables below. Hold down toward [4] with the Control In CD source knob. Release your finger to play the disc at that point. Repeat play Display
ページ20に含まれる内容の要旨
CD player features Function of Audio file Text/Title Scroll Folder Select Scrolling the displayed CD text or Audio file text. Quickly selecting the folder you want to hear. Push the Control knob toward [FM] for at least 2 seconds. 1 Enter Folder Select mode Press the [F.SEL] button. "FOLD SEL" is displayed. • When the (page 22) is set to OFF, the display may black out while scrolling. During Select mode the folder information is displayed as shown below. Folder