KDC-X592 KDC-MP538U CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
ページ2に含まれる内容の要旨
Contents Before use 3 Basic Operations of remote control 20 Basic Operation 4 Appendix 22 General functions Accessories/ Installation Procedure 25 Tuner functions Disc & Audio file play functions Connecting Wires to Terminals 26 Function Control 6 Installation/Removing the Unit 27 ⁄ • Read through this page first for the setting of each function. Troubleshooting Guide 29 Display Settings 8 Specifications 31 About Display Type Text Display Selection Station/Disc Naming (SNPS/DNPS) Auxiliary Inp
ページ3に含まれる内容の要旨
Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • Characters that conform to ISO 8859-1 can be the unit. displayed. • In this document, the
ページ4に含まれる内容の要旨
Basic Operation [SRC] [ATT] [AUTO] [ ] [FNC] Release Disc slot AUX Auxiliary input Control knob [AUD] (Rear side) USB Terminal pressed during a call. General functions ⁄ Power/Source Select button [SRC] • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone Turns on the power. accessory. Refer to (page When the power is ON, select a source. 26). SRC Select mode 1: Press the [SRC] button and then turn
ページ5に含まれる内容の要旨
, : Indicates the button etc. to operate. Disc & Audio file play functions Subwoofer output Control knob Switches between ON (“SUBWOOFER ON”) and OFF Disc play Disc slot (“SUBWOOFER OFF”) each time pushing toward down for at least 2 seconds. Starts playing when a disc is inserted. When a CD is inserted, the “IN” indicator is ON. Function Control [FNC] ⁄ Pressing this button allows you to set various • 3 inch CD cannot be used. Attempt to insert using an functions using the Control k
ページ6に含まれる内容の要旨
Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page Sets/Resets security code MENU “Security Set”/ 1 sec. 13 “Security Clear” Sets the source selection method. “SRC Select” “1”*/ “2” 23 When set to “ON”, allows you to select music in the manner “iPod Mode” “OFF”/ “ON”* 11 similar to that of the iPod. Setting the operation check sound (beep sound) ON/OFF. “Beep” “OFF”/ “ON”* Sets the clock. “Clock
ページ7に含まれる内容の要旨
Category Item Setting Entry Setting overview Condition Page When set to “ON”, plays the music in the disc changer M.RDM “ON”/ — randomly. T.REP “ON”/ — When set to “ON”, plays the music repeatedly. When set to “ON”, plays the music on the disc repeatedly. D.REP “ON”/ — *Factory setting 1 Enter Function Control mode * Function of KDC-X592. Press the [FNC] button. Displayed item is depending on currently selected Function icon is displayed. source or mode. The mark in Condition column 2 Selec
ページ8に含まれる内容の要旨
Display Settings About Display Type Text Display Selection Shown below are examples of display types. Changing the text display. Display Display Type In Tuner source “TYPE [A]” 3 1 Information Display 1 Station name “SNPS” 1 Frequency “Frequency” “TYPE [B]” 1 Spectrum Analyzer & Clock “Speana/Clock” 1 Clock “Clock” 1 Date “Date” “TYPE [C]” 2 Blank “Blank” 3 1 1 In CD & External disc source “TYPE [D]” Information Display 2 1 Disc title “Disc Title” 1 Track title “Track Title” “TYPE [E]” Play time
ページ9に含まれる内容の要旨
In Auxiliary input source 1 Enter Text Display Selection mode (In Display Information Display Type A/ B/ C/ D/ F) Auxiliary input name “Source Name” Select “DISP” > “TEXT” . Spectrum Analyzer & Clock “Speana/Clock” For how to select Function Control item, refer to Clock “Clock” (page 6). Date “Date” 2 Select the text display part (Display Type A/ B/ Blank “Blank” C/ D only) Push the Control knob towards up or down. In HD Radio source (Optional) The selected text display
ページ10に含まれる内容の要旨
Display Settings Station/Disc Naming (SNPS/DNPS) Auxiliary Input Display Setting Attaching a title to a Station or CD. Selects the display below when changing to Auxiliary input source. 1 Receive/play the station/disc you want to attach a title to 1 Select Auxiliary input display setting item during Menu mode (In AUX mode) 2 Select Name set mode item during Menu Select the “Name Set” display. mode For how to select Function Control items, refer to Select the “Name Set” display.
ページ11に含まれる内容の要旨
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the Searchs the music by entering the track number. device or media being played now. 1 Enter the music number 1 Enter Music Select mode Press the number buttons on the remote Turn the Control knob. control. The music list is displayed. 2 Search the music 2 Search for music Press the [4] or [¢] button. Select the ca
ページ12に含まれる内容の要旨
Tuner Operation Function of remote control Station Preset Memory Direct Access Tuning Putting a station in the memory. Entering the frequency and tuning. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote 2 Enter Preset Memory mode control. Select “P.MEM” . “– – – –” is displayed. For how to select Function Control item, refer to (page 6). 2 Enter the frequency Pre
ページ13に含まれる内容の要旨
Other Functions Activating Security Code Deactivating Security Code To deactivate the Security Code function. ⁄ • You can set the Security Code with a 4 digit number of your 1 Select Security Code item during Menu choice. mode (In Standby mode) • The Security Code cannot be displayed or referenced. Make Select the “Security Clear” display. a note of the Security Code and treasure it up. For how to select Function Control items, refer to 1 Select Security Code item during Menu
ページ14に含まれる内容の要旨
Other Functions Function of KDC-X592 Manual Clock Adjustment When LX AMP unit connecting 1 Select Clock Adjustment item during Menu AMP Control mode (In Standby mode) You can control the LX AMP connected to the unit. Select the “Clock Adjust” display. For how to select Function Control items, refer to 1 Select AMP Control item during Menu mode (page 6). Select the “AMS Control” display. For how to select Function Control items, refer to 2 Enter Clock adjustment mode
ページ15に含まれる内容の要旨
Audio Adjustments Function of KDC-X592 Audio Control Adjusting the detail of Audio Control You can adjust following Audio Control items ; Among the Basic Audio items, you can adjust the Adjustment Item Display Range Bass level, Middle level, and Treble level in detail. Rear volume “REAR VOLUME” 0 — 35 Subwoofer level “SUB-W LEVEL” –15 — +15 Bass level System Q “NATURAL”/ Natural/User setting/Rock/ Adjustment Item Display Range “USER”/“ROCK”/ Pops/Easy/Top 40/Jazz Bass Center Frequency “BASS FR
ページ16に含まれる内容の要旨
Audio Adjustments Audio Setup Speaker Setting You can set Sound system , such as follows; Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Adjustment Item Display Range 1 1 Front High Pass Filter “HPF-F” Through/40* / 60* /80/100/ Speaker type Display 1 120/150/180/220* Hz OFF “OFF” 1 1 Rear High Pass Filter “HPF-R” Through/40* / 60* /80/100/ For 5 & 4 in. speaker “5/4inch” 1 120/150/180/220* Hz For 6 & 6x9 in. speaker “6x9/6inch” 1 1 Low Pass Filter “
ページ17に含まれる内容の要旨
Audio Preset Memory Audio Preset Recall Registering the value setup by Sound Control. The Recalling the sound setup registered by
ページ18に含まれる内容の要旨
Satellite Radio tuner control (Optional) Basic Operation Category and Channel Search Selecting the channel and category you want to Selecting Satellite Radio source receive. Press the [SRC] button. Select the “SAT”/ “SIRIUS”/ “XM” display. 1 Enter Category and Channel Search mode For how to select source item, refer to of (page 2 Select the Category 4). Push the Control knob towards up or down. ⁄ 3 Select the Channel • You
ページ19に含まれる内容の要旨
Preset Memory Putting the channel in the memory. 1 Select the channel to put in the memory Push the Control knob towards right or left. 2 Enter Preset Memory mode Select “P.MEM” . For how to select Function Control item, refer to (page 6). 3 Select the number to put in the memory Turn the Control knob. 4 Determine the number to put in the memory Press the Control knob. 5 Allow the determined number to take effect Press the Control knob. Cancelling the Preset Memory mode Pres
ページ20に含まれる内容の要旨
Basic Operations of remote control In Tuner/HD Radio source SRC VOL SRC ATT Band select [FM]/[AM] ATT VOL AUD AUD Station select [4]/[¢] FM/AM Recall preset stations [1] — [6] DIRECT 2-ZONE (page 12, 18) In CD/USB source 0 — 9 Music select [4]/[¢] Folder/Disc select [FM]/[AM] Pause/Play [38] In Satellite Radio tuner source General control Preset band select [FM] Volume control [VOL] Channel select [4]/[¢] Source select [SRC] Recall preset channels [1] — [6] Volume reduce
