KDC-M9021SE_U.S 03.1.17 3:15 PM Page 2 Contents Dimmer Safety precautions......................3 CD/MP3/WMA/External disc OFF Wait Time Setting About RDS ..................................5 control features .....................23 System Q Playing CD & MP3/WMA Notes on playing MP3/WMA.......6 Built-in Amp Mute Setting Playing External Disc About CDs...................................8 Fast Forwarding and Reversing Dual Zone System General features .........................9 Track Search B.M.S
ページ3に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:15 PM Page 3 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About CD players/disc changers To prevent injury and/or fire, take the To prevent damage to the machine, connected to this unit following precautions: take the following precautions: KENWOOD disc changers/ CD players • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative released in 1998 or later can be connected to locked in place. Otherwise it may fly out o
ページ4に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:16 PM Page 4 Safety precautions • The illustrations of the display and the panel Cleaning the Faceplate Terminals NOTE appearing in this manual are examples used If the terminals on the unit or faceplate get • If you experience problems during to explain more clearly how the controls are dirty, wipe them with a dry, soft cloth. installation, consult your Kenwood dealer. used. Therefore, what appears on the display in the illustrations may differ from what • If the un
ページ5に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:16 PM Page 5 About RDS The marking of products using lasers RDS (Radio Data System) When listening to an RDS station, the program (Except for some areas) service name of the station is displayed, advising you quickly which station is being CLASS 1 received. LASER PRODUCT RDS (Radio Data System) stations also transmit alternative frequency data for the The label is attached to the chassis/case and same station. When you are making long trips, says that the component
ページ6に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:16 PM Page 6 Notes on playing MP3/WMA(KDC-PSW9521)/ MP3(KDC-M9021SE/KDC-M9021) This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3)/WMA. Note, Entering ID3 tag and Contents however, that the MP3/WMA recording media and formats Description acceptable are limited. When writing MP3/WMA, pay attention to The Displayable ID3 tag is ID3 version the following restrictions. 1.x. For the character code, refer to the List Acceptable media of Codes. The MP3/WMA recording media a
ページ7に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:16 PM Page 7 When a Track Search is executed with file ¡$ being played ... MP3/WMA playing order When selected for play, Album Search, Track Search, or for Album Operation of the button Current Select, files and folders are accessed in the order in which they were file number 4 Button ¢ Button written by the CD writer. Because of this, the order in which they are expected to be played Beginning of file may not match the order in which they are actually played. You
ページ8に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:16 PM Page 8 About CDs Handling CDs CD cleaning • Don’t touch the recording surface of the CD. Clean from the center of the disc and move outward. Removing CDs When removing CDs from this unit pull them • CD-R and CD-RW are easier to damage than out horizontally. a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. CDs that can’t be used • Don’t stick tape etc. on the CD. • CDs that aren’t round can’t be used. Also, don’t use a
ページ9に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 9 General features Power AM/ VOL NF FM Turning ON the Power Turn the vehicle ignition ON. The faceplate reverses and control panel is displayed. Turning OFF the Power Turn the vehicle ignition OFF. When the set time for removing the faceplate (page 16) lapses, the faceplate reverses and the control panel is hidden. Do not apply force to the faceplate during operation. It can cause damage. SRC MENU Q/ ANG The first time the unit is used it is necessary to c
ページ10に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 10 General features Sound setting Display Selecting the Source Flat "FLAT" Press the [SRC] button. User memory "User Preset" Source required Display Rock "ROCK" Tuner "TUNER" Pops "POPS" CD "COMPACT DISC"/"CD" Easy "EASY" External disc "DISC-CH"/"DISC" Top 40 "TOP 40" Auxiliary input "AUX" Jazz "JAZZ" Standby (Illumination only mode) "ALL OFF" • User memory: The values set on the
ページ11に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 11 • Loudness: Compensating for low and high tones during low Adjustment Item Display Range volume. Bass Center Frequency "Bass FRQ" 60/70/80/100 or 150 Hz (KDC-PSW9521) The graphic is displayed when Bass level "Bass" –8 — +8 Loudness is ON, and is switched OFF when Loudness Bass Q Factor "Bass Q" 1.00/1.25/1.50/2.00 is OFF. Bass Extend "Bass EXT" ON/OFF •* :Function of the KDC-PSW9521/ KDC-M9021SE/ KDC-M9021 Middle Center "MID FRQ" 0.5/1.0/1.5/2.0 kHz 5 E
ページ12に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 12 General features Function of the KDC-PSW9521/KDC-M9021SE/KDC-M9021 In Woofer setting mode Woofer type Display Speaker & Woofer Setting OFF "Woofer OFF" Speaker setting allows the System Q settings to be fine-tuned 12 in. A type "12in type A" according to the type of speakers. 10 in. A type "10in type A" Woofer setting allows for Network configuration according to the 12 in. B type "12in type B" type of subwoofers. 10 in. B type "10in type B" 1 Enter Sta
ページ13に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 13 Speaker type Display 5 Exit Display Control mode Press the [MENU] button. OFF "OFF" For 5 & 4 in. speaker "5/4inch" Full Screen display can be selected when "Display Type C" is selected in (page 32). For 6 & 6x9 in. speaker "6 9/6 inch" * For the OEM speaker "O.E.M." 4 Exit Speaker Setting mode Press the [Q] button. Switching the Standby Display Switching the information displayed in Standby. Switching Full Screen Display 1 Ente
ページ14に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 14 General features Switching Upper and Lower Part Display In Tuner source Switching the upper and lower part display. Upper Part Display 1 Enter Menu mode Information Display Press the [MENU] button for at least 1 second. Program Service name or Frequency "BAND+ch+PS" "MENU" is displayed. Radio text "R-TEXT" 2 Select Display Control mode Lower Part Display Press the [FM] or [AM] button. Information Display Select the "Display Mode Select"/"Disp Mode Selec
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 16 General features Theft Deterrent Faceplate Hiding the Control Panel The faceplate of the unit can be detached and taken with you, Prevents tampering with the unit while your car is being serviced helping to deter theft. etc. Removing the Faceplate Hiding the control panel Press the [SRC] button for at least 1 second. 1 Turn the ignition OFF or press the [SRC] button for at least 1 The faceplate slides open. second. When the time set in
ページ17に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 17 Tuner features Tuning AM FM Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. #4/8 SRC #1/5 #2/6 #3/7 ¢ 3 Tune up or down band 4 P.M MENU Press the [4] or [¢] button. During reception of stereo stations the "ST" indicator is ON. KDC-PSW9521 Frequency display Preset station n
ページ18に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 18 Tuner features 4 Select the preset number Direct Access Tuning (Function of remote) Press the [FM] or [AM] button. Entering the frequency and tuning. 5 Put the frequency in the memory 1 Select the band Press the [P.M] button for at least 2 seconds. Press the [FM] or [AM] button. The preset number display blinks 1 time. 2 Enter Direct Access Tuning mode 6 Repeating steps 3 to 5 and putting the desired broadcast Press the [DIRECT] button on the remote. st
ページ19に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:18 PM Page 19 •When the (page 35) is ON, only RDS stations are SNPP (Station Name Preset Play) put in the memory. (Function of Remote) • When Auto Memory Entry is done with the FM2 band, the RDS stations preset in the FM1 band aren't put in the memory. Displaying the program service name and selecting the station. Likewise, when it is done with the FM3 band, RDS stations preset 1 Enter SNPP mode in FM1 or FM2 aren't put in the memory. 8 stations can be
ページ20に含まれる内容の要旨
KDC-M9021SE_U.S 03.1.17 3:18 PM Page 20 RDS features Traffic Information FM AM Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Press the [TI] button. Each time the button is pressed the Traffic Information function turns ON or OFF. When it's ON, "TI" indicator is ON. When a traffic information station isn't being received the "TI" indicator blinks. When a traffic bulletin starts, "Traffic Info" is displayed it and it s
