ページ1に含まれる内容の要旨
KDC-HD548U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from
your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the
space provided below. Refer to
ページ2に含まれる内容の要旨
Safety CONTENTS Safety 2 WARNING Stop the car before operating the unit. Preparation 3 Important to know... How to attach/detach the faceplate To prevent a short circuit, never put or How to reset your unit leave any metallic objects (such as coins or How to prepare the remote controller metal tools) inside the unit. (RC-405) Caution: Adjust the volume so that you Basic operations 4 can hear sounds outside the car. Driving with the volume too high may cause an Getting started 6 accide
ページ3に含まれる内容の要旨
Preparation How to attach/detach the faceplate How to prepare the remote controller (RC-405) When you use the remote controller for the 1 first time, pull out the insulation sheet. 1 2 Insulation sheet 2 Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the If the effectiveness of the remote possibility of water splashing. controller decreases, replace the battery. Keep the faceplate in its casing while detached. 3 The
ページ4に含まれる内容の要旨
Basic operations Loading slot Remote sensor Do not expose to bright sunlight. Ejects the disc Volume knob Display window Detaches the faceplate USB terminal Auxiliary input jack The following indicator lights up when... ATT (blink) : The sound attenuates. (Applicable only when using the remote controller, RC-405). ST : A stereo broadcast is received. HD : HD Radio™ broadcast is tuned in. D : HD Radio digital broadcast is tuned in. MC : HD Radio multicast broadcast is tuned in. EQ : [SYSTEM Q]
ページ5に含まれる内容の要旨
When you press or hold the following button(s)... Remote Main unit General operation controller Turns on. — Turns off if pressed and held. Selects the available sources (HD RADIO, USB or iPod, CD, AUX, SRC STANDBY), if the power is turned on. SRC • If the source is ready, playback also starts. “iPod” or “CD” is selectable only when an iPod is connected or a disc is loaded. VOL Adjusts the volume level. Volume knob (turn) 5 / ∞ Selects items. ENT Confirms selection. Volume knob (press) —
ページ6に含まれる内容の要旨
Getting started Canceling the display Adjusting the clock demonstration 1 Press the volume knob to enter [FUNCTION] mode. The display demonstration is always turned 2 Turn the volume knob to select on unless you cancel it. [SETTINGS], then press to enter. When you turn on the power (or after you 3 Turn the volume knob to select [CLOCK], reset the unit), the display shows: then press to enter. [CANCEL DEMO] \ [PRESS] \ 4 Turn the volume knob to select [VOLUME KNOB] [CLOCK ADJUST], then pr
ページ7に含まれる内容の要旨
Item Selectable setting (Preset: *) CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No sound can be heard if an audio file disc is played. SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance. F/W UP xx.xx YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/ Listening to HD Radio™ Broadcasts Hold
ページ8に含まれる内容の要旨
iTunes Tagging When you hear a song you enjoy on your local HD Radio station, you can tag the song and save the song’s information on this unit. Up to 50 TAGs (song’s information) can be registered to this unit. By using this tagging function, you can easily purchase the songs from Apple iTunes Store. Hold to enter HD Radio tagging mode and tag the song. “TAG” will be indicated on the display when the song information can be registered. To transfer the tagged songs to your iPod and purchase
ページ9に含まれる内容の要旨
Listening to a disc/ USB device/ iPod Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.) Press to select track/file. USB terminal Hold to fast-forwards/reverses. Slide open the cover. Press to select next folder. Start playing a disc Connecting a USB 1 Press SRC to turn on the power. device 2 Insert a disc into the loading slot. Playback starts automatically. 3 Press number button 6 ( ) to CA-U1EX resume/pause playback (if necessary). (optional accessory) USB device (comme
ページ10に含まれる内容の要旨
Selecting Repeat Play < or > on the display indicates that preceded/next item is available. Press number button 4 (REP) repeatedly For USB device * and iPod: To skip search, to make a selection. press 4 / ¢. Audio CD : TRACK REPEAT, REPEAT OFF * This operation is effective only for the files AAC/MP3/WMA : FILE REPEAT, registered in the database created with FOLDER REPEAT, REPEAT OFF Kenwood Music Editor. (page 16) iPod : FILE REPEAT, REPEAT OFF To return to the top menu while in the s
ページ11に含まれる内容の要旨
4 Turn the volume knob to select the Deleting a song on the playlist character to be searched for. 1 Press number button 5 (MEMO MY LIST) 5 Press 4 / ¢ to move to the entry to display the playlist. position. “MY PLAYLIST” appears. You can enter up to three characters. 2 Turn the volume knob to select the song 6 Press the volume knob to start you want to delete, then press and hold searching. the volume knob. To cancel the Alphabet Search mode, press 3 Turn the volume knob to select and
ページ12に含まれる内容の要旨
Listening to the other external components Preparation : Make sure [ON1] or [ON2] is selected for [BUILT-IN AUX]. (page 6) 1 Press SRC to select “AUX.” Auxiliary input jack 2 Turn on the external component and start playing. 3 Turn the volume knob to adjust the volume. 3.5 mm (3/16") stereo mini plug (commercially available) Portable audio device (commercially available) Function settings 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [AUDIO CONTROL] or [
ページ13に含まれる内容の要旨
Item Selectable setting (Preset: *) BASS LEVEL –8 — +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before making an adjustment, select the source you want to adjust.) MID LEVEL TRE LEVEL BALANCE L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance. FADER R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance. SUBWOOFER SET ON *: Turns on the subwoofer output. ; OFF: Cancels. DETAILED SET LPF SUBWOOFER: THROUGH *: All sign
ページ14に含まれる内容の要旨
Troubleshooting Symptom Remedy/Cause Sound cannot be heard. Adjust the volume to the optimum level. / Check the cords and connections. “PROTECT” appears and no operations can Check to be sure the terminals of the speaker leads are covered with insulating be done. tape properly, then reset the unit. If “PROTECT” does not disappear, consult your nearest service center. The unit does not work at all. Reset the unit. Radio reception is poor. / Static noise while Connect the antenna firmly. / Pull
ページ15に含まれる内容の要旨
Symptom Remedy/Cause “READING” keeps flashing. Longer readout time is required. Do not use too many hierarchies and folders. Elapsed playing time is not correct. This is caused by how the tracks are recorded. The number of songs contained in “SONGS” Podcast files are not counted in this unit as this unit does not support the category of this unit is different from that playback of podcast files. contained in “SONGS” category of iPod. Correct characters are not displayed (e.g. This unit can only
ページ16に含まれる内容の要旨
About Audio file Playable Audio file: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) Playable disc media: CD-R/RW/ROM Playable disc file format: ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Playable USB device file system: FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. About USB device This unit can play AAC/MP3/WMA files stored on a USB mass storage class device. Install t
ページ17に含まれる内容の要旨
Specifications FM tuner section USB interface Frequency range (200 kHz space): USB standard: USB1.1/ 2.0 (Full speed) 87.9 MHz — 107.9 MHz Maximum supply current: 500 mA Usable sensitivity (S/N = 26 dB): File system: FAT16/ 32 11.2 dBf (1.0 μV/75 Ω) AAC decode: AAC-LC “.m4a” files Quieting sensitivity (DIN S/N = 46 dB): MP3 decode: Compliant with MPEG-1/2 Audio 19.2 dBf (2.5 μV/75 Ω) Layer-3 Frequency response (±3 dB): 30 Hz — 15 kHz WMA decode: Compliant with Windows Signal-to-Nois
ページ18に含まれる内容の要旨
Sécurité TABLE DES AVERTISSEMENT MATIERES Arrêtez la voiture avant de manipuler l’appareil. Sécurité 2 Important... Pour éviter les courts-circuits, ne jamais Préparation 3 mettre ou laisser d’objets métalliques Comment attacher/détacher la façade (comme une pièce de monnaie ou un outil Comment réinitialiser votre appareil en métal) à l’intérieur de l’appareil. Comment préparer la télécommande Attention: Ajustez le volume de façon à (RC-405) pouvoir entendre les sons extérieurs à la
ページ19に含まれる内容の要旨
Préparation Comment attacher/détacher la Comment préparer la façade télécommande (RC-405) Lorsque vous utilisez la télécommande pour la première fois, tirez sur la feuille isolante 1 pour la retirer. 1 Feuille isolante 2 2 N’exposez pas la façade à la lumière directe du soleil, à trop de chaleur ou d’humidité. Si la télécommande perd de son Évitez également les endroits trop efficacité, remplacez la pile. poussiéreux ou exposés aux éclaboussures. Conserver la façade dans son étui lor
ページ20に含まれる内容の要旨
Fonctionnement basique Fente d’insertion Capteur de télécommande NE l’exposez PAS à la lumière directe du soleil. Éjection d’un disque Bouton de volume Fenêtre d’affichage Détacher la façade Borne USB Prise d’entrée auxiliaire L’indicateur suivant s’allume quand... ATT (clignote) : Le son est atténué. (Applicable uniquement en utilisant la télécommande, RC-405). ST : Une émission stéréo est reçue. HD : Une station HD Radio™ est accordée. D : Une station HD Radio numérique est accordée. MC : Un
