Contents Before use 3 Audio Adjustments 19 Audio Control Basic Operation 4 Audio Setup General functions Speaker Setting Tuner functions Audio Preset Memory Disc & Audio file play functions Audio Preset Recall Function Control 6 Bluetooth Setup 22 Registering Bluetooth device ⁄ • Read through this page first for the setting of each Registering Special Bluetooth device function. Registering PIN Code Downloading the Phone Book Display Settings 8 Selecting the Bluetooth device You Wish to About
ページ3に含まれる内容の要旨
Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • Characters that conform to GB2312 or ISO 8859-1 the unit. can be displayed. Refer to “MENU
ページ4に含まれる内容の要旨
Basic Operation [SRC] [ATT] [AUTO] [ ] [FNC] Release Disc slot AUX Auxiliary input Control knob [AUD] (Rear side) USB Terminal General functions Faceplate release Release Releases the faceplate lock so that it can be removed. Power/Source Select button [SRC] Refer to the following diagram when reattaching the Turns on the power. faceplate. When the power is ON, select a source. SRC Select mode 1: Press the [SRC] button and then turn the Control knob or push it toward left or right. To de
ページ5に含まれる内容の要旨
, : Indicates the button etc. to operate. Disc & Audio file play functions Function Control [FNC] Pressing this button allows you to set various functions using the Control knob. Refer to (page 6). Starts playing when a disc is inserted. Category Function of setup item When a CD is inserted, the “IN” indicator is ON. MENU Allows you to set up the environment. ⁄ DISP Allows you to set up the display. • 3 inch (8 cm) CD cannot be used. Attempt to inse
ページ6に含まれる内容の要旨
Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page Sets security code MENU “Security Set” 1 sec. 17 “SRC Select” “1”*/ “2” Sets the source selection method. 31 When set to “ON”, allows you to select music in the manner “iPod Mode” “OFF”/ “ON”* 11 similar to that of the iPod. Register a Bluetooth device (pairing). “Device Regist” 1 sec. 22 Allow registration of a special device that cannot be “SPC
ページ7に含まれる内容の要旨
Category Item Setting Entry Setting overview Condition Page Sets the display pattern. DISP > TYPE A/ B/ C/ D/ E/ F/ G —8 Sets the Type E spectrum analyzer display. > GRAPH Spectrum Analyzer ‰ 1 – 2 Sets the Type A side icon display. > SIDE Text icon/ Source Å icon Sets the text display. > TEXT ÅıÇ 9 ÎÏ BT > V-REC Make a voice dialing call. 15 Register a name tag for voice recognition. > VOICE > 25 NAME Register a type (category) voice tag for voice recognition. > VOICE > 25 TYPE Download a shor
ページ8に含まれる内容の要旨
Display Settings Function Control 1 Enter Function Control mode About Display Type Press the [FNC] button. Shown below are examples of display types. Function icon is displayed. Display Display Type Chinese display 2 Select your desired setup item “TYPE [A]” 3 1 3 1 1 Operation type Operation 1 1 Movement between items Turn the Control knob. Selection of item Press the Control knob. “TYPE [B]” 1 1 1 Return to previous item Press the [FNC] button or “ ” icon. 1 1 Repeat selection and determinati
ページ9に含まれる内容の要旨
In Bluetooth audio source Text Display Selection Information Display Changing the text display. Bluetooth audio “Source Name” Spectrum Analyzer & Clock “Speana/Clock” In Tuner source Clock “Clock” Information Display Date “Date” Station name “SNPS” Blank “Blank” Frequency “Frequency” Spectrum Analyzer & Clock “Speana/Clock” 1 Enter Text Display Selection mode (In Display Clock “Clock” Type A/ B/ C/ D/ F) Date “Date” Select “DISP” > “TEXT” . Blank “Blank” For how to select Function Control item
ページ10に含まれる内容の要旨
Display Settings Station/Disc Naming (SNPS/DNPS) Auxiliary Input Display Setting Attaching a title to a Station or CD. Selects the display below when changing to Auxiliary input source. 1 Receive/play the station/disc you want to attach a title to 1 Select Auxiliary input display setting item during Menu mode (In AUX mode) 2 Select Name set mode item during Menu Select the “Name Set” display. mode For how to select Function Control items, refer to Select the “Name Set” display.
ページ11に含まれる内容の要旨
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the Searchs the music by entering the track number. device or media being played now. 1 Enter the music number 1 Enter Music Select mode Press the number buttons on the remote Turn the Control knob. control. The music list is displayed. 2 Search the music 2 Search for music Press the [4] or [¢] button. Select the ca
ページ12に含まれる内容の要旨
Tuner Operation Function of remote control Station Preset Memory Direct Access Tuning Putting a station in the memory. Entering the frequency and tuning. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote 2 Enter Preset Memory mode control. Select “P.MEM” . “– – – –” is displayed. For how to select Function Control item, refer to (page 6). 2 Enter the frequency Pre
ページ13に含まれる内容の要旨
Operation of hands-free phoning Before Use Call waiting • For details on the Bluetooth cell-phone with the Answering Another Incoming Call with the hands-free function, see Current Call Suspended (page 31). 1 Press the [AUD] knob. • You need to register your cell-phone before using it with this unit. For more details, see (page 22). or down. Select the “Answer” display. • If you have registe
ページ14に含まれる内容の要旨
Operation of hands-free phoning Making a call 5 Press the Control knob. 6 Press the [FNC] button. 1 Enter dialing method mode 7 Make a call Press the [ATT] button for at least 1 second. Press the Control knob for at least 1 second. 2 Select a dialing method ⁄ Press the Control knob. • You need to register the preset dial number. (page 15) "DIAL" » "INITIAL" » "P-BOOK" » "OUT-CALL" » "IN- CALL" » "MIS-CALL" Methods of operations in the above modes are described below. Calling a number in the Pho
ページ15に含まれる内容の要旨
Calling a number in the call log Registering to the Preset Dial Number List 1 Enter dialing method mode Press the [ATT] button for at least 1 second. 1 Enter the phone number you wish to register Enter the phone number with reference to the 2 Select the call log mode following: Press the Control knob. Dial a number/ Calling a number in the call log/ Select the "OUT-CALL" (outgoing call), "IN-CALL" Calling a number in the Phone Book (incoming call), or "MIS-CALL" (missed call) display. 2 Ente
ページ16に含まれる内容の要旨
Bluetooth Audio Operation Before Use • For details on the Bluetooth Audio player which can be connected, see (page 31). • You need to register your Bluetooth Audio player before using it with this unit. For more details, see (page 22). • You to select the Bluetooth audio player you wish to connect. Refer to (page 24). Basic Operation Selecting Bluetooth Audio source Press
ページ17に含まれる内容の要旨
Other Functions Entering Security Code Security Code The Security Code is required to use the audio unit When Security Code is set, possibility of theft when the unit is first used after removed from the is reduced because input of Security Code is battery power source or the Reset button is pressed. prompted to turn on the unit once it is turned off. 1 Turn the power ON. ⁄ 2 Do the step 3 through 4 operation, and reenter • When you activate the Security Code function, it cannot be the sec
ページ18に含まれる内容の要旨
Other Functions Manual Clock Adjustment Demonstration mode setting Turning the demonstration mode ON/OFF. 1 Select Clock Adjustment item during Menu mode (In Standby mode) 1 Select Demonstration item during Menu mode Select the “Clock Adjust” display. Select the “DEMO Mode” display. For how to select Function Control items, refer to For how to select Function Control items, refer to (page 6). (page 6). 2 Enter Clock adjustment mode 2 Set the Demonstratio
ページ19に含まれる内容の要旨
Audio Adjustments Audio Control Audio Setup You can adjust following Audio Control items ; You can set Sound system , such as follows; Adjustment Item Display Range Adjustment Item Display Range Rear volume “REAR VOLUME” 0 — 35 Front High Pass Filter “HPF-F” Through/40/ 60/80/100/120 /150/180/220 Hz Subwoofer level “SUB-W LEVEL” –15 — +15 Rear High Pass Filter “HPF-R” Through/40/ 60/80/100/120 System Q “USER”/“ROCK”/ User setting/Rock/Pops/Easy/ /150/180/220 Hz “POPS”/“EASY”/ Top 40/Jazz/Natural
ページ20に含まれる内容の要旨
Audio Adjustments Speaker Setting Audio Preset Memory Fine-tuning so that the System Q value is optimal Registering the value setup by Sound Control. The when setting the speaker type as follows; memory cannot be erased by the Reset button. Speaker type Display 1 Setup Sound Control OFF “OFF” Refer to the following operations to setup the For 5 & 4 in. speaker “5/4inch” Sound Control. For 6 & 6x9 in. speaker “6x9/6inch” -