ページ1に含まれる内容の要旨
DUAL DIN SIZED CD RECEIVER
DPX503U
DPX303
DPX313
INSTRUCTION MANUAL
Declaration of Conformity with regard to the EMC Directive
2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
© B64-4227-00/00 (EW/ E2W)
ページ2に含まれる内容の要旨
Contents Before use 3 Audio Adjustments 19 Cabin selection Basic Operation 4 DTA (Digital Time Alignment) setting General functions X’Over setting Tuner functions Equalizer Control Disc & Audio file play functions Preset position selection Manual position setting Function Control 6 Audio Preset Memory Audio Preset Recall Display Settings 9 Audio Control About Display Type Audio Setup Text Display Selection Speaker Setting Illumination Color Selection Audio Preset Memory Illumination Color Preset
ページ3に含まれる内容の要旨
Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • Characters that conform to ISO 8859-5 or ISO 8859- the unit. 1 can be displayed. Refer to “
ページ4に含まれる内容の要旨
Basic Operation [ ] Disc slot [SRC] [FNC] [TI] Control knob [1]—[6] USB Terminal Auxiliary input [AUD] [ATT] (DPX503U only) The audio system comes back on when [SRC] is General functions pressed during a call. Power/Source Select button : [SRC] ⁄ Turns on the power. • To use the TEL Mute feature, you need to hook up the MUTE When the power is ON, select a source. wire to your telephone using a commercial telephone SRC Select mode 1: Press the [SRC] button and then accessory. Refer to
ページ5に含まれる内容の要旨
Pause and play : Control knob Tuner functions Switches between pause and play each time the Band select : Control knob center is pressed. Switches between FM1, FM2, and FM3 each time USB device removing (DPX503U only) : [0] pushing toward up. Press this button for 2 seconds or longer to select the Switches to AM when pushing toward down. remove mode, and the remove the USB device. Tuning : Control knob During the remove mode, the “USB REMOVE” Changes the frequency when pushing toward left o
ページ6に含まれる内容の要旨
Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page MENU “Security Set”/ 1 sec. Sets/Resets security code 17 “Security Clear” Sets the source selection method. “SRC Select” “1”*/ “2” 27 1 When set to “ON”, allows you to select music in the manner “iPod Mode”* “OFF”/ “ON”* 13 similar to that of the iPod. 1 When the iPod source is used, sets whether the illumination “AT COL CHG”* “OFF”/ “iPod”* 28
ページ7に含まれる内容の要旨
Category Item Setting Entry Setting overview Condition Page 3 “Russian”* “OFF”/ “ON”* Selects Russian as the display language. 28 “Scroll” “Auto”/ “Manual”* When set to “Auto”, scrolls the screen once with the change — of the displayed text. Sets whether to display AUX during source selection. “Built in AUX” “OFF”/ “ON”* Turns off the power when the preset time has lapsed in the “Power OFF” “-----”/ “20min”*/ 28 Standby mode. “40min”/ “60min” “CD Read” “1”*/ “2” Sets the CD read mode. 28 2 Pres
ページ8に含まれる内容の要旨
Function Control Displayed item is depending on currently selected 1 Enter Function Control mode source or mode. The mark in Condition column shows Press the [FNC] button. the condition to which the item is displayed. Function icon is displayed. : Can be set in other than standby state. 2 Select your desired setup item : Can be set in standby state. : Can be set while Audio file source of CD/USB/iPod. Operation type Operation : Can be set while Audio file source of CD/USB Movement bet
ページ9に含まれる内容の要旨
Display Settings In Audio file source About Display Type Information Display Shown below are examples of display types. Music title & Artist name “Title/Artist”/”TITLE” Display Display Type Album name & Artist name “Album/Artist”/”ALBUM” “TYPE [A]” Folder name “Folder Name”/”FOLDER” 3 1 File name “File Name”/”FILE” Play time & Music number “P-Time”/”P-TIME” “TYPE [B]” Spectrum Analyzer & Clock “Speana/Clock”/”SPEANA” 2 Date “Date”/”DATE” 3 1 Blank “Blank”/”BLANK” “TYPE [C]” In Standby 1 Informa
ページ10に含まれる内容の要旨
Display Settings Function of DPX503U Function of DPX503U Illumination Color Selection Illumination Color Preset Memory Selecting the Illumination Color of the panel. Saving the combination of the Illumination Colors selected for each place. The memory cannot be 1 Enter Illumination Color Selection mode erased by the Reset button. Select “Color” . For how to select Function Control item, refer to 1 Set the Illumination Color for each place (page 6). Refer to
ページ11に含まれる内容の要旨
Function of DPX503U Disc Naming (DNPS) Illumination Color Preset Recall Attaching a title to a CD. Recalling the selection you saved in Illumination 1 Play the disc you want to attach a name to Color Preset mode. 2 Select Name set mode item during Menu 1 Enter Audio Preset Recall mode mode Select “COLOR” > “PRESET” > “RECALL” . Select the “Name Set” display. For how to select Function Control item, refer to For how to select Function Control items, refer to (page 6).
ページ12に含まれる内容の要旨
Display Settings Auxiliary Input Display Setting Opening message edit Selects the display below when changing to Setting the opening message to be displayed when Auxiliary input source. the power is turned on. 1 Select Auxiliary input display setting item 1 Select Opening message edit item during during Menu mode (In AUX mode) Menu mode Select the “Name Set” display. Select “OPENING MSGE Edit”. For how to select Function Control items, refer to For how to select Function Control items, refer
ページ13に含まれる内容の要旨
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the Searchs the music by entering the track number. device or media being played now. 1 Enter the music number 1 Enter Music Select mode Press the number buttons on the remote Turn the Control knob. control. The music list is displayed. 2 Search the music 2 Search for music Press the [4] or [¢] button. Select the ca
ページ14に含まれる内容の要旨
Music disc/Audio file Operation Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. Select the “CD Changer” display. For how to select source item, refer to of (page 4). Music search Push the Control knob towards right or left. Disc Search Push the Control knob towards up or down. Playing the Current Song or Disc Repeatedly. (Repeat play) Press the [4] button. Pressing the button repeatedly selects Trac
ページ15に含まれる内容の要旨
Tuner Operation Function of remote control Station Preset Memory Direct Access Tuning Putting a station in the memory. Entering the frequency and tuning. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote 2 Enter Preset Memory mode control. Select “P.MEM” . “– – – –” is displayed. For how to select Function Control item, refer to (page 6). 2 Enter the frequency Pre
ページ16に含まれる内容の要旨
Tuner Operation PTY (Program Type) Program Type preset Selecting the Program Type below and searching Putting the Program Type in the Preset button for a station; memory and quick recall. Program Type Display Program Type Display Presetting the Program Type Speech “All Speech” Weather “Weather & 1 Select the Program Type to preset Metr” Music “All Music” Refer to (page 16). Finance “Finance” News “News” Children’s “Children's Current Affairs “Current Affairs” 2 Enter Prog
ページ17に含まれる内容の要旨
Other Functions Activating Security Code Deactivating Security Code To deactivate the Security Code function. ⁄ • You can set the Security Code with a 4 digit number of your 1 Select Security Code item during Menu choice. mode (In Standby mode) • The Security Code cannot be displayed or referenced. Make Select the “Security Clear” display. a note of the Security Code and treasure it up. For how to select Function Control items, refer to 1 Select Security Code item during Menu
ページ18に含まれる内容の要旨
Other Functions Manual Clock Adjustment Demonstration mode setting Turning the demonstration mode ON/OFF. 1 Select Clock Adjustment item during Menu mode 1 Select Demonstration item during Menu mode Select the “Clock Adjust” display. Select the “DEMO Mode” display. For how to select Function Control items, refer to For how to select Function Control items, refer to (page 6). (page 6). 2 Enter Clock adjustment mode 2 Set the Demonstration mode Press the Co
ページ19に含まれる内容の要旨
Audio Adjustments Function of DPX503U Function of DPX503U Cabin selection DTA (Digital Time Alignment) setting You can compensate the delay of the sound arrival Adjusting fine tuning of the speaker position time, which is caused by the installation position of compensation value specified at the speakers, by selecting your environment from (page 19). the following car types; 1 Enter DTA setting mode Car type (rear speaker position) Display Select “SOUND” > “S-SET” > “DTA” . N
ページ20に含まれる内容の要旨
Audio Adjustments Function of DPX503U 2 Select the item you want to set X’Over setting Turn the Control knob and push the center when the desired item is displayed. You can set a X’Over value for the speakers; 3 Set the value Adjustment Item Display Range Turn the Control knob. Front High Pass Filter “HPF-Front” Through/40/60/80/100/120/ 4 Exit Equalizer Control mode 150/180/220 Hz Press the [FNC] button. Rear High Pass Filter “HPF-Rear” Through/40/60/80/100/120/ 150/180/220 Hz Low Pass Filte
