ページ1に含まれる内容の要旨
DOUBLE DIN SIZED CD/CASSETTE RECEIVER
DPX-6030
INSTRUCTION MANUAL
DPX-6020
© PRINTED IN JAPAN B64-2004-10 (M) (+)
03/ 2 1 02/12 11 10 9 8 7 6 5 4 3 2
ページ2に含まれる内容の要旨
Contents Disc Name Preset Play (DNPP)..................................................................21 Safety precautions..........................................................3 Presetting Disc Names ..............................................................................22 Handling Compact discs .................................................5 DSP features.................................................................23 General operations DSP (Digital Signal Processor) .........
ページ3に含まれる内容の要旨
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer to be To prevent injury or fire, take the To prevent damage to the machine, connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" switch to this unit, set the "O-N" switch to • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative "N". locked in place. Otherwise it may fall out of 12V DC power supply. When you connect a m
ページ4に含まれる内容の要旨
Safety precautions volatile liquid such as thinner or alcohol may • Remove a cassette tape from the unit when NOTE scratch the surface or erases characters. not listening to it for a while. If you leave a tape in the unit too long, it may stick to the • CD-Rs and CD-RWs which have not tape head and cause unit malfunction. undergone finalization processing cannot be The marking of products using lasers played. (For more information on finalization (Except for some areas) processing, refer to the
ページ5に含まれる内容の要旨
Handling Compact discs Playing a CD that is dirty, scratched Storing CDs Checking New CDs for Burrs • Do not store CDs in areas exposed to direct When playing a new CD for the first time, check or warped can cause the sound to sunlight (such as a car seat or the dashboard) that there are not any burrs stuck to the skip and the unit to operate or other hot places. perimeter of the disc or in the central hole. CDs incorrectly, resulting in worsened A CD-R or CD-RW is more susceptible than a with b
ページ6に含まれる内容の要旨
General features Power 5ANGLE RTN 5∞ ATT 4 ¢ FM Turning on the power: Press the SRC (source) button. NOTE Turn the power on before carrying out the following procedures. Turning off the power: Press the PWR OFF button for at least one second. Switching Modes DISP Switching Modes: Each time you press the SRC (source) button, the mode switches as follows: ▼ Tuner mode ▼ SRC/PWR OFF ANGLE∞ DISP AM Tape mode AUD ▼ CD mode ▼ External disc control mode ▼ Standby mode Selecting standby mode: Press the
ページ7に含まれる内容の要旨
Volume Audio Control Setting Adjust various sound levels. Increasing Volume: Press the 5 button to turn up the volume. 1 Press the AUD button twice to enter the control mode. Decreasing Volume: 2 Press either the 4 or ¢ button. Press the ∞ button to turn down the volume. Each time the button is pressed, the adjustment mode will change as follows: Pressing the ¢ button advances the display, and pressing the 4 button reverses it. Attenuator "Balance" This function allows you to turn down the volu
ページ8に含まれる内容の要旨
General features Panel Angle Adjustment Switching Display You can adjust the panel angle for easy viewing. You can switch the display during the standby mode as mentioned below. Sliding the panel: Switching the Display During the Standby Mode: Press the ANGLE∞ button. Each time you press the DISP button during the standby mode, Each time you press the ANGLE∞ button, the panel will slide the display switches as follows: one step at a time.The faceplate angle can be varied in up to ten steps. Char
ページ9に含まれる内容の要旨
Tuner features Tuning CRSC 4 ¢ FM 1 Press the SRC (source) button repeatedly to select the tuner mode. "TUNER" is displayed when the tuner mode has been selected. 2 Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3. Press the AM button to select the AM band. 3 • Auto Seek Tuning Press the ¢ button to seek higher frequencies. Press the 4 button to seek lower frequencies. • Manual Tuning DISP Press the ¢ button to
ページ10に含まれる内容の要旨
Tuner features Preset Tuning Switching Display for Tuner You can recall a station being preset in preset station buttons You can change the display used when listening to the radio. (#1-6). Changing the Display: Recalling a Preset Station: Each time you press the DISP button, the display changes as Press the preset station button (#1-6) for the desired station. follows: The number of the recalled station is displayed. Station frequency "SNPS" Clean Reception System Circuit (CRSC) "Character" Tem
ページ11に含まれる内容の要旨
Station Name Preset (SNPS) Character Button to press # Times pressed You can assign names to radio stations with the Station Preset #3 1 Memory. Up to 30 stations can be assigned names. “D” #2 1 “A” 1 Adjust the frequency to the station whose name you want to enter. #6 2 “N” NOTE #2 3 “C” This function cannot be available during the clock display. #3 2 “E” 2 Press the NAME button for at least two seconds. “Name Set” is displayed once the station name preset mode is 5 Continue steps 3 and 4 until
ページ12に含まれる内容の要旨
Tuner features Cassette player features Station Name Preset Play (SNPP) CASSETTE EJECT You can search for the station for any station if its name has 4 ¢ FM been preset using Station Name Preset. 1 Press the SBF button for at least one second. “SBF SNPS” will be displayed once the station name preset play mode is entered. The names of the stations stored in the band currently listened to are displayed in the following order for five seconds each: = FM1 Ô FM2 Ô FM3 Ô AM + Each time you press the
ページ13に含まれる内容の要旨
Playing Cassette Tapes Fast Forwarding and Rewinding Cassette Tapes Loading and Playing Cassettes: Fast Forwarding Tapes: Press the CASSETTE EJECT button to slide open the front Press the FM button. panel, showing the cassette (insertion) slot. Holding the Rewinding Tapes: cassette with the tape exposed to the right, insert in the slot. Press the AM button. The front panel will close, and the tape will start playing. Canceling: The indicator lights up when a cassette has been loaded. Pres
ページ14に含まれる内容の要旨
Cassette player features Using Direct Program Search System (DPSS) 1 Enter the number of tracks you want to skip using the numeric Skip forward or backward to other tracks during playback. buttons on the remote control. Up to 9 tracks can be skipped. Skipping to Beginning of Current Track or to Previous Tracks 2 Press either the 4 or ¢ button while the number is (Rewind DPSS): displayed, depending on whether you want to skip backwards Press the 4 button. or forwards. Press once to rewind to the
ページ15に含まれる内容の要旨
Index Scan Switching Display Successively plays the first ten seconds of each track on the Switching the display during the tape mode: tape. Each time you press the DISP button, the display switches as follows: Turning Index Scan On/Off: Press the SCN button to switch index scan on/off. The SCN indicator lights up when index scan is turned on. Tape counter Stopping to Listen to the Track Being Scanned: "Character" Press either the SCN or 38 button. Playback begins as usual. "Clock" NOTE • Index
ページ16に含まれる内容の要旨
CD/External disc control features Playing CDs CD EJECT 4 ¢ DISC+ Play: Press the CD EJECT button to slide open the front panel, showing the CD (insertion) slot. Holding the CD with the labeled side facing up, insert it in the slot. The front panel will close, and the CD will start playing. The indicator will light when a CD has been inserted. Playing CDs Already Inserted: Press the SRC button repeatedly to select the CD mode. "CD" is displayed when the CD mode has been selected. The CD wil
ページ17に含まれる内容の要旨
• Do not apply excessive force to the front panel after it slides. Switching Display for Discs • Do not use the unit with the front panel in the slid condition. Switch the display that appears while discs are playing. Doing so will cause breakdown. NOTE Switching Display for Discs: Each time you press the DISP button, the display during disc play When you load a CD and eject it right away, the next time you try switches as follows. to insert the CD may not load. In such a situation, take the CD
ページ18に含まれる内容の要旨
CD/External disc control features Fast Forwarding and Reversing Disc Play Disc Search (Function of disc changers) Search forward or backward through the discs in a disc Fast Forwarding Disc Play: changer. Hold down on the ¢ button. Release your finger to play the disc at that point. Making a Reverse Disc Search: Press the DISC– button to display the desired disc number. Reversing Disc Play: Each time the button is pressed, the displayed disc number Hold down on the 4 button. decreases by one. Re
ページ19に含まれる内容の要旨
NOTE Track / Disc Repeat You cannot use the direct track search function while doing track Repeat playing the track or the disc currently being listened to. or disc scans or using random or magazine-random play. Turning Repeat Play On/Off: Press the REP button to switch repeat track/disc play on and off as follows: ▼ Track Repeat ON Direct Disc Search Function of disc changers with remote ▼ (See page 36) Disc Repeat ON (Function of disc changers) ▼ Using the remote, directly input the disc numb
ページ20に含まれる内容の要旨
CD/External disc control features Disc Scan (Function of disc changers) Magazine Random Play (Function of disc changers) Successively play the beginning of each disc on a changer until Play the tracks on all the discs in the disc changer in random you find the one that you want to listen to. order. Starting the disc scan: 1 Press the M.RDM button to switch magazine random play on Press the D.SCN button. The D.SCN indicator lights up and the and off. first 10 seconds of each disc will be played,
