ページ1に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:00 PM Page 1
DOUBLE DIN SIZED CD/CASSETTE RECEIVER
DPX-5050
INSTRUCTION MANUAL
DPX-5030
DPX-4020
© B64-1942-20/00 (MW)
ページ2に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:00 PM Page 2 Contents Safety precautions Disc Search.................................................................................20 Safety precautions ........................................................................3 Direct Track Search.....................................................................20 Handling Compact discs ...............................................................5 Direct Disc Search .........................................
ページ3に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:00 PM Page 3 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About CD players/disc changers To prevent injury or fire, take the To prevent damage to the machine, connected to this unit following precautions: take the following precautions: KENWOOD disc changers/ CD players • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative released in 1998 or later can be connected to locked in place. Otherwise it may fall ou
ページ4に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:00 PM Page 4 Safety precautions Cleaning the Unit Cleaning the Tape Head NOTE If the faceplate of this unit is stained, wipe it After you have listened to many cassettes • If you experience problems during with a dry soft cloth such as a silicon cloth. over a long period of time, magnetic powder installation, consult your Kenwood dealer. If the faceplate is stained badly, wipe the from the tapes and dust accumulates on the stain off with a cloth moistened with neu
ページ5に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:00 PM Page 5 Handling Compact discs Playing a CD that is dirty, scratched Storing CDs Checking New CDs for Burrs • Do not store CDs in areas exposed to When playing a new CD for the first time, or warped can cause the sound to direct sunlight (such as a car seat or the check that there are not any burrs stuck to skip and the unit to operate dashboard) or other hot places. A CD-R or the perimeter of the disc or in the central incorrectly, resulting in worsened CD-R
ページ6に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:00 PM Page 6 Handling Compact discs Do Not Load CD Accessories Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Do not use commercially available CD • Be sure to use round shape CDs only for Labeled Side accessories that can be loaded into the CD this unit and do not use any special shape Do not use the CD with the label sticker slot, such as stabilizers, protective sheets, CDs. Use of special shape CDs may cause stuck on it. or CD cleaning discs, s
ページ7に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:00 PM Page 7 General features Power Turning on the power: Press the SRC (source) button. DISP NOTE ¢ Turn the power on before carrying out the following procedures. 4 SRC/ PWR OFF Turning off the power: 5 S.A Press the PWR OFF button for at least one second. ∞ FM AM Volume Increasing Volume: AUD ATT Press the 5 button to turn up the volume. Decreasing Volume: Press the ∞ button to turn down the volume. Spectrum analyzer display Attenuator This function allows you
ページ8に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:00 PM Page 8 General features Switching Modes 1 Press the AUD button for at least one second to enter the control mode. Switching Modes: 2 Selecting mode Each time you press the SRC (source) button, the mode Press either the FM or AM button. switches as follows: Each time the button is pressed, the adjustment mode will ▼ change as follows: Tuner mode Pressing the FM button advances the display, and pressing the ▼ AM button reverses it. Tape mode ▼ CD mode Amp CTRL
ページ9に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:01 PM Page 9 Spectrum Analyzer Display Selection Sub Spectrum Analyzer Display Selection You can select the display to enjoy sounds with eyes. Switching the Sub Spectrum Analyzer Display: Press the S.A button for at least one second to the sub Switching the Spectrum Analyzer Display: analyzer display switches as follows; 1 Press the S.A button. ∞ "SPEANA mode" is displayed once the analyzer mode is "Peak Level" entered. ∞ "Vibroscope" 2 Each time you press the
ページ10に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:01 PM Page 10 General features Tuner features Switching Display You can switch the display during the standby mode and AUX mode as mentioned below. Changing the Display: ¢ DISP/ Each time you press the DISP button, the display changes as NAME.S 4 follows: SRC Standby mode AUX mode ▼ ▼ 38 Character + Graphic AUX FM ▼ ▼ AM Clock + Graphic Character ▼ ▼ Clock Clock ▼ Spectrum analyzer #1 - 6 CRSC AUTO indicator mc indicator Adjusting Time Adjust the time. 1 When the
ページ11に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:01 PM Page 11 Tuning 2 Press the DIRECT button. "----" is displayed for 10 seconds. 1 Press the SRC (source) button repeatedly to select the tuner If you make no input in the 10-second period, direct access mode. "TUNER" is displayed when the tuner mode has been tuning is automatically canceled. selected. 3 Enter the frequency of the desired station. 2 Press either the FM or AM button to select the band. If you want to listen to an FM station at 92.1 MHz, for Each
ページ12に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:01 PM Page 12 Tuner features Clean Reception System Circuit (CRSC) Station frequency Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. SNPS name (only when being preset) The factory default for this function is ON. Character Turning CRSC On/Off: Press the CRSC button for at least one second to turn the Clock function on/off. "CRSC On" is displayed when CRSC is on. Spectrum analyzer The mc indicator
ページ13に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:01 PM Page 13 earliest will be the first one erased. • When this device is disconnected from the battery SNPS is Alphabet (upper case)/Numerals/Symbols: erased. A ~ Z 0~9 / + – • If you want to change the name of a station, first display the name of the station (following steps 1 and 2 above), then Alphabet (lower case)/Numerals/Symbols: change the letter(s) that you want by following steps 3 and 4. a ~ z 0~9 / + – NOTE Direct Alphabet Input (Function of remote wi
ページ14に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:01 PM Page 14 Cassette player features Playing Cassette Tapes Loading and Playing Cassettes: OPEN A press of the OPEN button results in the faceplate dropping open to the front, thereby exposing the cassette insertion slot. ¢ Holding the cassette with the tape exposed to the right, insert DISP 4 it in the slot. The tape will start playing. SRC Push back on the right side of the faceplate with your hand until it locks. 38 The indicator lights up when a cassette has
ページ15に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:01 PM Page 15 with the shift lever or something else. If this happens, pay Turn the MTL indicator off for normal tape (Type I) playback. attention to safety and move the shift lever or take an Turn the MTL indicator on for the following tape types: appropriate action, then operate the unit. CrO2 (Type II) FeCr (Type III) Metal (Type IV) • Do not apply excessive force to the open faceplate or place Selecting the wrong tape type may cause sound quality to object
ページ16に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:01 PM Page 16 Cassette player features • Sections recorded at low levels may trigger the blank skip Using DPSS with the Remote function if they last for 10 seconds or more. Directly input the number of tracks to skip during playback. 1 Enter the number of tracks you want to skip using the number buttons on the remote. Index Scan Up to nine tracks can be skipped. Successively plays the first few seconds of each track on the 2 Press either the 4 or ¢ button while th
ページ17に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:01 PM Page 17 CD/External disc control features sections that are recorded at low levels may trigger the function if they last for four seconds or more. 0 ¢ DISP/ Switching Display for Cassette Tapes NAME.S 4 Switching the Tape display : SRC Each time you press the DISP button, the display during tape play switches as follows: 38 DISC+ Tape counter DISC- Character 1 RDM M.RDM Clock SCN REP Spectrum analyzer indicator MD-LP indicator REP/D.REP indicator NOTE The ta
ページ18に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.2.24 11:04 AM Page 18 CD/External disc control features Mode Display Examples Playing CDs • "CD-CH"/"MD-CH"/"DISC-CH"...when a disc changer is connected Playing CDs: • "CD-CH1", "CD-CH2"/"MD-CH1", "MD-CH2"/"DISC-CH1", "DISC- If no CDs are inserted, insert one in the slot with the label CH2"...when two disc changers are connected facing up. If a CD is already inserted, press the SRC button repeatedly to Pausing and Restarting Disc Play: select the CD mode. Press the 38 bu
ページ19に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:02 PM Page 19 You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is Track time canceled when it reaches the beginning of a track, at which point normal play will automatically resume. Total disc playing time (CD only) Disc name (DNPS) (CD only) Disc title* (Units featuring CD text/MD only) Track Search Track title* (Units featuring CD text/MD only) Search forward or backward through the tracks on t
ページ20に含まれる内容の要旨
DPX-5050_M_r1_U.S 03.1.21 0:02 PM Page 20 CD/External disc control features Disc Search (Function of disc changers) Direct Disc Search (Function of disc changers with remote) Search forward or backward through the discs in a disc Using the remote, directly input the disc number that you changer. want to listen to. Making a Reverse Disc Search: 1 Using the number buttons on the remote, input the number of Press the DISC– button to display the desired disc number. the disc that you want to lis
