ページ1に含まれる内容の要旨
CD RECEIVER KD-ABT22
RECEPTOR CON CD KD-ABT22
RÉCEPTEUR CD KD-ABT22
For canceling the display demonstration, see page 5.
Para cancelar la demostración en pantalla, consulte la página 5.
Pour annuler la démonstration des affichages, référez-vous à la page 5.
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
Pour l’installation et les raccordements, se référer au manuel sép
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
ページ3に含まれる内容の要旨
How to reset your unit CONTENTS INTRODUCTIONS Preparation .................................................. 5 OPERATIONS Basic operations ........................................... 6 • Using the control panel ............................... 6 • Your preset adjustments will also be erased (except the • Using the remote controller (RM-RK50) ...... 7 registered Bluetooth device, see pages 13 and 14). Listening to the radio ................................... 8 How to forcibly eject a disc Di
ページ4に含まれる内容の要旨
How to use the M MODE and SEL Detaching the control panel buttons If you use M MODE or SEL (select), the display and some controls (such as the number buttons, 4 /¢ buttons, 5/∞ buttons, and the control dial) enter the corresponding control mode. Ex.: When you press number button 1 after pressing M MODE, to operate the FM tuner. Avoid touching the connectors. Attaching the control panel To use these controls for original functions, press M MODE again. • However, pressing SEL makes the u
ページ5に含まれる内容の要旨
Preparation Cancel the display demonstration and set the clock • See also pages 31 and 32. Turn on the power. 1 Enter the PSM settings. 2 Cancel the display demonstrations 3 Select “Demo,” then “Off.” Set the clock Select “Clock Hr” (hour), then adjust the hour. Select “Clock Min” (minute), then adjust the minute. Select “24H/12H,” then “24Hours” or “12Hours.” Finish the procedure. 4 Changing the display information and pattern When the power is turned off: Check the current clock time Ex.:
ページ6に含まれる内容の要旨
Basic operations Using the control panel • Select the source [Press] . 1 • TUNER: Select preset station. 1 2 2 2 • HD RADIO: Select channel. TUNER * /HD RADIO * = SIRIUS * /XM * = 2 2 2 2 • SIRIUS/XM: Select category. CD * = USB * (or USB-iPod) * = CD-CH * / 2 • CD/USB/CD-CH: Select folder. iPod * (or EXT IN) = BT-AUDIO = AUX IN • USB-iPod: Enter the main menu [Hold]. = (back to the beginning) • iPod: Enter the main menu/Pause playback/ 9 • Select/adjust the sound mode. Confirm selecti
ページ7に含まれる内容の要旨
Using the remote controller (RM-RK50) Installing the lithium coin battery (CR2025) Caution: For USA-California Only: Battery shall not be exposed to excessive heat such as This product contains a CR Coin Cell Lithium Battery sunshine, fire, or the like. which contains Perchlorate Material—special handling may apply. If the effectiveness of the remote controller See www.dtsc.ca.gov/hazardouswaste/perchlorate decreases, replace the battery. 1 • Turns the power on if pressed briefly or Befor
ページ8に含まれる内容の要旨
3 Adjusts the volume level. • While listening to the satellite (SIRIUS or XM) 4 Selects the sound mode (iEQ: intelligent equalizer). radio: 5 Selects the source. – Changes the channels if pressed briefly. 6 For Bluetooth cellular phone: – Changes the channels rapidly if pressed and – Answers calls if pressed briefly. held. • While listening to an iPod (in menu selecting – Rejects calls if pressed and held. – Holds calls if pressed briefly during phone call mode): conversation. Connected
ページ9に含まれる内容の要旨
Using the Preset Station list FM station automatic presetting • When is shown on the display, you can — SSM (Strong-station Sequential move back to the previous screen by pressing number Memory) button 3. You can preset up to six stations for each band. 1 Follow steps 1 and 2 of “Using the number 1 While listening to a station... buttons” on the left column. • By holding 5 / ∞, the Preset Station List will also appear (go to step 4). 2 2 3 3 Display the Preset Station List. Local F
ページ10に含まれる内容の要旨
Listening to the preset station on the Preset Station List 1 Display the Preset Station List, then select the preset station you want to listen to. 2 Change to the selected station. Disc operations All tracks will be played repeatedly until you change the Prohibiting disc ejection source or eject the disc. To cancel the prohibition, repeat the same procedure. To stop play and eject the disc • Press SOURCE to listen to another playback source. 1 Pressing (or holding) the following buttons allow
ページ11に含まれる内容の要旨
After pressing M MODE, press the following buttons to... 4 Select an item. Skip 10 tracks MP3/WMA/AAC: Within the same folder Repeat Track: Ex.: When “File” is selected in step 3 Repeat current track • You can move to the other lists by pressing Repeat Folder: number button 5 ( ) or 6 ( ) MP3/WMA/AAC: Repeat current repeatedly. folder Random Folder: 5 Change to the selected item. MP3/WMA/AAC: Randomly play all A If File List is selected tracks of current folder, then tracks The lis
ページ12に含まれる内容の要旨
Listening to the USB device 1 You can connect a USB mass storage class device such as a USB memory, Digital Audio Player * , portable HDD, etc. to the unit. • You can also connect an Apple iPod to the USB cable from the rear of the unit. For details of the operations, see pages 24 – 26. 1 2 This unit can play MP3/WMA/WMA-DRM10 * /AAC * /WAV tracks stored in a USB device. 1 * You can connect both MTP (Media Transfer Protocol) devices and USB mass storage class devices. See also page 40. 2 * Thi
ページ13に含まれる内容の要旨
Using the Bluetooth ® devices Connecting a Bluetooth device for the first time Pairing and PIN code Bluetooth is a short-range wireless radio When you connect a Bluetooth device to the unit communication technology for the mobile device such for the first time, make pairing between the unit as mobile phones, portable PCs, and other devices. The and the device. Pairing allows Bluetooth devices to Bluetooth devices can be connected without cables and communicate with each other. communica
ページ14に含まれる内容の要旨
4 Enter a PIN (Personal Identification Number) The device remains registered even after you code to the unit. disconnect the device. Use “Cnnct Phone“ or • You can enter any number you like (1-digit to “Cnnct Audio” (or activate “Auto Cnnct”) to 16-digit number). [Initial: 0000] connect the same device from next time on. (See the • To enter a PIN code less than 4-digit, firstly following and page 36.) delete the initial PIN code (0000) by pressing number button 5 ( ). Deleting a regi
ページ15に含まれる内容の要旨
3 Select the method to make a call. You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “Auto Cnnct” on page 36.) Disconnecting a device Perform steps 1 and 2 on page 13, then... • Dialed *: Shows the list of the phone numbers Select “Discn Phone” or “Discn Audio.” you have dialed. Go to the following step. • Received *: Shows the list of the received calls. Go to the following step. • Phonebook: Shows the name/phone number of the phone boo
ページ16に含まれる内容の要旨
When a call comes in.... How to enter phone number The source is automatically changed to “Bluetooth.” Select a number. • Phone number appears (if acquired). When “Auto Answer” is activated.... The unit answers the incoming calls automatically, see page 36. Move the entry position. • When “Auto Answer” is deactivated, press any button (except /control dial) to answer the incoming call. • You can adjust the microphone volume level (see Confirm the entry. page 36). To end the call or reject an
ページ17に含まれる内容の要旨
How to copy phone book Presetting the phone number You can copy the phone book memory of a cellular You can preset up to six phone numbers. phone into the unit. • When is shown on the display, you can • When is shown on the display, you can move back to the previous screen by pressing number move back to the previous screen by pressing number button 3. button 3. 1 Display the phone number you want to 1 preset by using one of the “Call” items. 2 Select “Settings.” 2 Select a phone numbe
ページ18に含まれる内容の要旨
Using the Bluetooth audio player • Operations and display indications differ depending on their availability on the connected audio player. Select “BT-AUDIO.” If playback does not start automatically, operate the Bluetooth audio player to start playback. After pressing M MODE, press the following buttons to... [Press] Reverse skip/forward skip [Hold] Reverse search/forward Repeat Track: Repeat current track search Repeat All: Select group/folder Repeat all tracks Repeat Group: Repeat all tra
ページ19に含まれる内容の要旨
Listening to the HD Radio ™ Broadcast Before operating, connect HD Radio tuner box, KT-HD300 (separately purchased) to the CD changer jack on the rear of the unit. What is HD Radio Technology? HD Radio Technology can deliver high-quality digital sound—AM digital will have FM-like quality (in stereo) and FM digital will have CD-like quality—with static-free and clear reception. Furthermore, stations can offer text and data, such as artist names and song titles. • When the HD Radio tuner box is
ページ20に含まれる内容の要旨
• If no sound can be heard from the selected setting, 2 change the setting to “Analog” or “Digital.” • The setting automatically changes to “Auto” if you tuned in to or change to another station, or if you turned off the power. • This setting cannot take effect for the conventional FM/AM stations. [Lights up] When holding the digital reception • If the radio station forces the reception mode to [Flashes] When holding the analog reception digital or analog, the DIGI or ANA indicator lights
