ページ1に含まれる内容の要旨
CD RECEIVER KD-SX8250/KD-SX780
RECEPTOR CON CD KD-SX8250/KD-SX780
RECEPTEUR CD KD-SX8250/KD-SX780
KD-SX8250
SOUND
U
R SOURCE F
D
VOL VOL
KD-SX780
SOUND
7
U
R SOURCE F
D
VOL VOL
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom
ページ2に含まれる内容の要旨
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
ページ3に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS .................. 14 How to use the number buttons ................ 3 Adjusting the sound ................................. 14 Selecting preset sound modes LOCATION OF THE BUTTONS ............ 4 (C-EQ: custom equalizer) .
ページ4に含まれる内容の要旨
LOCATION OF THE BUTTONS Control panel Display window s d f g h j kl / z 12437 56 8 200W MP3 INPUT 9p q w e r t yui o ; a 14 /¢ buttons ; EQ (equalizer) button 25 (up) button a MP3 INPUT jack 3° (down) button 4 Remote sensor Display window 5 Display window s Main display 60 (eject) button d Volume (or audio) level indicator 7 FM AM button Equalization pattern indicator 8 CD CD-CH/MP3 INPUT button f Tuner reception indicators 9 (standby/on/attenuator) button MO (monaural), ST (stereo) p (contro
ページ5に含まれる内容の要旨
2. Place the battery. Preparing the remote controller Slide the battery into the holder with the + side facing upwards so that the battery is fixed in Before using the remote controller: the holder. • Aim the remote controller directly at the remote Lithium coin battery sensor on the main unit. Make sure there is no (product number: obstacle in between. CR2025) Remote sensor 3. Return the battery holder. Insert again the battery holder pushing it until you hear a clicking sound. • Do not expose
ページ6に含まれる内容の要旨
3 • Selects the preset stations while listening to Remote controller the radio. Each time you press the button, the preset station number increases, and the selected RM–RK50 station is tuned in. • Skips to the previous disc while listening to the CD changer. Each time you press the button, the disc ATT SOUND number decreases, and the selected disc 1 5 starts playing. 4 Functions the same as the control dial on the 2 U 6 main unit. SOURCE R F NOTE: This button does not function for the preferred
ページ7に含まれる内容の要旨
BASIC OPERATIONS 200 12 3 Turning on the power 3 Adjust the volume. To increase the volume. 1 Turn on the power. To decrease the volume. Note on One-Touch Operation: Volume or audio When you select a source in step 2 below, the level (see page 19) power automatically comes on. You do not have indicator Volume level appears. to press this button to turn on the power. 2 Select the source. To select the tuner, press FM AM repeatedly. FM1 FM2 4 Adjust the sound as you want. AM FM3 (See pages 14 – 16
ページ8に含まれる内容の要旨
RADIO BASIC OPERATIONS 200 While searching stations, “SEEK” appears Listening to the radio on the display. When a station is received, searching stops. You can use either automatic searching or manual searching to tune in to a particular station. To stop searching before a station is received, press the same button you have pressed for Searching a station automatically: searching. Auto search Searching a station manually: 1 Select the band (FM1 – 3, AM). Manual search 1 Select the band (FM1 – 3,
ページ9に含まれる内容の要旨
3 Tune in to a station you want while Storing stations in memory “MANU” is flashing. Press ¢ to tune You can use one of the following two methods to in to stations of higher store broadcasting stations in memory. frequencies. • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations Press 4 to tune in to stations of lower FM station automatic preset: SSM frequencies. • If you release your finger from the button, You can preset 6 local
ページ10に含まれる内容の要旨
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. numbers. Ex.: Storing an FM station of 88.3 MHz into the Notes: preset number 1 of the FM1 band • A previously preset station is erased when a new station is stored in the same preset number. 1 Select the band (FM1 – 3, AM) you • Preset stations are erased when the power supply to want to store stations into (in this the memory circuit
ページ11に含まれる内容の要旨
CD OPERATIONS 200 Playing a CD Elapsed playing time Current track 1 Open the control panel. Changes to the clock time when “CLOCK” is set to “ON” (see page 19). Note: When an external component is connected to the MP3 Notes: INPUT jack on the control panel, be careful of • When a disc is in the loading slot, selecting “CD” handling a CD. as the source starts CD play. • When a disc is inserted upside down, the disc 2 Insert a disc into the loading slot. automatically ejects (if the control panel
ページ12に含まれる内容の要旨
Locating a track or particular Selecting CD playback modes portion on a disc To play back tracks at random (Random Play) You can play back all tracks on the disc at random. To fast-forward or reverse the track Press and hold ¢ 1 Press MODE to enter the functions while playing a disc, to mode while playing a disc. fast-forward the track. “MODE” appears on the lower part of the display, and the number buttons work as different function buttons. Press and hold 4 while playing a disc, to 2 Press R
ページ13に含まれる内容の要旨
To play back only intros (Intro Scan) Prohibiting CD ejection You can play back the first 15 seconds of each track sequentially. You can prohibit CD ejection and can lock a disc in the loading slot. 1 Press MODE to enter the functions mode while playing a disc. While pressing CD, press and hold “MODE” appears on the lower part of for more than 2 seconds. the display, and the number buttons work as different function buttons. 2 Press INT (intro), while “MODE” is still on the display. Each time y
ページ14に含まれる内容の要旨
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level. To increase the level. You can adjust the sound characteristics to your preference. To decrease the level. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as Equalization pattern changes as follows: you adjust the bass or treble. BAS TRE FAD BAL (bass) (treble) (fader) (balance) VOL WOOFER LOUD (volume) (only for KD-SX8250) (loudness) Note: Indication To do: Range Normally the control dial
ページ15に含まれる内容の要旨
Indication For: Preset values Selecting preset sound modes BAS TRE LOUD (C-EQ: custom equalizer) USER (Flat sound) 00 00 OFF ROCK Rock or +03 +01 ON You can select a preset sound mode (C-EQ: disco music Custom Equalizer) suitable to the music genre. CLASSIC Classical +01 –02 OFF music 1 Press EQ. POPS Light music +04 +01 OFF The last selected sound mode is HIP HOP Funk or Rap +02 00 ON recalled and applied to the music current sound. JAZZ Jazz music +02 +03 OFF Notes: • You can adjust each sound
ページ16に含まれる内容の要旨
• When “CEQ LINK” is set to “LINK ON,” 3 Adjust the level. The selected sound mode can be stored in memory for the current source. To increase the level. Each time you change to the same source, the same sound mode is also recalled and shown on the display. The C-EQ indicator also flashes. To decrease the level. • When “CEQ LINK” is set to “LINK OFF” The selected sound mode effect applies to any Equalization pattern source. changes as you adjust the bass or treble. Storing your own sound adjustm
ページ17に含まれる内容の要旨
OTHER MAIN FUNCTIONS To check the current clock time while the unit Setting the clock is turned off, press DISP (display). The power turns on, the clock time is shown for 5 seconds, then the power turns off. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM To check other information during play, press items appears on the display. DISP (display). (See page 18.) Each time you press the button, the other information (either the clock or the source name) will be shown on
ページ18に含まれる内容の要旨
4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the setting. Preferred Setting Mode (PSM) items 1 2 3 Factory-preset See Set. settings page Counter- clockwise Clockwise Hold. Select. CLOCK H Hour adjustment Back Advance 1:00 17 CLOCK M Minute adjustment Back Advance CEQ LINK Custom equalizer link LINK OFF LINK ON LINK OFF 15, 19 CLOCK Clock display OFF ON ON 19 LEVEL Level display AUDIO 1 AUDIO 2 AUDIO 2 19 OFF DIMMER* Dimmer mode AUTO OFF AUTO 19 ON OFF ON ON 19 BEE
ページ19に含まれる内容の要旨
Note: To set Custom Equalizer Link – CEQ LINK Auto Dimmer equipped with this unit may not work A different sound mode (C-EQ) can be stored in correctly on some vehicles, particularly on those memory for each source so that you can change having a control dial for dimming. the sound modes simply by changing the sources. In this case, set the dimmer mode to “ON” or “OFF.” When shipped from the factory, this mode is deactivated. To turn on/off the key-touch tone – BEEP • LINK ON: Different sound mo
ページ20に含まれる内容の要旨
Attaching the control panel Detaching the control panel 1 Insert the right side of the control panel You can detach the control panel when leaving into the groove on the panel holder. the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 2 Press the left side of the control panel to fix it to the panel h
